#Translations for language [en-us] #2011/03/29 17:05:10.049 GMT+2 (escala_maxima)=(Maximum scale) (escala_minima)=(Minimum scale) 0=0 1=1 10_paginas_delante= 1\:=1 2X= 4X=4X A0=A0 A1=A1 A2=A2 A3=A3 A4=A4 A5=A5 A6=A6 ADJACENT_POLYGON_TOOL_NAME=Digitize adjacent polygon ADVANCED_AFFINE_TRANSFORM=Affine transformation with constraints AFFINE_TRANSFORM=Affine transformation ARC=ARC AREA=Area AWT=Yes Abrir=Choose... Abrir_Geoproceso=Open tool... Abrir_Imagen= Abrir_una_capa=Open layer Ac_north= Accept=Ok Accion_Predefinida=Predefined action Acciones=Actions Acciones_muestra_atributos=Attribute table shortcut Accumulated_distance= Aceptar=Ok Acres=Acres Action=Action Actions=Actions Activar_WOW= Activar_intervalo= Activar_profundidad_maxima= Active= Active_north= Activo=Active AddLyrDeleteErrors_WARNING=Adding a layer to a topology with errors will trigger another validation.\nContinue? Add_Lyr=Add layer Add_Rule=Add... Add_VError=Add error vector Add_Vector=Add Add_action=Add action Add_geometric_information_to_layer_process=Add geometry information to layer Added_buffer_areas_to_TOC= Added_layer_with_influence_areas_to_TOC=Added layer with buffer zones to TOC. Advanced_Hyperlink=Advanced hyperlink Agregacion=Aggregation Agregacion_Desc=Geoprocessing tools that transform individual level data to group level data. Agudeza=Sharpness Aitoff=Aitoff Ajustar_cobertura_wcs= Ajustar_transparencia=Adjust transparency Al_leer_la_leyenda=Reading legend Albers_Conic_Equal_Area=Albers Conic Equal Area All_supported_files=All supported files Altura_en_metros= Altura_fija= Altura_fija_de_texto=Fixed text height An_exception_happened=An exception (fatal error) occurred. Anadir=Add Anadir\ capa\ de\ eventos= Anadir_Capa=Add layer... Anadir_al_conjunto=Add to selection Anadir_capa=Add layer... Anadir_capa_de_eventos=Add points from table... Anadir_tema_de_eventos= Anadir_todos=Add all Anaglyphic= Analisis=Analysis Analisis_Desc=Geoprocessing tools that generate new information from existing data. Ancho_Contorno= Ancho_de_linea= Animacion=Animation Annotation_layer=Annotation layer Annotation_layer_not_valid=Invalid annotation layer Annotation_layers=Annotation layers Annotations= Anterior=Previous Antialiasing= Aplicar=Apply Aplicar_tolerancia_de_dangles=Apply dangling lines tolerance Aplicar_tolerancia_de_snap=Apply fuzzy tolerance Aplicar_un_CLEAN_sobre_la_capa_original=Clean layer topology first Apply=Apply Archivo=File Archivos_de_Disco= Area=Area Area_de_influencia=Buffer zones Area_de_influencia_definida_por_un_campo=Buffer distances in attribute table field Area_de_influencia_definida_por_una_distancia=Constant buffer distance Areas=Areas Areas_de_influencia= Areas_de_influencia._Introduccion_de_datos=Data input for buffer zones Arrival_to=Arrive at Ascending=Ascending Asistente_de_geoprocesamiento=Geoprocessing wizard Associated_layer=Assoc. layer At_the_bottom=At the bottom Atributo=Attribute Atributos_Numericos=Numeric attributes Ayuda=Help Azimut_Navigation= Azimuthal_Equidistant=Azimuthal equidistant A\u00f1adir_al_TOC_geometrias_erroneas=Add layer with faulty geometries to TOC BATCH_FIX=Batch fix BATCH_FIXING=Batch fixing topological errors BEZIER=Bezier BRX=Right X BRY=Right Y BURSA_WOLF_TRANSFORM=Bursa-Wolf transformation B_SPLINE=B-spline Back= Background_Color=Background color\: Bajar_capa=Move layer down Band_Value=Band value Bin_width_12= Bin_width_12= Bin_width_12.5_metres=Bin width 12.5 meters Bin_width_165_US_survey_feet=Bin width 165 US survey feet Bin_width_25_metres=Bin width 25 meters Bin_width_3= Bin_width_3= Bin_width_3.125_metres=Bin width 3.125 meters Bin_width_330_US_survey_feet=Bin width 330 US survey feet Bin_width_37= Bin_width_37= Bin_width_37.5_metres=Bin width 37.5 meters Bin_width_6= Bin_width_6= Bin_width_6.25_metres= Bin_width_6.25_metresBin=width 6.25 meters Bin_width_6.25_metresBin=width 6.25 meters Bin_width_82= Bin_width_82= Bin_width_82.5_US_survey_feet=Bin width 82.5 US survey feet Block_Size_= Bold=Bold Bonne=Bonne Both=Both Brightness=Brightness British_chain_(Benoit_1895_A)=British chains (Benoit 1895 A) British_chain_(Benoit_1895_B)=British chains (Benoit 1895 B) British_chain_(Sears_1922)=British chains (Sears 1922) British_chain_(Sears_1922_truncated)=British chains (Sears 1922 truncated) British_foot_(1865)=British feet (1865) British_foot_(1936)=British feet (1936) British_foot_(Benoit_1895_A)=British feet (Benoit 1895 A) British_foot_(Benoit_1895_B)=British feet (Benoit 1895 B) British_foot_(Sears_1922)=British feet (Sears 1922) British_foot_(Sears_1922_truncated)=British feet (Sears 1922 truncated) British_link_(Benoit_1895_A)=British links (Benoit 1895 A) British_link_(Benoit_1895_B)=British links (Benoit 1895 B) British_link_(Sears_1922)=British links (Sears 1922) British_link_(Sears_1922_truncated)=British links (Sears 1922 truncated) British_yard_(Benoit_1895_A)=British yards (Benoit 1895 A) British_yard_(Benoit_1895_B)=British yards (Benoit 1895 B) British_yard_(Sears_1922)=British yards (Sears 1922) British_yard_(Sears_1922_truncated)=British yards (Sears 1922 truncated) Buffer_cap=Buffer cap Buffer_information=Buffer information Buffer_width=Buffer width Build=Build polygons Build_de_poligonos=Build polygons from lines CARDINAL_SPLINE=Cardinal spline CATMULLROM_SPLINE=Catmull-Rom spline CIRCLE=CIRCLE COMP=COMP COMPLETE_UNDERSHOOT_FIX=Finalize line COMPUTE_CLEAN=Clean topology COUNT=COUNT CREATE_FEATURE_OVERLAP_AREA_FIX=Create new polygon from area of overlap CREATE_NEW_FEATURE_FOR_GAPS=Create new polygon to cover gap CSVStringDriver= CUBIC_BSPLINE=Cubic B-spline CURVE_TYPE=Curve type\: Calcular_Thiessen=Voronoi (Thiessen) polygons Calcular_Tin=Delaunay triangulation Calcular_intervalos=Compute intervals Calcular_la_red_sobre_la_capa_original=Use original layer data Calculate= Calculate_Service_Areas= Cambio_Color=Change color Cambio_Estilo= Cambio_de_estilo= Cambios_de_estilo= Campo=Field Campo_clasifica= Campo_de_clasificacion=Classification field Campo_de_etiquetado=Field with label text Campo_para_disolver=Field to dissolve on Campos=Fields Cancel=Cancel Cancelar=Cancel Cant_process_this_layer=Cannot process this layer. Capa=Layer Capa_Raster= Capa_Vectorial= Capas=Layers Capas_A_A\u00f1adir_A_La_Topologia=Layers to add to the topology Capas_del_directorio=Files in directory Capas_del_localizador=Locator layers Cascada=Cascade Cassini_Soldner=Cassini Soldner Catalog= Catalogo=Geodata online search tools Centimetros=Centimeters Central_meridian=Central meridian Centrar_la_Vista_sobre_un_punto=Center view on point... Cerrar=Close Check_Text= Chew_Incremental_TIN_based_in_a_bounding_triangle=Chew's incremental constrained triangulation Choose_target_file_DBF=Choose output file (DBF format) CircleCADTool= CircleCADTool= CircleCADTool.3p=3P Circulo= Circumference= Clarke's_chain=Clarke's chains Clarke's_foot=Clarke's feet Clarke's_link=Clarke's links Clarke's_yard=Clarke's yards Clean=Clear Clean_Test=Clean Clean_de_lineas=Automatic correction of topological errors Clean_selection=Clear selection Clear=Delete Clear_Barriers=Delete all barriers Clear_Flags=Delete all stops Clear_Routes=Delete all routes Close= Close_multiline=Close polylines Closest_Facility=Closest facility... Cobertura_de_datos=Data layer Cobertura_de_entrada=Input layer Cobertura_de_interseccion= Cobertura_de_recorte=Overlay layer Cobertura_de_salida=Output layer Cobertura_para_unir= Coberturas= Coberturas_de_entrada=Input layers Color_Contorno= Color_de_Relleno= Color_de_la_Linea= Color_final=Last color\: Color_inicial= Color_inicio=First color\: Commentaries=Description\: Compare=Compare ComplexSelectionCADTool.crosscircle=CC ComplexSelectionCADTool.crosspolygon=CP ComplexSelectionCADTool.end=E ComplexSelectionCADTool.introcircle=IC ComplexSelectionCADTool.intropolygon=IP ComplexSelectionCADTool.outcircle=OC ComplexSelectionCADTool.outpolygon=OP ComplexSelectionCADTool.outrectangle=OR Compression_= Compute_Build=Convert to polygon layer Compute_Clean=Clean topology Concordancia=Match Configurar= Configurar_localizador=Configure locator... Connectivity= Consola=Console Consola_de_jython=Jython console Consola_de_jython_tooltip=Open a Jython console Contengan=contain Contrast=Contrast Control_points=Control points Control_points_coordinates_dimension_are_insufficient_for_the_current_transform=This transformation requires control points of a higher coordinates dimension. Control_points_have_inconsistent_reference_system=Control points have inconsistent reference system. Conversion_de_datos=Data conversion Conversion_de_datos_Desc=Geoprocessing tools that transform data (e.g. format conversion and reprojection). Convex_Hull=Convex hull Convex_Hull._Introduccion_de_datos=Data input for convex hull\: Coordinates=Coordinates Coordinates_of_the_centre= Couldnt_find_column=Column not found Craster_Parabolic=Craster Parabolic Crear_Buffer=Buffer zones for polygons\: Crear_Indice=Create spatial index... Crear_Indice_Intro= Crear_Indice_Pregunta_1=Create a spatial index for the layer? Crear_Indice_Pregunta_2=? Crear_capa_osg= Create_Network=Generate topology... Create_Open_layer=Create/open layer Create_TIN=Create TIN (Delaunay) Create_Topology=Create topology Creating_layer_with_buffers= Creating_layer_with_influence_areas=Creating layer with areas of influence... Creating_temp_file=Creating temporary file... Creation_Date=Creation date\: Creation_derivative_geometry_layer_process=Create a new layer with derived geometries. Crucen_con=cross over Cruz= Cuadrado= Cylindrical_Equal_Area=Cylindrical Equal Area DBF= DBF_files=DBF files DBManager=Database manager DELETE_FIX=Delete feature DGNFiles= Dado_un_campo_de_atributos=Given an attribute field for classification Dat_CodeCrs=Code Dat_Datum=Name of datum\: Dat_DefinirPor=Define for\: Dat_Elips=Name of ellipsoid\: Dat_Importar=Import Dat_InvF=Inverse flattening Dat_InvFToolTipText=The inverse flattening parameter is used to specify the shape of the spheroid Dat_Long=Longitude\: Dat_Meridian=Name of meridian\: Dat_NombreCrs=Name Dat_SemMay=Semi-major axis Dat_SemMayToolTipText=The semi-major axis defines the size of the ellipsoid in south to north direction Dat_SemMen=Semi-minor axis Dat_SemMenToolTipText=The semi-major axis defines the size of the ellipsoid in west to east direction Dat_nDatum=Datum Dat_nElipsoide=Ellipsoid Dat_nMeridian=Meridian Data_source_not_initialized=Datasource not initialized. Date=Date De=of Debe_seleccionar_un_\u00fanico_elemento=Please select a unique element. Debe_seleccionar_una_capa_de_lineas_en_el_TOC=Please select a line vector layer from the TOC. Decimetros=Decimeters DefCrsUsr_Seleccionar_Crs=Select recently used SRS DefCrsUsr_existente=From an existing SRS\: DefCrsUsr_importar_wkt=Import WKT string DefCrsUsr_nuevo=From user definitions DefCrsUsr_wkt=From a WKT string\: Default_Navigation= Default_order_manager=Default ordering manager\: Define_the_labeling_expression_=Define labeling expression Defines_a_dot_density_symbol_based_on_a_field_value=Show differences in field values using dot densities Delete_VError=Delete Dentro=Internal Dentro_y_fuera=Internal and external Derecha=Right Derecho=Right Derivative_geometries_control_panel_listener_removed=Removed derived geometries control panel listener. Des_north= Descending=Descending Descripcion= Desea_a\u00f1adir_capa_con_geometrias_que_no_forman_parte_de_poligonos=Add layer with nodes and edges that are not part of a polygon? Desea_a\u00f1adir_capa_con_pseudonodos=Add layer with detected pseudo nodes? Desea_calcular_el_build_solo_con_las_polilineas_seleccionadas=Include only selected lines? Desea_calcular_el_clean_solo_con_las_polilineas_seleccionadas=Include only selected lines? Desplazamiento=Panning Destination_layer_type=Target layer type Detalles= Devuelvo_el_foco_a_=Returns focus to Diferencia=Difference Diferencia_Introduccion_de_datos=Data input for difference Disolver=Dissolve Disolver._Introduccion_de_datos=Data input for dissolve Disolver_entidades=Merge overlapping zones Display= Distancia_dangle_incorrecta=Invalid format for dangling lines tolerance value. Distancia_interocular= Distancia_pantalla= Distancia_snap_incorrecta=Invalid format for fuzzy tolerance value. Dont_close=Cancel Dxffiles=AutoCAD Drawing Exchange Format (*.dxf) ELLIPSE=ELLIPSE EMPTY_STATUS=Empty topology. EPSG=EPSG ERROR=Error ERRORS=Errors ERROR_FIX_ERROR=Failed to apply correction. ERROR_FIX_SUCCESS=Correction applied successfully. ERROR_INSPECTOR_ALL_RULES=All rules ERROR_INSPECTOR_TITLE=Review topological errors\: ESRI=ESRI EXCEPTIONS=Exclusions EXTEND_DANGLE_FIX=Extrude dangling node to touch nearest geometry EXTEND_DANGLE_TO_BOUNDARY_FIX=Snap dangling node to nearest boundary node East= Eckert_I=Eckert I Eckert_II=Eckert II Eckert_III=Eckert III Eckert_IV=Eckert IV Eckert_V=Eckert V Eckert_VI=Eckert VI EditVertexCADTool.addvertex=A EditVertexCADTool.delvertex=D EditVertexCADTool.nextvertex=N EditVertexCADTool.previousvertex=P Editar_leyenda=Properties Edition=Editing Edition_Properties=Editing settings... Ejecutando= Ejecutando\ comando= Ejecutando\ comando\:=Execute=command\: Ejecutando\ comando\:\=Execute command\: Elegir_Color=Select color Elegir_Fuente=Select font Elegir_pantalla= Elementos_seleccionados_de_la_capa=... selected features in layer\: Elevacion= Elevation_layer_question= Elija_una_herramienta_de_analisis=Choose an analysis tool Eliminar=Delete En_metros=In meters En_pixels=In pixels Enable_hyperlink=Enable hyperlinks Enable_layer_preview=Enable layer preview Encoding=Character encoding Encuadre=Zoom manager... Encuadre_Vista=Panning Enlace_espacial=Spatial join Enlace_espacial._Introduccion_de_datos=Data input for spatial join Enlazar_a_documento_PDF=Link to PDF document Enlazar_a_fichero_de_texto=Link to text files Enlazar_a_ficheros_de_imagen=Link to image files Enlazar_a_imagen_SVG=Link to SVG drawing Equidistance_= Equidistant_Conic=Equidistant Conic Equirectangular=Equirectangular Error=Error Error\ creating\ table\ aliases= Error\ reading\ layer\ fields= Error_De_Acceso_Datos=Data access error. Error_abriendo_el_fichero= Error_accediendo_a_los_datos=Data access error. Error_al_calcular_RMS=Error computing RMS. Error_atributo_no_numerico=Please provide a numeric value for the buffer distance field. Error_calculo_transformacion=Error computing transformation. Error_capa_vacia=Result layer is empty.\nCheck for a possible error. Error_cargando_links=Failed to load error vectors. Error_chequeando_precondiciones=Error verifying requirements. Error_chequeo_tipo_geometria=Error while checking geometry type. Error_computing_RMS=Error computing RMS. Error_creating_annotation_layer=Error creating annotation layer. Error_creating_mathTransform=Error in transformation equation. Error_creating_new_table=Error creating the new table. Error_distancia_buffer=Please provide a buffer distance. Error_ejecucion=An error occurred while running the geoprocessing tool. Error_entrada_datos=Data entry error. Error_escritura_resultados=Error writing result data. Error_evaluationg_expression=Error evaluating expression. Error_exportando_SLD=Error exporting SLD. Error_exportando_las_estadisticas=Error exporting statistics. Error_fallo_geoproceso=Failed to execute geoprocessing tool. Error_getting_table_fields=Error obtaining table fields. Error_guardando_la_leyenda=Error saving legend. Error_guardando_la_plantilla=Error saving template. Error_in_Autocomplete_Polygon_Tool_= Error_loading_driver=Error loading driver Error_offset_no_numerico=Error. Offset values provided are invalid. Error_opening_annotation_layer=Error opening annotation layer. Error_preparar_escritura_resultados=Error generating results layer Error_proyecciones_iguales=Error. Source and target projections are identical. Error_reading_andami_config_New_file_created_A_backup_was_made_on_=Error reading configuration file 'andami-config.xml'\: New file created. A backup copy was saved in Error_reading_from_the_driver=Error reading from driver. Error_reading_isocodes_file=Error reading file with ISO language code. Error_reading_plugin_persinstence_New_file_created_A_backup_was_made_on_=Error reading configuration file 'plugin-persistence.xml'. New file created. A backup copy was saved in Error_seleccionar_capas_merge=Please select the layers to merge. Error_seleccionar_esquema_merge=Error selecting merge schema. Error_seleccionar_gp=Please select a geoprocessing tool. Error_seleccionar_gp_desc=You have selected a package. \nPackages are logical groups of geoprocessing tools. \nExpand the tree to see the package contents and select a tool to launch it. Error_seleccionar_resultado=Please specify a file for the output layer. Error_spjoinmn_sin_funcion=Please select aggregation functions for all numerical attributes to transfer. Error_summarizing_table=Error summarizing table. Error_updating_user_DB_Probably_it_is_locked_by_other_process=Error updating user DB. Probably it is locked by another process Errors=Errors Escala=Scale Escala_Maxima=Maximum scale Escala_Minima=Minimum scale EscaladoX= EscaladoY= EscaladoZ= Escoger_Fun_Resumen=<- Especifique_fichero_shp_resultante=You will now be asked to specify a shapefile for \nstoring the cleaned network layer. Este\ fichero\ no\ es\ posible\ abirlo\ como\n\ \ \ \ \ \ \ \ //\ capa\ de\ anotaciones= Esten_contenidos_en=are contained in Estilo= Etiqueta=Label Etiquetado= Etiquetados=Labeling Etiquetas_estandar=Standard labels Evaluate_Topology=Validate topology Examinar=Choose... Examine= Excel= Exception=Excluded Exception_adding_geometric_info=Error aggregating geometry information. Ext3D.latitude= Ext3D.longitude= Extension=Extension Extent=Extent Extrusion= FACTORY_EXCEPTION=Error creating transformation. FEATURE_ID=FID FFrameBasic= FFrameGraphics= FFrameGrid= FFrameGroup= FFrameLegend= FFrameNorth= FFrameOverView= FFramePicture= FFrameScaleBar= FFrameSymbol= FFrameTable= FFrameText= FFrameView= FIXING_ERROR=Fixing topological errors... FMAPMUSTBECLOSED=All polygon geometries of A must be closed Factor= Failed_adding_the_layer_to_TOC=Failed adding layer to view. Failed_calculating_area_of_geometry=Failed to calculate geometry area. Failed_calculating_geometry_points=Failed to calculate geometry points. Failed_calculating_perimeter_of_geometry=Failed to calculate geometry perimeter. Failed_canceling_the_current_task_of_creation_a_buffer_layer= Failed_canceling_the_layer=Failed to cancel the layer. Failed_creating_XML_document=Failed to create XML document. Failed_creating_geometry=Failed to create geometry. Failed_creating_the_new_layer=Failed to create the new layer. Failed_creating_the_temporal_layer=Failed to create temporary layer. Failed_creting_new_field=Failed to create new field. Failed_doing_backup_of_project_to_be_overwritten=Failed to backup the project file to be overwritten. Failed_filling_table=Failed to populate table. Failed_finishing_the_derivative_geometries_tool_in_layer=Failed to complete computation of derivative geometries for layer Failed_getting_a_geometry_a_line_wont_be_created=Failed to retrieve geometry. Line will not be created. Failed_getting_a_geometry_a_polygon_wont_be_created=Failed to retrieve geometry. Polygon will not be created. Failed_getting_geometries= Failed_getting_geometry=Failed to retrieve geometry. Failed_getting_the_features_indexes=Failed to retrieve feature index. Failed_initializing_the_backup_of_previous_project_to_be_overwritten_extension=Failed to initialize extension for backing up project files. Failed_loading_features=Failed to load features. Failed_loading_fields=Failed to load fields. Failed_loading_the_project= Failed_loding_quick_info_tool_data_selection_panel=Failed to load data selection panel for Quick Info tool. Failed_pausing_the_process=Failed to pause processing. Failed_processing_the_geometries=Failed to process geometries. Failed_reloading_the_layer= Failed_restoring_active_layers=Failed to restore active layers. Failed_restoring_layer_fields_should_remove_and_add_the_layer_to_have_consistent_data=Failed to restore layer's attribute table fields,\nPlease delete layer from TOC and add it again to restore consistent state. Failed_restoring_layer_in_edition_mode=Failed to restore layer in editing mode. Failed_resuming_the_process=Failed to resume processing. Failed_saving_active_layer_indexes=Failed to save indices for active layers. Failed_saving_the_layer=Failed to save the layer. Failed_selecting_geometries=Failed to select geometries. Failed_selecting_geometries_by_circle_topology_exception_explanation=Failed to select geometries in layer.\nThe circular selection area intersects some faulty geometries. Please revise input data. Failed_selecting_geometries_by_polyline_topology_exception_explanation=Failed to select geometries in layer.\nThe polygonal selection area intersects some faulty geometries. Please revise input data. Failed_selecting_geometries_in_layer=Failed to select geometries from layer. Failed_selecting_layer=Failed to select layer. Failed_the_load=Failed to load. Failed_the_process=The process failed. Failed_the_process_Shouldnt_work_with_the_layer=The process failed. The result layer may be defective. Failed_transforming_XML_to_String=Failed to transform XML to string. Failed_unregistering_derivative_geometry_control_panel_listener=Failed to unregister control panel listener for Derivative Geometries Extension. Failed_updating_features=Failed to update features. Feature_1=Feature A Feature_2=Feature B Features=Features Fichero=File Fichero_para_capa_corregida=File for corrected layer Ficheros_ADF=Arc/Info Binary Grid (*.adf) Ficheros_DGN=MicroStation Design (*.dgn) Ficheros_DWG=CAD Drawing (*.dwg) Ficheros_ECW=ERMapper Compressed Wavelet (*.ecw) Ficheros_ERS=ERMapper (*.ers) Ficheros_EXP=Expression (*.exp) Ficheros_GGR=Gimp Gradient Ficheros_GIF=Graphics Interchange Format (*.gif) Ficheros_GPL=Gimp Palette Ficheros_GSB=Grid Shift Binary (*.gsb) Ficheros_IMG=ERDAS IMAGINE (*.img) Ficheros_KML=Keyhole Markup Language (*.kml) Ficheros_LAN=ERDAS 7 (*.lan, *.gis) Ficheros_MPL=ILWIS Raster Map (*.mpr, *.mpl) Ficheros_NET=Network (*.net) Ficheros_PGM=Netpbm Greyscale (*.pgm) Ficheros_PIX=PCI Geomatics Database File (*.pix) Ficheros_PPM=Netpbm RGB (*.ppm) Ficheros_PROP=Properties (*.properties) Ficheros_RAW=ERDAS IMAGINE Raw (*.raw) Ficheros_RMF=Raster Metafile (*.rmf) Ficheros_RST=IDRISI Raster (*.rst) Ficheros_SHP=Shapefile (*.shp) Ficheros_SID=MrSID (*.sid) Ficheros_SVG=Scalable Vector Graphics (*.svg) Ficheros_TFW=TIFF World File (*.tfw) Ficheros_TIF=(Geo)TIFF (*.tif, *.tiff) Ficheros_TREE=Decision Tree (*.tree) Ficheros_TXT=Text (*.txt) Ficheros_WLD=World File (*.wld) Ficheros_XLS=Excel Spreadsheet (*.xls) Ficheros_XML=Extensible Markup Language (*.xml) Ficheros_csv=Comma Separated Values (*.csv) Ficheros_dbf=DBase File (*.dbf) Ficheros_de_cartografia=Shapefile/CAD Drawing (*.shp, *.dxf, *.dwg) FieldDecimalCount= FieldDefaultValue= FieldLength= FieldName= FieldType= Field_already_exists__=Field exists already\: Field_prefix_=Field prefix\: Field_to_use_for_JOIN_=Field to join on\: Field_with_From_ID=Field with FROM ID Field_with_To_ID=Field with TO ID Field_with_turn_cost= Fields=Fields File= File_Format=Output file File_exists_Do_you_want_to_overwrite_it=File exists. Do you want to overwrite it? File_exists_Do_you_want_to_overwrite_it?= Finished_the_derivative_geometries_tool_in_layers=Derivative geometries tool has finished processing the layers. First_point_coordinates= Fix_parameters=Fix parameters Fixed_position_counting_from_bottom=Fixed position counting from bottom Fixed_position_counting_from_top=Fixed position counting from top Flat=Planar Flatness=Flatness Flip_Lines=Flip lines Flip_lines=Invert order of line nodes Font=Font Format_selection= Formato= Formato_de_numero_erroneo=Incorrect number format. Fuente= Fuera=External FullScreen= Funciones_Sumarizacion=Grouping functions GAPS=Gaps GC=Computational geometry GC_Desc=Geoprocessing tools that solve computational geometry tasks. GEOMETRY_INFO=Feature geometry information GEOS=GEOS GEO_position=Geographic location GL= GML=Geography Markup Language (GML)... GROUP=GROUP GT2_BOUNDING_TRIANGLE=Geotools 2 implementation of algorithm for incremental triangulation within bounding triangle. GT2shp= Gall_Stereographic=Gall Stereographic General=General GeneralLabeling.sample_text= GeneralLabeling.sample_text= Generalitation=Generalize Generalization=Generalization Generando_red_a_partir_de_capa_lineal=Generating network from line layer... Generando_topologia_de_poligonos= Generar_Intervalos= Generar_Red==Generate network topology Generate=Create Generate_Tfw_= Generate_line=Create line Generate_polygon=Create polygon Generated_File=Output file GeoDB= GeoProcessing= GeoProcessing\ Manager= Geom_AREA= Geom_LENGTH= GeometryPropertyType=Geometry Geometry_not_found_in_radius_search=No geometries found within search radius. Geometry_types=Geometry types Geometry_without_info=Geometry without information. Geoprocesos=Geoprocessing tools German_legal_metre=German legal meters Gestor_de_Geoprocesos=Geoprocessing tools... Gnomonic=Gnomonic Gold_Coast_foot=Gold Coast feet Goode=Goode Grados=Degrees Graficos=Graphics Grid=Grid Grid_settings=Grid settings Grosor_de_linea= GroupByField_not_initialized="Group by" field not initialized. Guardar=Save Guardar_el_zoom_actual=Save current zoom Guardar_leyenda=Save HTML_and_text_formats=Link to text and HTML files Habilitar_etiquetado=Enable labeling Hammer_Aitoff=Hammer Aitoff HanegadasC=Hanegadas (Castilla) HanegadasV=Hanegadas (Valencia) HeadMounted= Hectareas=Hectares Height=Height Heigth_Z= Heigth_layer_question= Herramienta_georeferenciacion=Georeferencing tool Herramientas=Tools Herramientas_Mapa=Layout tools Herramientas_SEXTANTE=SEXTANTE GIS processing tools Herramientas_Tabla=Table tools Herramientas_de_analisis=Processing tools Herramientas_localizador=Additional data view navigation tools Herramientas_vista= Hight= Hiperenlace=Hyperlink Historial=Command line history HorizontalInterlace= HorizontalSplit= Hotine_Oblique_Mercator_Two_Point_Center= Hyperlink=Hyperlink Hyperlink_Settings=Hyperlink settings Hyperlink__field_value_is_not_valid_file= Hyperlink_linked_field_doesnot_exist= Hyperlink_settings=Hyperlink settings I18nPreferencePage.Activar=Activate I18nPreferencePage.Desinstalar=Uninstall... I18nPreferencePage.Desinstalar_idioma_tooltip=Uninstall an interface language. I18nPreferencePage.Idioma=Interface language I18nPreferencePage.Instalar=Install... I18nPreferencePage.Instalar_idioma_tooltip=Install a new language or update an existing one. I18nPreferencePage.Locale_code=Language code I18nPreferencePage.Pais=Country I18nPreferencePage.Variante=Variant I18nPreferencePage.al_archivo=to file\: I18nPreferencePage.archivos_jar=ZIP/JAR Archive (*.zip, *.jar) I18nPreferencePage.ayuda=The application has to be restarted before any language changes will take effect. I18nPreferencePage.colaboracion=If you would like to help with the translation of gvSIG, then get in contact with us via email\: translations@gvsig.org. I18nPreferencePage.confirmar_desinstalar_idioma=Confirm uninstallation of interface language I18nPreferencePage.en_archivo=in file\: I18nPreferencePage.error_actualizar_idioma=Error updating language support I18nPreferencePage.error_desinstalar_idioma=Error uninstalling language support I18nPreferencePage.error_instalar_idiomas=Error installing language support I18nPreferencePage.exportado_textos_idioma=Text has been exported to\: I18nPreferencePage.exportar_actualizar=Export... I18nPreferencePage.exportar_actualizar_tooltip=Export the selected interface language's text to update it. I18nPreferencePage.exportar_idioma=Export a language's text I18nPreferencePage.exportar_traducir=Translate... I18nPreferencePage.exportar_traducir_tooltip=Export the selected language's text for translation to another language. I18nPreferencePage.idioma_actual_no_puede_desinstalar=The currently active interface language cannot be uninstalled. I18nPreferencePage.idioma_preparado_traducir=Exported for translation\: I18nPreferencePage.idiomas_instalados=Language files received. \nRestart application to activate\: I18nPreferencePage.idiomas_no_encontrados_para_instalar=Unable to find a language to install or update.
Check that the imported ZIP file contains a "locales.csv" file and, at least,
a ".properties" file with the text for the language to import. I18nPreferencePage.instalar_idiomas=Install languages I18nPreferencePage.seguro_desea_desinstalar_idioma=Are you sure you want to delete the selected languages\: I18nPreferencePage.seleccione_idioma=Select a language to update I18nPreferencePage.seleccione_idioma_actualizar=Select a language to update I18nPreferencePage.seleccione_idioma_desinstalar=Select a language to uninstall I18nPreferencePage.seleccione_idioma_referencia=Select a language to use for reference\: I18nPreferencePage.seleccione_idioma_traducir=Select the language to translate to IAU2000=IAU2000 ID=ID INCORRECT_VERROR_LINKS=Invalid error vectors layer. INFO=Info Icon_not_found_=Icon not found Identificar_Resultados=Query results Igual_que_la_impresora=Same as printer Image=Image Image_format=Link to image files Imagen= Implimir=Print... Importar= Importar_Objeto_3D= Importar_Objeto_3D_Vectorial= Impossible_convert_to_polygon=Cannot convert to polygon. Impossible_convert_to_polygon_the_geometry=Cannot convert geometry to polygon. Impossible_convert_to_polyline=Cannot convert to polyline. Imprimir=Print... Incompatible_data_type_in_column_wont_modify_that_column=Incompatible data types. Column will not be modified. Incompatible_projection=Incompatible projection. Increm_distancia_fusion= Incremental_DT_based_in_a_rectangular_bounding_box=Incremental TIN based on bounding triangle. Indexando=Indexing... Indexando_espacialmente=Generating spatial index for layer... Indian_foot=Indian feet Indian_foot_(1937)=Indian feet (1937) Indian_foot_(1962)=Indian feet (1962) Indian_foot_(1975)=Indian feet (1975) Indian_yard=Indian yards Indian_yard_(1937)=Indian yards (1937) Indian_yard_(1962)=Indian yards (1962) Indian_yard_(1975)=Indian yards (1975) Inferior=Lower Informacion=Information Information=Information Inicializando=Initializing... Initializing_configuration_quick_info_tool=Initializing setup for Quick Info tool... Insertar=Insert Inside=Inside Interleave_= InternalPolygonCADTool.end=E Interseccion=Intersection Interseccion._Introduccion_de_datos=Data input for intersection\: Intersecten_con=intersect with Intervalo=Interval width\: Intervalos=Intervals Intervalos_equidistantes= Intervalos_por_rupturas_naturales= Introduccion_de_datos=Data entry Introducir_valores_desplazamiento=Offset values\: Introductory_text_1=This wizard will help you create a new topoloy. Introductory_text_2=A topology is a model of relative spatial relations between features in one or more layers. It includes relations such as "touches", "overlaps"; "contains", etc. Topology is of critical importance for error checking and quality control. Introductory_text_3=For example, boundaries of residential plots may not overlap each other and must be closed. Invalid_width=Invalid width. Italic=Italic Izquierda=Left Izquierdo=Left JTSVALID=All geometries of A must pass JTS validation JoinCADTool.end=E Join_parameters_are_incomplete=Join parameters are incomplete. Juntar=Merge Juntar._Introduccion_de_datos=Data input for merge KML=Keyhole Markup Language (KML)... KeyMapping=Key mapping KeyMapping=Key mapping KeyMapping.Caracter_no_valido=Invalid character Kilometros=Kilometers Krovak=Krovak LAGRANGE_CURVE=Lagrange curve LARGERTHANCLUSTERTOL=All geometries must be larger than the cluster tolerance LAYER=Layer LINE=LINE LINEMUSTNOTHAVEDANGLES=All line geometries of A must be free of dangling nodes LINEMUSTNOTHAVEPSEUDONODES=No line geometry of A may contain any pseudo nodes LINENOTSELFINTERSECT=No line of A may self-intersect LINKS_SPATIAL_ADJUST=Error vectors LYRMUSTBECONTAINED=All geometries of A must be contained in geometries of B LYRMUSTBECOVERED=All geometries of A must be covered by geometries of B LYRMUSTBECOVEREDBYLAYER=Each geometry ofA must be covered by one or more of B LYRMUSTBEEQUAL=Each geometry of A must match an identical geometry of B LYRMUSTCONTAINS=Each geometry of A must contain at least one geometry of B LYRMUSTCOVERS=Each geometry of A must cover at least one geometry of B LYRMUSTCROSSWITH=Each geometry of A must cross at least one geometry of B LYRMUSTDISJOINTS=All geometries of A must be disjoint from all geometries of B LYRMUSTNOTHAVEDUPLICATES=Layer A must not contain any duplicate geometries LYRMUSTTOUCH=Each geometry of A must touch at least one geometry of B Label_Duration= Label_Mode= Label_properties=Label properties Laborde_Madagascar=Laborde Madagascar LadoVentana=Window size Lambert_Azimuthal_Equal_Area=Lambert Azimuthal Equal Area Lambert_Conformal_Conic=Lambert Conformal Conic Lambert_Conformal_Conic_1SP=Lambert Conformal Conic 1SP Lambert_Conformal_Conic_2SP=Lambert Conformal Conic 2SP Lambert_Conformal_Conic_2SP_Belgium=Lambert Conformal Conic 2SP Belgium Lambert_Conic_Near_Conformal=Lambert Conic Near Conformal Las_traducciones_no_pudieron_ser_cargadas=Translations could not be loaded. Latitude= Latitude_Of_1st_Point=Latitude of first point Latitude_Of_2nd_Point=Latitude of second point Launcher.Dependencia_no_resuelta_en_plugin=Unsatisfied plugin dependency Launcher.Dos_skin_extension=Two skin extensions. Using the last one. Launcher.Error_con_las_librerias_del_plugin=Plugin library error Launcher.Error_instanciando_la_extension=Cannot instantiate extension Launcher.Error_localizando_la_clase_de_la_extension=Cannot locate extension class Launcher.Hay_dependencias_circulares=Circular plugin dependencies encountered Launcher.Ignorando_el_directorio=Ignoring the directory Launcher.No_se_encontro_la_clase_de_la_extension=Cannot find extension class Launcher.No_se_encontro_la_clase_mdi_manager=Cannot find MDI manager class Launcher.No_se_pudo_acceder_a_la_clase_mdi_manager=Cannot access MDI manager Launcher.No_se_pudo_guardar_la_configuracion_de_andami=Cannot save Andami configuration Launcher.No_se_pudo_instanciar_la_clase_mdi_manager=Cannot instantiate MDI manager Launcher.No_se_puede_acceder_a=Cannot access Launcher.Se_produjo_un_error_guardando_la_configuracion_de_los_plugins=Cannot save plugins configuration Launcher.Two_extensions_with_the_same_priority=Found two extensions with the same priority. Will only load one. Launcher.Two_menus_with_the_same_position=Found two menus with the same position. Will only load one. Launcher.config_mal_formado=. Malformed 'config.xml' file Launcher.config_no_encontrado='config.xml' file not found Launcher.error_getting_class_loader_for_status_bar_control=Error getting class loader for status bar Launcher.labelset_class=Cannot find label set class (labelset) Launcher.look_and_feel=Cannot set system 'look and feel' Launcher.menu_without_position=Menu without assigned position Layer=Layer\: Layer3D= LayerName=Layer name Layer_=Capa\: Layer_1=Source layer Layer_2=Target layer Layer_Destinations=Destinations layer Layer_Origins=Origins layer Layer_Properties= Layer_Refresh= Layer_added_to_TOC=Added layer to view. Layer_created_successfully=Layer created successfully. Layer_from_active_view=Layer from active view Layer_loading_order=Layer loading order Layer_options= Layer_with_buffers_created= Layer_with_buffers_reprojected= Layer_with_influence_areas_created=Created layer with areas of influence. Layer_with_influence_areas_reprojected=Created layer with reprojected areas of influence. Layer_with_unsupported_geometries_type=Layer geometry type not supported. Layers=Layers Layers_fields_loaded_successfully=Layer attribute fields successfully loaded. Layout_Tools_Graphics=Layout object modifiers Layout_Tools_Insert_Cartografy=Layout cartographic objects Layout_Tools_Insert_Simple=Layout drawing tools Layout_Tools_View=Layout embedded data view navigation Layout_Tools_Zooms=Layout navigation (zoom and pan) LeftEye= Length=Length Leyenda=Legend Leyenda_Por_Defecto=Default legend Limpiando_lineas=Cleaning lines Limpiar_antes_geometrias=Clean geometries first Limpiar_topologicamente_la_capa_de_entrada=Clean topology of input layer Line=Line LineClean=Clean LineClean._Progress_Message= LineOrPolygonToPoints=Reduce to points LineToPoints_layer_message=Converting lines to points... Linea= Linea_comandos=Command line Lines=Lines Link=Link... Link_layer_Selection=Select error vectors layer Load_Network=Create network... Load_Network_From_File=Load from file... Load_Raster_Layer=Load raster layer Load_Red=Load file of previously calculated topology Load_Topology=Load topology Load_TurnCosts=Add turn costs... Load_Vector_Layer=Load vector layer Load_links=Load... Load_successful=Successfully loaded. Loads_raster_layers_in_gvSIG=Loads raster layers into active view Loads_vector_layers_in_gvSIG=Loads vector layers into active view Localizador=Locator Localizador_por_atributo=Locate by attribute... Longitude= Longitude_Of_1st_Point=Longitude of first point Longitude_Of_2nd_Point=Longitude of second point Los_cambios_efectuados_sobre_estos_valores_se_aplicaran_al_reiniciar_la_aplicacion=The application has to be restarted for changes to take effect. Loximuthal=Loximuthal MARK_AS_EXCEPTION=Mark as excluded MAX=MAX MDIFrame.Error_no_capturado_por_el_usuario=Unexpected error encountered MDIFrame.quiere_salir=Do you want to quit the application? MDIFrame.salir=Exit MDIManagerFactory.No_skin_extension_in_the_plugins=No "skin" extension among registered plugins MEAN=MEAN MERGE_OVERLAP_AREA_FIX=Merge overlap area with one of the geometries MERGE_OVERLAP_AREA_WITH_FIX=Merge overlap area with one of the geometries MIN=MIN MOSTRAR=Show\: MULTI=MULTI MULTIGEOMETRY=Multigeometry MULTIPOINT=MULTIPOINT MUSTNOTHAVEREPEATED=No geometry of A may have duplicate coordinates Manage_Flags=Manage route... Mapa=Map Mapped_Position=Mapped position Mas_100= MaxFeaturesEditionCache=Maximum number of features to keep in memory. Max_lenght_dangle_nodes=Max. length dangling nodes Max_number_Errors_not_numeric=Please provide a numeric value for the maximum number of errors. Maximo=Maximum McBryde_Thomas_Flat_Polar_Quartic=McBryde Thomas Flat Polar Quartic Media=Average Mensaje_buffer=Computing buffer zones... Mensaje_clip=Clipping tool... Mensaje_convexhull=Convex hull tool... Mensaje_difference=Difference tool... Mensaje_dissolve=Dissolve tool.... Mensaje_enlace_espacial=Spatial join tool... Mensaje_interseccion=Intersection tool... Mensaje_juntar=Merge tool... Mensaje_primera_pasada_union=Computing intersections... Mensaje_procesando_buffer=Generating buffers... Mensaje_procesando_buffer2=Dissolving buffers... Mensaje_procesando_clip_primero=Computing clipping polygon... Mensaje_procesando_clip_segundo=Clipping geometries... Mensaje_procesando_convexhull=Computing convex hull... Mensaje_procesando_diferencia=Computing differences... Mensaje_procesando_dissolves=Dissolving geometries... Mensaje_procesando_enlace_espacial=Joining features... Mensaje_procesando_interseccion=Computing intersections... Mensaje_procesando_juntar=Merging geometries... Mensaje_procesando_split= Mensaje_segunda_pasada_union=Computing A-B differences... Mensaje_split= Mensaje_tercera_pasada_union=Computing B-A differences... Mensaje_union=Union tool... Menu_type_not_supported_= Mercator=Mercator Mercator_1SP=Mercator 2SP Mercator_2SP=Mercator 2SP Message_apply_crack_process=Snapping tolerance is non-zero. Apply snapping to geometries now? Message_cluster_tol_not_numeric=Please provide a numeric value for the cluster tolerance setting. Message_crack_title=Confirm crack and snap tool. Message_error_creating_topology=Error creating topology. Message_error_delete_cluster_rule=Every layer that is part of a topology must have a cluster tolerance setting. Message_error_in_data_input=Invalid input data. Message_error_loading_topology=Error loading topology. Message_error_select_rule=Please select a rule. Message_layer_already_in_topology=Layer already part of topology. Message_max_number_of_errors=Please provide a valid maximum error number. Message_no_layers_selected=Please select at least one layer to create a new topology. Message_not_selected_topology_file=Please select a topology file. Message_rule_already_in_topology=Such a rule is already part of the topology. Message_rule_definition=Invalid rule definition. Message_rule_not_allowed=Rule cannot be added to topology. Please revise your settings. Message_topology_layers=Topology must include at least one layer. Message_topology_name_cluster=Please provide a name and cluster tolerance setting for the topology. Messages._no_se_encontro_la_traduccion_para=Cannot find translation for Messages.no_se_encontro_la_traduccion_para=Cannot find translation for Metodo_Douglas_Peucker=Douglas-Peucker method Metodo_topology_preserving=Preserve topology Metros=Meters Milimetros=Millimeters Millas=Miles Millas_Nauticas=Nautical miles Miller_Cylindrical=Miller Cylindrical Minimo=Minimum Minimum_spanning_tree=Minimum spanning tree... Modelizador=Process flow modeler Modified_project_=Modified project\: Modo_de_Proyeccion= Modo_ventana= Mollweide=Mollweide Monitor= More_control_points_needed_for_the_current_transform=Selected type of transformation requires additional control points. Mostrar_Contorno= Mostrar_siempre=Always show Move_from_view= Mover_geo=Move georeferenced image Muestra_atributos=Show attribute table of active layer Muestra_los_atributos_de_las_capas_seleccionadas= Muestra_los_elementos_de_la_capa_usando_una_gama_de_colores_en_funcion_del_valor_de_un_determinado_campo_de_atributos=Stretch a color ramp over the values of a field Muestra_todos_los_elementos_de_una_capa_usando_el_mismo_simbolo=Draw all features using the same symbol. Muestra_todos_s_elementos_de_una_capa_usando_el_mismo_simbolo=Draw all features using the same symbol MultiLineStringPropertyType=Multiline MultiPoint=Multipoint MultiPointPropertyType=Multipoint MultiPolygonPropertyType=Multipolygon Multi_layer_selection_applied_for_influence_area=Multilayer selection applied to buffer zones. MultipointCADTool.end=E Multipoints=Multipoints Must_select_a_rule_to_correct=Please select a rule for which to fix errors (not "All rules"). NADGR= NATURAL_CUBIC_SPLINE=Natural cubic spline NO=No NOT_FOUND_GEOMETRIES=No features found. NOT_VALIDATED_STATUS=Not yet validated. NURB_SPLINE=Non-uniform rational B-spline (NURBS) N_points=Number of points Name=Name Name_of_the_new_layer=Name of new layer Near_Sided_Perspective=Near-sided perspective Network=Network New= New_Zealand_Map_Grid=New Zealand Map Grid New_features=New features New_field=New field... New_field_name_proposed__=Proposed new field name\: New_turncost= Next= Nivel_de_detalle= Nivel_de_extrusion= Nivel_de_extrusi\u00c3\u00b3n= Nivel_de_extrusi\u00f3n= Nivel_de_transparencia=Transparency level No=No No.hay.lista.de.idiomas.preferidos.quiza.olvido.inicializar.clase= No_Shape= No_available= No_de_intervalos=Number of intervals\: No_extension_associated_with_this_event_=No extension associated with this event. No_ha_sido_posible_realizar_la_operacion=Unable to perform operation. No_hay_lista_de_idiomas_preferidos_quiza_olvido_inicializar_clase=There is no preferred languages list. Maybe the 'Messages' class was not initiated. No_mostrar=Do not show this layer if the view scale No_mostrar_la_capa_cuando_la_escala=Do not show this layer if the view scale No_reconocido= No_se_encontro_la_extension_especificada_en_el_parametro_exclusiveUI=The extension specified by the 'exclusiveUI' parameter was not found\: No_se_encontro_la_traduccion_para=Cannot find translation for No_se_pudo_obtener_la_tabla_de_la_capa=Could not retrieve attribute table for layer No_usar_buffer_redondeado=Do not round edges No_vector_layer_can_be_save_changes=Due to missing write support, changes cannot be saved for any vector layer in the view. Nombre=Name Nombre_que_se_le_dara_al_zoom=Name for the zoom Nombres= None= Normal_direction= Normalizating=Normalizing ... North= North_plane= Not_possible_generate_unique_field_name=Failed to generate a unique field name. Nueva_tabla=New table Nuevo_conjunto=New selection Num_intervalos=Intervals right of "0"\: Number_of_geometries_created_successfully=Number of geometries read successfully Number_of_geometries_that_couldnt_be_created=Number of geometries that could not be created Number_of_geometries_to_create=Number of geometries to create Number_of_lines=Number of lines Number_of_points=Number of points Number_of_polygons=Number of polygons Numero_anillos_concentricos=Number of concentric buffer zones\: Numero_de_elementos_seleccionados=Number of selected features Numero_de_segmentos_por_cuadrante= N\u00fam_intervalos= ODMatrix=Origin-destination matrix... OK=Ok Objeto_3D= Objeto_3D_GIS= Objeto_3D_GIS_Vectorial= Oblique_Mercator=Oblique Mercator Oblique_Stereographic=Oblique Stereographic Obtener_mas_proximo=Transfer from nearest feature Offset= Ok=Ok On_the_top=On the top Ongoing_process_please_wait=Computation in progress. Please be patient... Only_one_elevation_messg= Only_one_elevation_title= Opaco= Opciones= Opciones_de_elevaci\u00c3\u00b3n= Opciones_de_elevaci\u00f3n= Opciones_de_imagen= Opciones_de_objeto= Open= Operacion_de_overlay=Overlay operations Operaciones_adicionales= Operation_not_initialized=Operation has not been initialized. Optional_layers_fields_loaded_successfully=Optional layer fields successfully loaded. Options=Options Order=Order Origen_de_Datos=Datasource\: Origen_de_datos=Datasource Origin_point= Orthographic=Orthographic Other_Layers_=Other layers\: Otros=Others Output_layer=Output layer Outside=Outside Outside_and_inside=Outside and inside Over_Raster_Layers=Above raster layers Over_Vector_Layers=Above vector layers Overlay=Overlay Overlay_Desc=Geoprocessing tools that extract new information by overlaying two layers. Owner=Owner\: PAN_TO=Pan to feature PDF_format=Link to PDF files PERIMETER=Perimeter POINT=POINT POINTSMUSTNOTOVERLAP=No point of A may coincide with another point of A POLYGON=POLYGON POLYGONMUSTNOTOVERLAP=No polygon of A may overlap another polygon of A POLYGONMUSTNOTOVERLAPWITH=No polygon of A may overlap a polygon of B POLYGONMUSTNOTSELFINTERSECT=No polygon of A may contain a self-intersection POLYGONSMUSTNOTHAVEGAPS=There must not be any gaps between polygons of A PROJECTIVE_TRANSFORM=Projective transformation Pagina= Pan_Navigation= Parameters= Parametros= Parametros_De_Entrada_Para_La_Correccion=Input data for correction Path=Path Path_where_create_the_new_layer_files=Directory in which to save new layer files Pegado_sobre_el_terreno= Percent=Percent Percent_of_load=Percent loaded Perimeter=Perimeter Perimetro= Permite_etiquetar_los_elementos_del_mapa_con_el_valor_de_un_determinado_campo=Labels each feature with the value of a selected attribute table field Personalizado=Custom Photometric_= Pies=Feet Pixel_Point=Pixel location Plain=Regular Plane_coordinates=Planar coordinates Please_enter_a_valid_number= Please_enter_max_cost_MST=Maximum cost for calculating Minimum Spanning Tree Please_select_a_valid_file= PluginClassLoader.Dos_clases_con_el_mismo_nombre_en_el_plugin=Two classes with the same name PluginClassLoader.Error_reading_file=Error reading file\: PluginServices.Bug= PluginServices.Bug\ en\ el\ c\u00f3digo=General application error. PluginServices.Bug_en_el_codigo=Bug in program code. PluginServices.Error= PluginServices.Error\ grave\ de\ la\ aplicaci\u00c3\u00b3n.\ \ \n\ Es\ conveniente\ que\ salgas\ de\ la\ aplicaci\u00c3\u00b3n= PluginServices.Error\ grave\ de\ la\ aplicaci\u00c3\u00b3n.\n\ Es\ conveniente\ que\ salgas\ de\ la\ aplicaci\u00c3\u00b3n= PluginServices.Error\ grave\ de\ la\ aplicaci\u00f3n.\ Es\ conveniente\ que\ salgas\ de\ la\ aplicaci\u00f3n=Fatal error encountered. It is highly advisable to quit the application. PluginServices.Error\ grave\ de\ la\ aplicaci\u00f3n.\ \ \n\ Es\ conveniente\ que\ salgas\ de\ la\ aplicaci\u00f3n= PluginServices.Error\ grave\ de\ la\ aplicaci\u00f3n.\n\ Es\ conveniente\ que\ salgas\ de\ la\ aplicaci\u00f3n= PluginServices.Error_grave_de_la_aplicacion= PluginServices.Error_grave_de_la_aplicaci\u00f3n=Fatal error in application. PluginServices.No_se_encontro_el_recurso_de_traducciones= PluginServices.No_se_encontro_la_traduccion_para= PluginServices.No_se_pudo_poner_el_reloj_de_arena=Cannot set hour glass. PluginServices.No_se_pudo_restaurar_el_cursor_del_raton=Cannot restore cursor. PluginServices.Procesando=Processing... Point=Point PointPropertyType=Point Point\ Shape\ Files= Points=Points PointsToLineOrPolygon=Points to line or polygon Points_to_line=Points to line Points_to_polygon=Points to polygon Polar_Stereographic=Polar Stereographic Poly_To_Lines=Reduce to lines Polyconic=Polyconic Polygon=Polygon PolygonBuild._Progress_Message=Building polygon topology... PolygonCADTool.circumscribed=C PolygonCADTool.into_circle=I PolygonPropertyType= PolygonToLines=Convert polygons to lines Polygons=Polygons PolylineCADTool.arc=A PolylineCADTool.close_polyline=C PolylineCADTool.end=E PolylineCADTool.line=L Por_favor_active_el_tema= Por_favor_active_la_capa=Please activate the layer Posicion_origen= PowerWall= Preferences=Preferences... Preferencias=Preferences... Preparar_pagina=Page setup Previsualizacion=Preview Previsualizacion_de_simbolo=Symbol preview Print= Procesando_linea=Building network\: Process_canceled=Process canceled. Process_canceled_=Process canceled. Process_cancelled=Process canceled. Process_failed=Process failed. Process_finished=Process finished. Process_finished_successfully=Process finished successfully. Process_finished_wont_be_cancelled=Process has already finished. Will not be canceled. Process_type=Mode of operation\: Progressive_= Propiedades_3D= Propiedades_de_la_Capa= Propiedades_del_Tema= Propiedades_escala_grafica=Scale bar properties Propiedades_texto=Text properties Proximidad=Proximity Proximidad_Desc=Geoprocessesing tools for proximity and distance analysis. Proyeccion_Actual=Source projection Proyeccion_Destino=Target projection\: Proyecciones=Projections Proyection_Select=Type\: Pulgadas=Inches QuadBuffer= Quartic_Authalic=Quartic Authalic Quick_Print=Quick print-out... Quitar=Remove Quitar_Todos= Quitar_capa=Remove layer Quitar_todos=Remove all REMOVE_OVERSHOOT_FIX=Delete overshoot REMOVE_PSEUDONODE_FIX=Delete pseudo node REMOVE_REPEATED_COORDS_FIX=Delete duplicate coordinates RGB= RMS=RMS RUBBER_SHEET_TIN_LAYER=Triangulation of control points RUBBER_SHEET_TRANSFORM=Rubber-sheet transformation R_format= Radius= Rango_de_escalas=Scale range Rango_maximo= Rango_minimo= Raster= Raster_Layers_=Raster layers\: Raster_layer= Rasterfiles= Rasterize_layer_question= RealityCenter= Recortar=Clip Recortar._Introduccion_de_datos=Data input for clip RectangleCADTool.square=S Recuperar_leyenda=Load... Recuperar_y_eliminar_otros_zoom=Restore and delete other zooms Recursos= Recursos\ Disponibles=Available resources Refresh_automaticaly= Reload=Reload Remove=Remove RemoveEnds=Remove ends Remove_All=Delete all Remove_Lyr=Delete layer Remove_Lyr_WARNING1=This layer is part of the following rules\: Remove_Lyr_WARNING2=Continue and discard all associated topological information, including errors? Remove_Rule=Delete Remove_action=Remove action Removed_layer_with_influence_areas_to_TOC=Removed layer with buffer zones from TOC. Reproyeccion._Introduccion_de_datos=Data input for reprojection\: Reproyectar=Reproject Reset_View= Resolucion= Resource_was_not_saved=Resource was not saved Resultados=Display results Return_to_current_project=Return to current project Reverse_direction= RightEye= Robinson=Robinson Rotation= Rotation_degreesX= Rotation_degreesY= Rotation_degreesZ= Round=Rounded Route_report= Rule=Rule Rule_type=Rule Rules=Rules Rules_not_registered=No rules registered. Runtime_exception_refreshing_the_main_frame_by_a_Swing_thread=Program exception (fatal error) encountered while calling Java Swing thread to refresh main user interface frame. Ruta_borrada_o_inexistente=Route deleted or not yet computed. Ruta_manual= Ruta_no_encontrada=Route not found. SELECCIONAR_CURVA=Smoothing settings SI=Yes SIMILAR_TRANSFORM=Similarity transformation SLD_grammar=SLD grammar SPATIAL_ADJUST=Spatial adjustment of vector layer SPATIAL_ADJUST_SESSION=Spatial adjustment session SPLIT_GEOMETRY_TOOL_NAME=Split geometry SPLIT_SELFINTERSECTING_FIX=Split self-intersecting line SPLIT_SELFINTERSECTING_POLYGON_FIX=Split self-intersecting polygon SQL_query=SQL query STDEV=STDEV SUBSTRACT_OVERLAP_AREA_FIX=Delete overlap area from both polygons SUBSTRACT_OVERLAP_AREA_WITH_FIX=Delete overlap area from both polygons SUM=SUM SVG_format=Link to SVG files Salir=Exit Sample=Sample Save_Topology=Save topology Save_TurnCosts=Save turn costs... Save_the_selected_resources_and_close_current_project=Save selected resources and close current project ScaleCADTool.factor=F ScaleCADTool.reference=R Scripting=Scripting Se_han_encontrado_capas_erroneas_en=Found some faulty layers in Se_superponen_a=are on top of Se_va_a_tener_en_cuenta_para_borrar_los_registros_desde= Sean_disjuntos_a=are disjoint from Sean_iguales_a=are the same as Second_point_coordinates= Seleccion_por_capa=Spatial selection... Seleccion_por_tema= Seleccionar=Select... Seleccionar_Directorio=Choose directory... Seleccionar_capa_con_puntos_de_parada=Convert point layer to stops Seleccionar_de_las_capas_activas_los_elementos_que=Select features from active layers that Seleccionar_del_conjunto=Subtract from selection Seleccionar_fichero=Select file Seleccione_un_formato_para_guardar_la_ruta=Choose format for saving most recent route Seleccione_un_formato_para_guardar_los_flags=Choose format for saving stops\: Seleccione_una_capa_de_puntos_para_crear_paradas=Choose point layer to convert to stops. Select_Color= Select_all=Select all Select_layer=Select layer Select_layers_and_process=Select layers and options Select_link_layer=Select layer with error vectors\: Select_resources_to_save_before_closing_current_project=Resources to save before closing current project\: Select_the_annotation_layer_to_store_the_labels_=Select the annotation layer that stores the labels Select_the_path=Select path Selected=Selected layer Selection_by_buffer_process=Buffer zone selection tool Selection_process_finished_succesfully=Selection process finished successfully. Selection_restored=Selection restored. Service_Area=Service area... Servidor=Server Set_labeling_expression=Define labeling expression Set_target_layer=Set target layer Shalom= Shape_Type=Geometry type Shape_file=Shapefile Shapefile=Shapefile Shapefiles= Shortest_Path=Shortest path Show= Show\ Errors=Show errors Show_grid=Show grid Show_in_map= Shows_HTML_or_text_files_in_gvSIG=Use internal viewer for HTML and text files Shows_HTML_or_text_files_inside_gvSIG=Use internal viewer for HTML and text files Shows_PDF_files_in_gvSIG=Use internal viewer for PDF files Shows_SVG_files_in_gvSIG=Use internal viewer for SVG files Shows_image_files_in_gvSIG=Use internal viewer for image files Side=Side Siguiente=Next Simbolo=Symbol Simbolo_Unico= Simbolo_unico=Single symbol Simbologia=Symbology Sincronizar_camaras= SingleLabelingTool=Individual labeling tool Single_labeling=Individual labeling Sinusoidal=Sinusoidal SistCoor_Geografico2D=Geographic 2D SistCoor_Parametro=Parameter SistCoor_Proyactado=Projected SistCoor_Proyeccion=Projection SistCoor_Unidades=Units SistCoor_Valor=Value SistCoor_cbToolTip=Select an option SistCoor_titmarco=Coordinate system Size=Size SmartOrderManager=Smart order Smooth_Geometry=Smooth Smooth_Lines=Smooth lines Snapping= Sobreescribir_fichero=Overwrite file Sobreescribir_fichero_Pregunta_1=The selected file already exists. Sobreescribir_fichero_Pregunta_2=Do you want to overwrite? Solo_disolver_adyacentes=Dissolve adjacent features only Solo_para_capas_vectoriales=Only for vector layers Source_layer=Source layer Source_table_=Name\: Source_table_options=Join new fields to table\: Source_x=x0 Source_y=y0 South= Spatial_Adjust=Transform Spherical=Spherical SplashWindow.Iniciando=Initializing... SplashWindow.configuring_proxy=Configuring proxy... SplashWindow.initializing_extensions=Initializing extensions... SplashWindow.installing_extensions_controls=Installing extension controls... SplashWindow.installing_extensions_labels=Installing extension labels... SplashWindow.installing_extensions_menu=Installing extensions menu... SplashWindow.installing_extensions_menus= SplashWindow.loading_plugin_settings=Loading plugin settings... SplashWindow.looking_for_a_skin=Checking for GUI skin... SplashWindow.looking_for_updates=Looking for updates... SplashWindow.post_initializing_extensions=Post-initializing extensions... SplashWindow.preparing_workbench=Preparing workbench... SplashWindow.reading_plugins_config.xml=Reading plugins XML config file... SplashWindow.setting_up_applications_name_and_icons=Setting up application name and icons... SplashWindow.setting_up_class_loaders=Setting up class loaders... SplashWindow.setting_up_master_extension=Setting up master extension... SplashWindow.starting_plugin_internationalization_system=Starting internationalization system... SplineCADTool.close=C SplineCADTool.end=E Spline_= SplitGeometryCADTool.end=E SplitLines._Introduccion_de_datos= Start_from= Starting_selection_of_layer=Initializing layer selection... Starting_selection_process=Initializing selection process... Starting_the_layer_in_edition_mode=Starting layer editing.. Statistics__Error_accessing_the_data=Statistics\: Data access error. Statistics__Selected_field_is_not_numeric=Statistics\: Selected field is not numeric. StatusBar.Aplicacion_iniciada=Application started. Statute_mile=Statute miles Stereographic=Stereographic Stereographic_North_Pole=Stereographic North Pole Stereographic_South_Pole=Stereographic South Pole Stopping_the_layer_of_edition_mode=Finishing edits for layer... Style=Style Subir_capa=Move layer up Sum=Summatory SummarizeForm_columna_average=Mean SummarizeForm_columna_id=Field SummarizeForm_columna_maximum=Maximum SummarizeForm_columna_minimum=Minimum SummarizeForm_columna_sd=Std. deviation SummarizeForm_columna_sum=Sum SummarizeForm_columna_variance=Variance SummarizeForm_fichero_destino=Please choose a target file before running operations. SummarizeForm_seleccionar_operaciones=Please choose operations to execute first. Summarize_Error_accessing_the_table=Summarize error\: Table access error. Summarize_Error_calculating_the_groups=Summarize error\: Error calculating groups. Summarize_Error_saving_the_output_DBF_file=Summarize error\: Error saving output to DBF file. Summarize_Field_does_not_exist=Summarize error\: Field does not exist Summarize_Group_by_field_does_not_exist=Summarize error\: "Group by" field does not exist. Summarize_Table_has_no_fields=Summarize error\: Selected table has no fields. Summary_of_the_new_shape_with_derivative_geometries_process=Summary of "new layer from derivative geometries" process Summary_of_the_process_of_adding_geometric_information=Summary of "add geometric information" process Summary_of_the_process_of_selecting_by_buffer=Summary of "selection by buffer zone" process Superior=Upper Swing_Compability=Java/Swing compatibility\: Swing_Compability_Note=Note\: Activating Java Swing compatibility will result in graphics performance loss. Swiss_Oblique_Cylindrical=Swiss Oblique Cylindrical Symbol=Symbol SymmetryCADTool.no=N SymmetryCADTool.yes=Y S\u00edmbolo=Symbol TEXT=TEXT TRANSFORMATION_ERROR=Error computing transformation Tabla=Table Tabla_de_Atributos=Attribute table Tabla_de_prueba= Tablas=Tables Table_Join=Join tables Table_with_turn_costs= TailTrim=Trimming tails (%) Target_annotation_layer=Target annotation layer Target_table_=Name\: Target_table_options=Import fields from table\: Target_x=x1 Target_y=y1 Tema= Terminar=Finish TextWindow@Caption= TextWindow@CloseButton= TextWindow@Message= TextWindow@Title= Text_Secs= The_following_resource_could_not_be_saved_=The following resource could not be saved\: The_process_cant_be_cancelled=Operation cannot be canceled. The_process_cant_be_paused=Operation cannot be paused. The_project_has_only_read_permissions=Project file opened with read-only permission. The_project_hasnt_read_permissions=You have no read permission for the project file. There_are_no_geometries_selected=There are no selected geometries. Tiempo= Tile=Tile Tipo= Tipo_de_intervalos= Tipo_de_leyenda= Tipo_de_linea= Tipo_no_reconocido=Unknown data type Tipo_pantalla= Tolerance= Tolerancia_fuzzy=Fuzzy tolerance Tool_unavaliable_with_view_in_geographic_projection=This tool is not available for views using geographic (lat/long) projection systems. Toolbars=Toolbars Tools_Select=Selection tools Tools_Select_Advanced=Advanced selection tools Topology=Topology TopologyPreferencesPage=Topology Topology_Desc=Tools for modification and repair of topological data properties. Topology_Test=Topology test Topology_properties=Topology properties Topology_properties_toc=Topology properties... Topology_rule=Topology rule\: Topology_rules=Topology rules\: Toquen=touch Total_length= Trabajar_con_las_coordenadas_originales=Use exact original coordinates Transform=Transformation\: Transparencia=Transparency Transparency= Transparente= Transverse_Mercator=Transverse Mercator Triangulation=Triangulation Triangulation_Test=Triangulation Triangulo= TurnTable=Add turn costs Type=Type ULX=Left X ULY=Left Y UNAVAILABLE_DESCRIPTION=No description available. UNKNOWN=UNKNOWN UPDATE=Update URL= USGS= USR=USR US_survey_chain=US survey chains US_survey_foot=US survey feet US_survey_link=US survey link US_survey_mile=US survey miles Umbral=Threshold Un_Layer= Unable_to_find_icon=Unable to find icon Uncheck_New_Field_Option_if_you_want_to_update_an_existing_field=Uncheck "New field" option if you want to update an existing field. Undefined_layer= Under_Raster_Layers=Below raster layers Under_Vector_Layers=Below vector layers Unidades=Units Union=Union Union._Introduccion_de_datos=Data input for union\: Unit=Unit Unknown=Unknown Unknown_layer_shape_type=Unknown layer geometry type. Unknown_summarize_error=Summarize error\: Unknown error. Unnamed=Unnamed Unnamed_new_gvsig_project_=Unnamed new gvSIG project UnzipFile@StatusText= Usar_indice_espacial=Use spatial index Usar_los_campos_de_la_capa=Use layer attribute fields Usar_solamente_los_elementos_seleccionados=Use selected features only Use= Use_max_cost=Use max. cost Use_max_distance=Use max. distance VALIDANDO_REGLA=Validating rule\: VALIDANDO_STATUS=Validating topology... VALIDANDO_TOPOLOGIA=Validating topology... VALIDATED_STATUS=Validated. VALIDATED_WITH_DIRTY_ZONES=Validated with dirty zones. VALIDATED_WITH_ERRORS=Validated with errors. VALIDATING_STATUS= VAR=VAR VERROR_TITLE=Error vectors VError_ID=Identifier VIEW_EXTENT=Current view only VIEW_RULE_DESCRIPTION=View rule description Validating_a_topology=Validating a topology... Valor=Value Valor_Bandas= Valor_azul=Blue value Valor_extrusionado= Valor_inicial= Valor_maximo_de_escala= Valor_minimo_de_escala= Valor_rojo=Red value Valor_verde=Green value Valores=Values Valores_Unicos= Valores_unicos=Unique values VanDerGrinten=Van der Grinten Vector_Layers_=Vector layers\: Ventana=Window Ver=Show VerticalInterlace= Vertical_Exageration=Vertical exaggeration\: View=View View_Point=View location View_Tools=Data view navigation (zoom and pan) View_Tools_Query=Feature query and measuring tools View_Tools_Zooms= Vista=View Vista3D= Vista_anadir_capa=Add layer tool Visualizacion=Visualization Visualizacion_estereo= Voronoi=Voronoi/Delaunay WCS_properties=WCS properties WFS=WFS WFSLayer=WFS layer WKT=WKT WMS= WMSLayer=WMS layer Warning=Warning Warning_Field_exists=Warning\: Field exists. Warning_Output_File=Warning\: Output file West= Width=Width Window= Window_Title= Window_properties_not_stored_correctly_Window_state_will_not_be_restored= Winkel_I=Winkel I Winkel_II=Winkel II Winkel_Tripel=Winkel Tripel Wire_Frame= Wont_select_geometries_on_the_layer_because_has_incompatible_projection=Incompatible projection. Failed to select geometries from layer. World_Point=World location Writable=Writeable X=X XYShift=XY shift (2D) XYShift._Introduccion_de_datos=Data input for XY shift XYShift._Progress_Message=Applying offset... X_coordinate=X-coordinate Y=Y YES=YES Y_coordinate=Y-coordinate Yardas=Yards Yes=Yes Z=Z ZOOM_TO=Zoom to feature Z_coordinate=Z-coordinate Zoom=Zoom Zoom_Acercar=Step-zoom in Zoom_Alejar=Step-zoom out Zoom_Completo=Zoom to all Zoom_Completo_Vista=Zoom to all Zoom_Mas=Zoom in Zoom_Mas_Vista=Zoom in Zoom_Menos=Zoom out Zoom_Menos_Vista=Zoom out Zoom_Navigation= Zoom_Previo=Previous zoom Zoom_Real=Zoom 1\:1 Zoom_Select=Zoom to selection Zoom_a_la_capa=Zoom to layer Zoom_al_Tema= Zoom_pixel=Zoom to 1\:1 resolution Zoom_previo=Previous zoom Zoom_sgte=Next zoom \= \= _(Etiquetas_estandar)= _(Intervalos)= _(Simbolo_unico)=(Unique symbol) _(Valores_unicos)= __catalan=Catalan __espacio_vertical= __lineas= __proyeccion_actual=Current projection\: __redimensionar_texto_escala=Resize text to fit view's scale __seleccion_de_fuente=Font selection __valenciano=Valencian a_default_symbol_will_be_used=A default symbol will be used. a_fichero=Save to file a_memoria=Temporary layer a_new_view=Create new view a_panel=a panel abajo=Below above=Above abrir=Open abrir...= abrir_archivo=Open file abrir_gestor_de_orig_db=Open database connections manager abrir_memoria=Temporary layer abrir_plantilla=Open template... abrir_proyecto=Open project... abrir_tooltip=Open an existing project abstract=Abstract accept=Ok accept_tip=Finish GCP placement and save georeferencing accessing_file_structure=File system access in progress accessing_to_the_layer=Layer data access in progress accumulated=Accumulated aceptar=Ok acerca_de=About gvSIG... activa_la_ventana=Activate window activar=Activate activar_regla=Activate ruler activar_tablas_color=Activate color table activar_uso_nodata=Activate "no data" usage active_limits= activo=Active activos=Active acumulado= add=Add add-point=Add point addBufferLayers_checkbox_TOOLTIP_HTML_explanation= addChild=Add child node addInfluenceAreasLayers_checkbox_TOOLTIP_HTML_explanation=Add buffer zones for each active layer
as new vector layers addLayer=Add layer... add_again_question=Add again? add_all=Add all add_all_button_TOOLTIP_HTML_explanation=Add all add_buffer_layers=Add buffer layers add_class=Add class add_connection=New connection... add_delete_edit_fields=Add, delete or rename field add_derivative_geometry_shp=Derivative geometries... add_derivative_geometry_shp_info=This tool generates a new shapefile layer with derivative geometries based on selected features\:
\nPoints to lines,\npoints to polygons or\nlines to polygons. add_errors_csv=Write errors to CSV file add_expression=Add field add_field=Add field add_geometric_info=Add geometry info... add_influence_areas_layers=Add buffer zone layers add_layer=Add layer... add_operator=Add operator add_rows=Add rows add_selected_button_TOOLTIP_HTML_explanation=Add selected add_text_area=Add text area add_vertex=Add vertex addband_error=Failed adding bands of selected file to dataset. adding_a_non_symbol_as_element= adding_legend_file_format_support=Adding support for legend file formats addlayer= addlibrary_supera_limite=The number of generated parts is large. Processing could take a long time. Continue? address=Address address_type= adjacent-polygon=Adjacent polygon adjust_grid= adjust_to_rois=Set to maximum extent of layer's ROIs adjust_transparency=Set transparency advanced=Advanced advanced_settings=Advanced options advanced_view=Advanced view advertencia_nad=Important\: Transformation applies only within grid limits. affine_algorithm=Affine transformation agrupacion=Grouping agrupar=Group agrupar_capas=Group layers agrupar_graficos=Group objects agrupar_linea=Group border with objects ajustar_entrada=Adjust to input data ajustar_limites=Subrange ajustar_rejilla=Snap to grid ajustes_linea_grafica=Border settings aleatory=Random alerta= algorithm=Algorithm algoritmo= alias=Alias align_center=Align center align_down=Align bottom align_left=Align left align_right=Align right align_to_layout_center=Align in center of layout align_to_layout_down=Align in bottom part of layout align_to_layout_left=Align in left part of layout align_to_layout_right=Align in right part of layout align_to_layout_up=Align in top part of layout align_to_layout_vertical_center=Align in vertical center of layout align_up=Align top align_vertical_center=Align in vertical center alignment=Alignment alineamiento=Alignment\: alinear=Align alinear_graficos=Align objects all=All allWords=All words all_and_disordered=All items without order all_and_maintain_order=All items maintaining order all_and_ordered=All items in order all_bands=All bands all_features=All features all_fields=(Copy all old fields) all_supported_background_image_formats=All supported background image formats all_supported_legend_formats=All supported allow_label_overlapping=Allow overlapping labels allowedMEditionPMConfigurationLabel=Allow text editing with mouse allowedRepeatedItemsConfigurationLabel= almacenar_sc_de_vista=Save view's spatial reference system alpha=Opacity alphabetical_ordered=In alphabetical order already_exists_fields=Some new fields already exist in the original table alta=High altitude=Altitude alto=Height altura=Height\: alwaysZoomCheckBox= always_circular= always_horizontal=Always horizontal always_straight=Always straight ambito=Scope ampl_extent=Change extent of image to georeference anadir=Add anadir_filtro=Add filter anadir_tag=Add tag anadir_titulo= analysisview=Analysis view ancho=Width ancho_alto=Width x height ancho_x_alto=Width x height anchura=Width\: and= angle=Angle angulo_rotacion= annotation=Annotation annotation_preferences=Annotations annotation_tools=Annotation tools annotations=Annotations anterior=Previous anticlockwise= anyResult=The search has not produced any result. anyWord=Any word aplicando_brovey=Apply Brovey image fusion aplicando_filtros=Applying filters... aplicando_ihs=Apply IHS image fusion aplicar=Apply aplicar_capa=Apply to layer aplicar_transf=Apply user-defined transformation aplicar_vista=Apply to view aplicar_vista_previa=Apply to previous view apply=Apply apply_all=Apply selected option to all files apply_tasseledCap=Applying tasseled cap transformation. This may take a while. Please be patient... apply_visual_correction_to_glyph_for_precise_size_and_position=Apply visual glyph correction arbol=Tree arbol_decision=Decision tree tool arboles_decision=Decision tree... arc=Arc arc-minute=Arc minutes arc-second=Arc seconds arc_=ARC archivo=File arcims_catalog_error=Error retrieving catalog from ArcIMS server arcims_extent_error=Error retrieving ArcIMS service extent. arcims_image_resource=ArcIMS image arcims_legend_error=Error processing legend. arcims_load=Loading ArcIMS arcims_no_features=No features found. arcims_no_server=Invalid ArcIMS server arcims_properties=ArcIMS properties arcims_remote_not_found=Remote file not found arcims_server_error=ArcIMS server error arcims_server_status_col_name=Status arcims_server_timeout=ArcIMS server time-out. arcims_server_type_col_name=Type arcims_vect_resource=ArcIMS feature area=Area area_move_explanation=Move area over view, using the same distance for V1 and V2, independent from X and Y. area_scaling_explanation=Scale area over view, using the same scaling factor for X and Y for each vertex. area_trabajo=Working area arguments_added_to_a_costant=Arguments added to a constant. array_error=Array size error. arriba=Up arrow_decorator=Arrow decoration arrow_sharpness=Tip angle ascending_order=Sort ascending ascending_order_tooltip=Sort by selected field in ascending order asignar_coordenadas= ask_end_georef=Quit the georeferencing tool? ask_for_projection=Ask for settings when loading a raster with a projection other than
\nthat of the view ask_load_view=Add the georeferenced raster to the current view? ask_save_transformation=Save georeferencing for this raster? aspect=View options at_begin=At start at_best=Optimal at_end=At end at_field=at field at_fields=at fields at_least_one_incorrect_coordinate=At least one invalid coordinate. attention=Attention attributeName=Name attributeType=Type attributes=Attributes autocomplete-polygon=Self-adjusting polygon automatico=Adjust automatically autopolygon=Auto polygon autovalor=Eigenvalue autovector_statistics=Eigenvector matrix available_layers=Available layers available_services=Available services average=Average aviso_salir_salvando=Permanently update georeferencing for this layer? aviso_sin_extent_de_referencia=For this option you need to have at least one layer in the current view to use as reference. aviso_write_transform=Existing georeferencing data is going to be overwritten. Continue? avoid_overlapping=Avoid overlaps ayuda=Help ayuda_0=spacebar, 0\: View all ayuda_1_5=1-5\: Zoom levels ayuda_background=b\: Show/hide background ayuda_c=c\: Center ayuda_h=h\: This help ayuda_more_less=+/-\: Zoom in/out ayuda_wheel=Mouse wheel\: Zoom in/out azimuth=Azimuth a\u00f1adir=Add a\u00f1adir_banda=Add band b_splines=B-spline back=Previous back_transf=Go to previous transformation background=Background\: background_color=Background color background_style=Background style background_symbol= bad_expresion=Syntax error in expression. bad_expression_in_tree=Invalid or empty expression node in tree. baja=Low bajar=Down band=Band\: band_high=High resolution band band_math=Raster calculator band_math_tooltip=Raster calculator... banda=Band\: bandas=Bands bandas_imagen=Image bands bandas_statistics=Band statistics bandas_visualizacion=Visible bands only bands=Bands bands_number=Number of bands bands_panel=Bands bar_legend= barchar3d_legend= barchar3d_legend_desc= barchart_3D= barra=Bar\: base=base base_datos=Database based_upon_the_road_type=Based on road type bd=DB beepConfigurationLabel=Beep (alarm sound) behavior=Screen updates below=Below bicubico=Bicubic bilinear=Bilinear bitmap_and_svg_image_files=Bitmaps and SVG drawings black=Black block_size=Block size\: bloquear= bloques_procesos=Block size blue=Blue bmp=Windows Bitmap (*.bmp) boolean_value=Boolean value borra_seleccion=Delete borrador=Draft borrar=Delete borrar_libreria=Delete scheme borrar_todos=Delete all points borrar_uno=Delete selected point boton_limpiar=Clean boton_mostrar=Show all box=Box break=Break break_=Break brightness=Brightness brillo=Brightness brillo_y_contraste=Brightness and contrast brovey=Brovey browse=Choose... browser=Web browser btn_SummarizeForm_aceptar=Ok btn_SummarizeForm_cancelar=Cancel buffer=Buffer bufferWidth_TOOLTIP_HTML_explanation=Buffer width buffered=Buffered buscar=Search buscar_por_criterio_seleccion=SRS search by selected criteria button= button= button.resolution= button.resolution= button.resolution.calculate=Set screen density by= by_continue= by_turn= byte_order=Byte order cache=Cache cad= cad= cad.or=or cad_insert=CAD drawing tools cad_modificar=CAD object modifiers cad_selection=CAD selection tools cajetin=Grid calculando== calculando.== calculando.\= calculando\= calculando_estadisticas=Calculating statistics... calculando_feather=Calculating gradient... calculando_histograma=Calculating histogram... calculando_imagen=Calculating image. This may take a while. Please be patient... calculando_tasseled_cap=Calculating tasseled cap... calculando_transformacion= calcular=Calculate calcular_errores= calculate_expresion=Process expression calculate_expression=Process expression calculated_fields=Calculated fields calculated_in=Calculated in calendarBackOneMonth=Back one month calendarBackOneYear=Back one year calendarForwardOneMonth=Forward one month calendarForwardOneYear=Forward one year calendarSelectDate=Select date calendarTitle=Calendar calidad=Quality\: cambiar_el_alto_de_los_elementos_seleccionados_hasta_coincidir_con_el_mas_alto=Change the selected elements' height to match the highest one cambiar_el_ancho_de_los_elementos_seleccionados_hasta_coincidir_con_el_mas_ancho=Change the selected elements' width to match the widest one cambiar_el_tamano_de_los_elementos_seleccionados_hasta_coincidir_con_el_mas_grande=Change the selected elements' size to match the biggest one cambiar_ruta=Select... cambio_nombre=Rename... campo=Field campo_altura_texto=Field with text height\: campo_de_documentos_asociados= cancel=Cancel cancelSearchButton=Cancel cancel_edition= cancel_the_application_exit= cancel_the_application_termination=Do not close project cancel_tip=Undo last changes and exit tool for now cancelando=Cancelling... cancelando_espere=Cancelling. Please be patient... cancelar=Cancel cancelar_edicion=Cancel editing cannotReproject=Unable to reproject this spatial reference system. cannot_apply_to_a_non_polygon_layer=Not applicable to a non-polygon layer. cannot_be_null=Cannot be null cannot_exist_two_label_classes_with_the_same_name=There cannot be two label classes with the same name. cannot_get_double_value_from_an_integer_number_field_use_getInteger()_instead= cannot_install_labeling_method=Cannot set up labeling method. cannot_render_north= cannot_set_a_double_value_from_an_integer_number_field_use_setInteger(int)_instead= cantLoad=The WFS layer cannot be loaded cantTestThisMethod=The application cannot test this operation. cant_alter_table=Cannot alter this table cant_configure_parameters=Cannot set up parameters. cant_connect=Cannot establish connection cant_connect_wfs=Cannot connect to WFS cant_draw_preview=Cannot generate preview. cant_get_view== cant_get_view\= cant_load_table_fields=Cannot load fields of target table. cant_load_table_to_import_fields=Cannot load fields of source table for import. cant_reproject_from_any_of=Unable to reproject from any of cap_butt=Flat caps cap_round=Round caps cap_square=Square caps capa=Layer capaWMS= capa_a_reproyectar=Layer to reproject capa_exportada= capa_importada=Imported layer. Create spatial index for it? capa_nueva=New layer capa_raster=Raster layer capa_ya_pertenece_a_topologia=This layer cannot be selected as part of a topology. capas=Layers capas_edition_cache=Adjust snapping behavior of layers\: capas_jtree=Layers caracteres_erroneos= carga_capas=Layer loading options cargando_buffer= cargar=Load... cargar_en_toc=Load layers into TOC cargar_fichero= cargar_leyenda= cargar_rois=Load ROIs from shapefile cargar_sin_georef= cargar_toc=Add new layer to current view? cartografico= cartographic_support=Cartography cascada_enable= cascada_tooltip=Arrange windows by cascading them caseSensitiveConfigurationLabel=Case sensitive catalog_search=Geodata search categories=Categories cathegory=Category cathegoryAny=Any cathegoryBiota=Biota cathegoryBoundaries=Boundaries cathegoryClimatologyMeteorologyAtmosphere=Climatology, Meteorology and Atmosphere Studies cathegoryEconomy=Economy cathegoryElevation=Elevation cathegoryEnvironment=Environment cathegoryFarming=Farming cathegoryGeoscientificInformation=Geosciences cathegoryHealth=Health cathegoryImageryBaseMapsEarthCover=Earth cover maps and imagery cathegoryInlandWaters=Inland waters cathegoryIntelligenceMilitary=Intelligence and Military cathegoryLocation=Location cathegoryOceans=Oceans cathegoryPlanningCadastre=Planning and cadastral maps cathegorySociety=Society cathegoryStructure=Structure cathegoryTransportation=Transportation cathegoryUtilitiesCommunication=Utilities and communication causa_error_desconocida= celda=Cell size cellRendererConfigurationLabel=Cell renderer cellsize=Pixel size center_locator=Center locator center_on_flag=Center on flag center_raster=Center raster layer in view center_view=Center view on selected point centered=Center point centesimal_minute=Centesimal minutes centesimal_second=Centesimal seconds centimeters=Centimeters central_meridian=Central meridian central_point=Central point centrar_punto=Center view on selected point centro=center cerrar=Close chain=Chains chains_normalizated=chains normalized. change=Change... change_before=Bring forward change_behind=Send backward change_height=Change height change_location=Change... change_options_of_annotations=Change annotation options change_server=Change server change_service=Change service change_symbol=Change symbol change_the_editing_colors=Adjust color and opacity of markings\: change_view_proj=Change projection of view to that of raster change_width=Change width character_marker=Character marker character_marker_symbol=Character marker charged_operators=Loaded operators. charging_operators=Loading operators... chart_legend= chooseAttribute=Choose an attribute to search on choose_color=Choose color choose_connection=Connection choose_field=Choose field\: choose_image_format=Choose image format choose_marker=Choose marker... choose_symbol=Choose symbol... choose_table=Table circle=Circle circle_=CIRCLE circular=Circular circulo=Circle circumscribed=Circumscribed city=City clase=Class clase_habilitada=Suitable clasificacion=Classification tool clasificando_imagen=Image classification in process. This may take a while. Please be patient... class=Class class_color=Color classes=Classes classification=Classification... classification_field_does_not_exists= classifying_field_name_not_found=Classification field not found. clave=Password clear=Clear clear_expresion=Clear expression clear_expression=Clear expression clear_selection=Clear selection clip=Clip clip_raster_again=Clip the raster again? close=Close closeButtonTooltip= close_polyline=Close polyline closeanalysisview=Close analysis view closest_facility=Closest facility closest_facility_instructions=Directions closest_facility_solution=Routes closest_facility_solve=Find route cluster_tolerance=Cluster tolerance\: cmyktorgb=CMYK to RGB codeSelectedCrs=Code of selected SRS code_transformation=Transformation code codigo=Code coincidir_tamano= coincidir_tamanyo=Match up size col_arc_type=Segment type col_km_per_hour=km/h colocar_a_margenes=Draw with reference to margins colocar_alrededor_seleccionados=Draw around selected objects colocar_alrededor_todos=Draw around all objects colocar_delante=Move to top colocar_detras=Move to bottom color=Color color_field=Color field color_interpretation_continue=This will change the default color interpretation for this raster. Continue? color_ramp=Color ramp... color_schema= color_scheme=Color ramp color_texto=Text color\: colorbalancecmy=CMY balance colorbalancergb=RGB balance colores=Adjust colors colors=Colors column=Column column_not_found=Column not found columns=Columns\: com.iver.andami.messages.Messages=Messages com.iver.cit.gvsig.Herramientas= combinacion_no_asignable=It is not possible to save this selection of bands as default.\nEach band can have only one color interpretation. combine= comboaddresselements=Address Elements combodefaulttext=... combonamefields=Fields Names comentarios=Comments comenzar_edicion=Start editing comma=Comma commands=Commands commands_stack=Command stack compact_area= comparativo= compleja=Complex completeArrowKeySelectionConfigurationLabel=Complete selection using cursor keys completeMatchedItemConfigurationLabel= complex_selection=Complex selection complex_selection_=COMPLEX SELECTION componente=Component composicion_wavelets=Wavelet composition... compound=Compound compress=Compression compression=Compression comprimir_paleta=Compress color palette? comprobando_ascii= compute_minmax= computing_thiessen_polygons=Generating Voronoi diagram (Thiessen polygons)... computing_tin_triangles=Generating triangulation... concordancia=Match conectar=Connect conectar_db=Attempting to connect to the database with these parameters conectar_jdbc=Attempting to connect conection=Connection conexion_correcta= configuracion_andami_tooltip= configuracion_impresion=Printing configuration configurar=Configure configurar_ANDAMI=ANDAMI configuration dialog configurar_localizador=Configure locator... configurar_todas_las_extensiones=Select an extension from the list on the left (press "+" to unfold). configurar_todos_los_drivers= configuration=Configuration configurationParameters=Parameters for configuration of constructors configure=Configure configure_size= confirm_delete_register= confirm_gid= confirm_remove=Do you really want to remove? confirmacion=Confirmation confirmar=Confirm confirmar_borrar=Do you really want to remove the element? confirmation=Confirmation confirmation_dialog=Confirmation dialog confirmation_overwrite=Confirmation conflicto_de_nombres_de_mapas_al_pegar=Another map already exists that has the same name as one of the maps your are trying to paste. conflicto_de_nombres_de_tablas_al_pegar=Another table already exists that has the same name as one of the tables your are trying to paste. conflicto_de_nombres_de_vistas_al_pegar=Another view already exists that has the same name as one of the views your are trying to paste. conflito_de_nombres_de_tablas_al_pegar=Table name conflict on pasting. connect=Connect connectButton=Connect connect_error=Connection error connected=Connected connection_error=Connection error connection_name=Connection name connection_parameters=Connection settings connection_params=Connection settings connectivity= connectivity_analysis= consecutive_number= conservar_escala_visualizacion=Maintain view scale constant=Constant constantes_jtree=Constants constructors=Constructors consulta=Query contact_info=Contact information contact_organization=Organization contact_person=Name contact_position=Position contiene_espacios_en_blanco=Contains white space continue?=Continue? continue_by= contour=Contour lines extraction contourlines= contraer=Contract contrast=Contrast contraste=Contrast contrib=Contributors convirtiendo_ascii= convoultion_filter=Convolution filter... coor_center=Center coor_down=Down coor_geograficas=Location coor_left=Left coor_right=Right coor_up=Up coord_system=Coordinate system coordenadas_erroneas=Wrong coordinates coordenadas_pixel=Pixel coordinates coordenadas_reales=Real world coordenadas_recorte=Coordinates coordenadas_vacias=Empty coordinates coordinate_reference_systems=Coordinate reference systems coordinates=Coordinates coordinatesContains=contains coordinatesEnclose=encloses coordinatesEqual=equal coordinatesFullyOutsideOf=is completely outside of coordinates_from_area_left_bottom_vertex=Coordinates of area's bottom left corner point coordinates_from_area_right_up_vertex=Coordinates of area's top right corner point coordx=X (easting) coordy=Y (northing) copiar=Copy copias=Copies copy=Copy copyPreviousButtonTooltip= copySelectedButtonTooltip= copy_=COPY copy_features= copy_paste_geometries= core= corner_threshold=Corner threshold corners=Corners correct_expression=Expression is valid. correction_needs_user_interaction=Correction cannot be done automatically.\nUser interaction is required. cortar=Cut cost=Cost cost_facility_units= cost_field=Cost cost_field_text=Field with cost of traversing the segment cost_from_a_table_field=Compute cost from a table's field cost_units=Cost units cost_units_text=Cost units costs=Costs could_not_apply_legend=Cannot apply legend. could_not_find_layer=Could not find layer could_not_find_symbol_directory=Cannot find directory for symbol library. could_not_find_web_map_context_file=Cannot find Web Map Context file could_not_get_shape_type=Cannot determine geometry type. could_not_initialize_editor_= could_not_launch_process=Could not launch process. could_not_load_layer=Failed to load layer. could_not_open_picture_file=Cannot open image file could_not_restore_color_field=Cannot retrieve text color field. could_not_restore_rotation_field=Cannot retrieve text rotation field. could_not_restore_text_field=Cannot retrieve text field. could_not_restore_text_height_field=Cannot retrieve text height field. could_not_retreive_layer_field_names= could_not_retrieve_field_names= could_not_save_legend= could_not_set_labeling_to_labelable_element= could_not_setup_legend=Cannot set up legend. couldnt_add_some_panel_exception=Cannot add some panel(s)\: couldnt_load_panels_from_extension_point_exception=Cannot load some panel(s) for extension\: couldnt_load_panels_from_list_exception=Cannot load some panel(s) from list\: couldnt_load_some_panel_exception=Cannot load some panel(s)\: countries_of_the_world=Afghanistan;Albania;Algeria;American Samoa;Andorra;Angola;Anguilla;Antarctica;Antigua and Barbuda;Argentina;Armenia;Aruba;Ascension Island;Australia;Austria;Azerbaijan;Bahamas;Bahrain;Bangladesh;Barbados;Belarus;Belgium;Belize;Benin;Bermuda;Bhutan;Bolivia;Bosnia and Herzegovina;Botswana;Bouvet Island;Brazil;British Indian Ocean Territory;Brunei;Bulgaria;Burkina Faso;Burundi;Cambodia;Cameroon;Canada;Cape Verde;Cayman Islands;Central African Republic;Chad;Chile;China;Christmas Island;Cocos (Keeling) Islands;Colombia;Comoros;Congo (DRC);Congo;Cook Islands;Costa Rica;C\u00f4te d\u0092Ivoire;Croatia;Cuba;Cyprus;Czech Republic;Denmark;Djibouti;Dominica;Dominican Republic;Ecuador;Egypt;El Salvador;Equatorial Guinea;Eritrea;Estonia;Ethiopia;Falkland Islands (Islas Malvinas);Faroe Islands;Fiji Islands;Finland;France;French Guiana;French Polynesia;French Southern and Antarctic Lands;Gabon;Gambia, The;Georgia;Germany;Ghana;Gibraltar;Greece;Greenland;Grenada;Guadeloupe;Guam;Guatemala;Guernsey;Guinea;Guinea-Bissau;Guyana;Haiti;Heard Island and McDonald Islands;Honduras;Hong Kong SAR;Hungary;Iceland;India;Indonesia;Iran;Iraq;Ireland;Isle of Man;Israel;Italy;Jamaica;Japan;Jordan;Jersey;Kazakhstan;Kenya;Kiribati;Korea;Kuwait;Kyrgyzstan;Laos;Latvia;Lebanon;Lesotho;Liberia;Libya;Liechtenstein;Lithuania;Luxembourg;Macao SAR;Macedonia, Former Yugoslav Republic of;Madagascar;Malawi;Malaysia;Maldives;Mali;Malta;Marshall Islands;Martinique;Mauritania;Mauritius;Mayotte;Mexico;Micronesia;Moldova;Monaco;Mongolia;Montserrat;Morocco;Mozambique;Myanmar;Namibia;Nauru;Nepal;Netherlands Antilles;Netherlands, The;New Caledonia;New Zealand;Nicaragua;Niger;Nigeria;Niue;Norfolk Island;North Korea;Northern Mariana Islands;Norway;Oman;Pakistan;Palau;Palestinian Authority;Panama;Papua New Guinea;Paraguay;Peru;Philippines;Pitcairn Islands;Poland;Portugal;Puerto Rico;Qatar;Reunion;Romania;Russia;Rwanda;Samoa;San Marino;S\u00e3o Tom\u00e9 and Pr\u00edncipe;Saudi Arabia;Senegal;Serbia and Montenegro;Seychelles;Sierra Leone;Singapore;Slovakia;Slovenia;Solomon Islands;Somalia;South Africa;South Georgia and the South Sandwich Islands;Spain;Sri Lanka;St. Helena;St. Kitts and Nevis;St. Lucia;St. Pierre and Miquelon;St. Vincent and the Grenadines;Sudan;Suriname;Svalbard and Jan Mayen;Swaziland;Sweden;Switzerland;Syria;Taiwan;Tajikistan;Tanzania;Thailand;Timor-Leste;Togo;Tokelau;Tonga;Trinidad and Tobago;Tristan da Cunha;Tunisia;Turkey;Turkmenistan;Turks and Caicos Islands;Tuvalu;Uganda;Ukraine;United Arab Emirates;United Kingdom;United States of America;United States Minor Outlying Islands;Uruguay;Uzbekistan;Vanuatu;Vatican City;Venezuela;Vietnam;Virgin Islands;Virgin Islands, British;Wallis and Futuna;Yemen;Zambia;Zimbabwe country=Country coverage=Coverage covered_extension=Covered extent creaction=Creaction crear_1_capa_por_banda=Create one layer for each band crear_tabla=Save as DBF... crear_worldfile=Create world file create_annotation_layer=Create annotation layer create_network=Create network topology create_topology=Create topology created_with=Created with creating=Creating creating_main_window= creation_date=Creation date credentials= criterio_busqueda=Search criteria criterium=Criteria cross=cross cross_circle=Intersects or contains circle cross_polygon=Intersects or contains polygon crsAndTransformation=Spatial reference system and transformation crsRepeat=Repeated SRS crs_layer=SRS of the layer crs_no_selected=SRS not selected crs_no_selected.= crs_not_projected=SRS not projected crs_not_soported=SRS type not supported\: crs_usuario=User-defined crs_view=SRS of the active view crsview=CrsView cuadratico= cuadricula= cuadro_no_asociado=The georeferencing tool is not linked to any layer in the active view and will be closed. Please restart the tool on the appropriate layer. cuando_activo=When active cumulative=Cumulative cumulative_logarithmic=Cumulative logarithmic current=Current current_scale=Current scale curve_optimization=Curve optimization cut=Cut cyan=Cyan data= data_bits=Data bits data_origin=Datasource data_type=Data type database=Database name\: database_connection=Database connection database_name=Database name datatype_not_byte=Define the data ranges for digitization manually? date=Date date_button_explanation=Allows date selection date_format= date_value=Date value datos_visualizados=Current zoom datum=Datum dbf_default_encoding=DBF encoding de=of= de\=of de\ 0=of 0 debe_estar_activada= debe_insertar_el_punto_dentro_de_los_limites_de_la_geometria= debe_seleccionar_las_capas_de_las_que_quiera_obtener_informacion=Select one or more layers to query. debera_introducir_nombres_para_las_vistas_a_pegar=Provide new names for the views debera_introducir_nombres_para_los_mapas_a_pegar=Provide new names for the maps decimal_degrees=Decimal degrees decision_process_log=Processing decision tree. This may take a while. Please be patient... decision_trees=Decision tree... default=Default default_charset_name_for_dbf=Choose the default encoding for DBF tables from the list below. default_color=Default color default_fill_color=Default fill color default_font=Default font default_measure_units=Default measurement units\: default_measure_units_reference_system=Reference system for default units\: default_name=WFS layer default_projection=Default projection default_value=Default value\: default_view=Default view define_absolute_coordinates=Define absolute coordinates define_classes_of_features_and_label_each_differently=Define individual labeling classes define_coordinates_using_view=Pick coordinates from view define_fields=Define fields define_point=Define point defined_by_user=User-defined defined_by_view_extent=Defined by the view's extent definida_usuario=User-defined degree=Degrees degree_(supplier_to_define_representation)=Sexagesimal degrees (deg) degree_hemisphere=Sexagesimal minutes and hemisphere degree_minute=Sexagesimal minutes degree_minute_hemisphere=Sexagesimal degrees (deg\:min) and hemisphere degree_minute_second=Degrees, minutes, seconds (sexagesimal) degree_minute_second_hemisphere=Degrees, minutes, seconds (sexagesimal), and hemisphere dehacer=Undo del=Delete del_original_geometries=Remove objects from source? delete=Delete deleteText=Delete deleteText_on_filter_use_explanation=Delete filter rule deleteUsr=Delete user-defined SRS? delete_class=Delete class delete_field=Delete... delete_filter_expression=Delete filter delete_register= deleted_feature=Deleted feature densities=Densities densityfication=Density depth_factor= desactivado=Deactivated desactivar_capa=Hide layer after setting first point desactivar_puntos=Deactivate points layer after setting first point desagrupar=Ungroup desagrupar_capas=Ungroup layers desagrupar_graficos=Ungroup objects descending_order=Sort descending descending_order_tooltip=Sort by selected field in descending order desconectar= descripcion=Description descripcion_de_configuracion_capa_de_anotaciones=Leave at default to use the same settings for all features in the layer. For per-feature settings, select the attribute fields that hold the respective values. descripcion_de_crear_capa_de_anotaciones=This tool will create a virtual annotation layer based on an existing layer which allows to perform advanced labeling.

An annotation layer labels features in the selected layer with the value of an attribute table field. descripcion_de_crear_capa_de_anotaciones_nueva=This tool will create a new annotation layer based on an existing layer which allows to perform advanced labeling.

An annotation layer labels features in the selected layer with the value of an attribute table field. description=Description description_URL=URL description description_area=Description of area desde=From desde_arriba=From top\: desde_izquierda=From left\: desea_borrar_el_documento=Delete the selected documents? desea_borrar_la_capa=Delete the selected layers? desea_borrar_librerias=Delete the selected libraries? desea_continuar=Do you want to continue? desea_guardar_cambios=Save changes? deselect_all=Clear selection deselect_all_resources=Clear selection of resources deshacer=Undo despeckle=Despeckle desplaza_los_elementos_seleccionados_a_la_derecha=Move the selected elements to the right desplaza_los_elementos_seleccionados_a_la_izquierda=Move the selected elements to the left desplaza_los_elementos_seleccionados_al_centro_por_el_eje_x=Move the selected elements to the center along the X (horizontal) axis desplaza_los_elementos_seleccionados_al_centro_por_el_eje_y=Shift the selected elements to the center along the Y (vertical) axis desplaza_los_elementos_seleccionados_hacia_abajo=Move the selected elements to the bottom desplaza_los_elementos_seleccionados_hacia_arriba=Move the selected elements to the top dest_file=Target file dest_proj=Target projection desviacion_tipica=Standard deviation details=Details detailsTransformation=Transformation details detalles=Details deteccion_bordes=Edge detection diagrama_dispersion=Scatterplot diamond=diamond diez_paginas_atras= dif_proj=Projection of selected raster differs
from view's projection. Please select an option. different_distances_in_X=Different X (horizontal) distances different_distances_in_Y=Different Y (vertical) distances different_scale_factors=Different scale factors digitizedDirection="Digitized direction" digitized_direction=Direction of digitization dimension=Dimension dimensiones=Dimensions directorio=Directory directorio_extensiones=Extensions directory disable_3d_edition= disable_filter_by_area=Disable filter by area disable_for_onelyr_rules=Disabled for single-layer rules. disabled=Disabled disagregate_layers=Maintain layer structure discard_changes=Discard changes discard_changes_and_close_current_project=Discard changes and close current project discard_changes_and_exit=Discard changes and exit disconnect=Disconnect disordered=Unordered disp_columns=Column spacing\: disp_rows=Row spacing\: displayAllItemsWithArrowButtonConfigurationLabel=All items with arrow button display_3d= distTolerance=Distance tolerance distance= distanceUnitsLabel_TOOLTIP_HTML_explanation=Distance measurement unit distance_area=Area measurement units\: distance_section= distance_units=Measurement units distance_x=X (horizontal) spacing distance_y=Y (vertical) spacing distancia_inversa=Inverse distance distancia_malla_incorrecta=Incorrect grid distance. distancia_no_numerica=Please provide a numeric distance value. distinto_extent=Allow different extents distribuir=Distribute distribuir_elementos_sobre_todo_el_layout=Distribute the elements over the whole layout distributes_down=Spread from bottom distributes_horizontal=Spread elements horizontally distributes_left=Spread from left distributes_right=Spread from right distributes_to_layout_down=Spread from bottom of layout distributes_to_layout_horizontal=Spread layout horizontally distributes_to_layout_left=Spread from left of layout distributes_to_layout_right=Spread from right of layout distributes_to_layout_up=Spread from top of layout distributes_to_layout_vertical=Spread layout vertically distributes_up=Spread from top distributes_vertical=Spread vertically distribuye_el_espacio_entre_los_elementos_en_horizontal=Distribute space between elements horizontally distribuye_el_espacio_entre_los_elementos_en_vertical=Distribute space between elements vertically distribuye_los_elementos_seleccionados_de_forma_equidistante_de_abajo_hacia_arriba=Spread the selected elements equidistantly from bottom to top distribuye_los_elementos_seleccionados_de_forma_equidistante_de_arriba_hacia_abajo=Spread the selected elements equidistantly from top to bottom distribuye_los_elementos_seleccionados_de_forma_equidistante_de_derecha_a_izquierda=Spread the selected elements equidistantly from right to left distribuye_los_elementos_seleccionados_de_forma_equidistante_de_izquierda_a_derecha=Spread the selected elements equidistantly from left to right distribuye_los_elementos_seleccionados_de_forma_equidistante_y_horizontal=Spread the selected elements horizontally and equidistantly distribuye_los_elementos_seleccionados_de_forma_equidistante_y_vertical=Spread the selected elements vertically and equidistantly divided_by_0=Division by 0. divisiones_izquierda=Intervals left of "0"\: do_you_want_to_overwrite_it=Do you want to overwrite? documento=Document documento_no_reconocido=Unrecognized document type documentos_existentes=Existing documents doesnt_exist=Does not exist done=Done dont_find_the_file=File not found dont_show_labels_when_zoomed=Do not show labels when zoomed ... dot_density=Dot densities dot_size=Dot size\: dot_value=Dot value\: double_value= downloadColumn=Download draw_bar_chart_for_each_feature= draw_pie_chart_for_each_feature= draw_quantities_for_each_category=Vary color and symbol styles for two independent fields. This can be used to visualize the relationship of two attributes with each other. draw_quantities_using_symbol_size_to_show_exact_values=Vary symbol sizes proportionally to normalized field values. This exactly relates value differences to symbol size differences. draw_quantities_using_symbol_size_to_show_relative_values=Vary symbol sizes gradually to show quantitative differences in field values. draw_route=Draw draw_symbols_in_specified_order=Draw symbols in specified order\: draw_text_only=Show label text only drawing_type=Curve plot\: driver=Driver driver_error=Driver error. driver_exception=Driver exception (fatal error). drivers=Drivers duplicar_libreria=Duplicate library duplicate=Position of label points\: duplicate.none=None duplicate_labels=Repeated labels during= dxf=AutoCAD DXF... dxf_files=DXF files dynamic_and_disordered=Dynamic and unordered dynamic_and_maintain_order=Dynamic with maintained order dynamic_and_ordered=Dynamic and ordered e-mail=E-mail edge_Feathering=Edge feathering edicion=Editing edit= edit_copy=Copy edit_cut=Cut edit_delete=Delete edit_expression=Edit expression edit_layer_properties_to_fix_them=Edit layer properties to correct them. edit_paste=Paste edit_redo=Redo edit_select_all=Select all edit_settings=Modify... edit_style=Edit style edit_undo=Undo edit_vertex=Edit vertex edit_vertex_=EDIT VERTEX editable=Editable editable_layer_select= editable_layer_select_info= editar=Edit editar_propiedades= editar_vertices=Edit vertices edited_layer= editing=Editing editing_layer_unsaved=Unsaved edited layer editing_table_unsaved= edition_properties=Editing settings... editor_clase=Classes editor editor_expresiones=Expressions editor ejecutar=Execute ejex=X axis\: ejey=Y axis\: el_fichero=The file el_numero_maximo_de_intervalos_para_este_campo_es=The maximum number of intervals for this field is elementName=Element name elemento_ya_existe=Element exists already elementos=Elements elementos_jtree=Elements eliminar=Delete eliminar_capa=Delete eliminar_columna=Delete column eliminar_extremos=Remove extremes eliminar_fila=Delete row eliminar_filtro=Delete filter eliminar_punto=Delete point eliminar_puntos=This operation will overwrite all points in the table.\nDo you want to continue? eliminar_todos_puntos=Delete all points elimination=Deletion ellips= ellips= ellipse=Ellipse ellipse_=ELLIPSE ellipsoid=Ellipsoid emptyLayer= empty_panel_group_exception=Empty panel group. empty_panel_group_gui_exception=Empty panel in GUI. en=in en_el_mapa=On the map\: en_language=English en_unidades=in selectable units. enable=Enable enable/Disable=Enable/disable enable_3d_edition= enable_filter_by_area=Enable filter by area enable_labeling=Enable labeling enabled=Active end=End end_georef=Exit (and save) end_polygon=Finish polygon end_style=Endings end_test_georef=Reset endinfo=Result statistics endnormalizing=Normalization process finished enhanced=Enhancement enhanced_rad=Radiometric enhancement... enhancement= enlace_vivo=Live link enter_description=Description\: enter_layer_name=Enter layer name enter_new_layer_name=Enter name for new layer enter_new_name=Enter new name enter_path_to_file=Enter file path envelope=Envelope equal_intervals=Equal intervals equalization=Equalization equidistance= equidistar=Equal intervals erase= erases_coordinates= error=Error errorFENotSupported=The server supports none of the currently provided filter encoding styles. errorGetRecords=Error attempting to retrieve records ('getRecords' operation). errorGettingTable= errorIsASRWServer=This is an SRW server. errorMessageJComboBoxItemsSeekerConfigurable=Invalid configuration. errorNotCSWSupportedProtocol=Server found, but it does not support the CS-W protocol. errorNotParsedReply=Error parsing the reply. The server was found, but it is possible that it does not support the specified protocol. errorNotSupportedCapabilities='GetCapabilities' request error. This could have two reasons\: either an error occurred during the operation or the server does not support the specified protocol. errorNotSupportedProtocol=The server does not support the specified protocol. errorNotThesaurusSelected=Please select a thesaurus element. The WFS protocol cannot work without it. errorSOAPProtocol=Simple Object Access Protocol (SOAP) error. errorSavingData= errorServerException=The server returned an exception (fatal error). errorServerNotFound=Server not found. error\ accessing\ to\ the\ layer= error_abriendo_el_documento=Error opening document error_abrir_fichero=Error opening file error_adding_default_value_to_projection_parameter=Error while trying to insert default value into projection parameter. error_adding_filters=Application of filters encountered problems.\nProcesses will not be executed until all \nproblems have been resolved. error_adding_leyend=Error adding legend to layer error_adding_max_value_to_projection_parameter=Error attempting to insert maximum value into projection parameter. error_adding_min_value_to_projection_parameter=Error attempting to insert minimum value into projection parameter. error_adding_parameter_projection_name=Error attempting to insert projection parameter name. error_adding_projection_acronym=Error attempting to insert projection acronym. error_adding_projection_name=Error attempting to insert projection name. error_adding_projection_parameter=Error attempting to insert projection parameter. error_adding_stats= error_adding_unit_name=Error attempting to insert unit name. error_aplicando_filtro=Error applying filter. error_capa_puntos=Error loading points. The Georeferencing layer may be inactive. error_carga_capa=Error loading layer. error_cargar_capa= error_clasificacion_roi=Error processing classification. Check\: error_clone_layer=Error cloning layer. error_codifying_dates= error_codifying_filter_query= error_codifying_numbers=Error parsing numbers. error_codifying_words= error_coding_filter_query=Error parsing SQL query. error_comprobando_el_tipo_de_shape= error_comunicacion_servidor= error_conexion=Error connecting to database. error_creando_filtro=Error creating one of the filters. error_creando_regla=Error creating rule. error_create_overviews=Could not create overviews. error_creating_rois=Error creating ROIs. error_cutting=A general error occurred while cutting the raster. error_datos_entrada=Data entry error. error_dont_exists_layer=Layer does not exist. Preview cannot be generated. error_escritura=Write error. Project file could not be saved error_expresion=Expression error. error_expression=Expression error. error_extensiones_soportadas=Error retrieving list of supported extensions. Layer cannot be exported. error_file_exists=File exists. Do you want to overwrite? error_file_not_find_driver=Driver could not find a file. error_file_not_found=File not found. error_file_not_valid=Selected file not recognized as valid. error_file_not_writable=Could not create output file. error_filtering=An error has occurred while adding filters. error_georasterwriter=Writing error in GeoRasterWriter. error_georef=Error applying georeferencing information. error_importando_tabla_color_rmf=Selected rmf file hasn't color tables. error_lectura=Read error. Cannot open project file error_leyendo_rmf=Error reading RMF file. The file must exist and \nyou must have read permission. error_load_layer=Layer could not be loaded into TOC. Try adding it manually. error_lookingfor_view=Selected view not found.\nCould not load georeferencing view. error_message=Error error_not_suported_extension=Couldn't find writer. Not supported extension. error_obtaining_default_value_to_projection_parameter=Error obtaining default value for projection parameter. error_obtaining_max_value_to_projection_parameter=Error obtaining maximum value for projection parameter. error_obtaining_min_value_to_projection_parameter=Error obtaining minimum value for projection parameter. error_obtaining_projection_acronym=Error obtaining projection acronym. error_obtaining_projection_name=Error obtaining projection name. error_obtaining_projection_parameter_name=Error obtaining projection parameter name. error_obtaining_unit_list_of_projection_parameter=Error obtaining list of projection parameter units. error_obtaining_unit_name=Error obtaining unit name. error_opened_file=File is opened in a project view. Close layer before saving. error_opening_the_document=Error opening document error_openning_project=Error opening project error_parsing_comboscale_elements=Error parsing combo-scale elements. error_parsing_comboscale_value=Error parsing combo-scale value. error_point_file=Selected points file is not valid. error_preview_render=Cannot generate preview. error_prime_meridiam_parameters=Error in prime meridian parameter. error_printing_layer=Error printing layer. error_processing=An exception (fatal error) has been encountered.\nThe process was aborted.\nSee file 'gvSIG.log' for more information. error_props_show=The layer is currently in an inconsistent state. Please wait until all computations in process have finished. error_props_tabs=Properties panel closed\: Cannot open another tab. error_render_preview=Error rendering preview. error_reprojecting=Reprojection error. error_roi_not_selected= error_rois_table=Error in ROIs table. error_rowtable=Error adding row to table. error_salvando_rmf=Error writing to RMF file. error_saving_table=Error saving table error_set_view=Error setting parameters for loading the view. error_setview_preview=Error converting view to preview. error_transformacion=Error in transformation parameters. error_transformacion1=Cannot compute the inverse transformation for any of the supplied points. error_trying_to_access_to_the_layer=Error on attempting layer access error_validating_filter_query=Error validating SQL query. error_validating_sql_filter_query=Invalid filter format\: Error validating SQL query. error_view_not_found=Error\: View not found. error_write_overviews=Failed to save overviews. error_writer=Writer not found. error_writer_notsupportedextension=No output driver registered for given file extension. error_writing_ascii= error_writing_file= error_writing_project=Error saving the project. error_writting_file=Error writing file. error_writting_file=Error writing file. erroraddfieldstable=Adding news fields to main table errordoubledname=There are fields with identical names in the main table errores=Errors errores_csv=Write errors to CSV file errorformattingdate=Formatting date errorformattingdaterow=Formatting date in row errorformattingdecimalrow=Formatting double in row errorformattingintegerrow=Formatting integer in row errorformattingnumberrow=Formatting number in row errorformattingstringrow=Formatting string in row errormodifyoritable=Altering original table errornotselectedfield=There is no field selected in the main table errornullsubstring=Null substring replaced with whitespace in row errortabledontaltered=Table was not modified errorwrittingdbf=Writing DBase file es_country=Spain es_language=Spanish escala=Scale escala_desconocida=Unknown scale escala_maxima=Maximum scale escala_minima=Minimum scale escala_usuario=Keep constant escale=Scale escribiendo_resultado=Writing result data... espaciado_horizontal=Horizontal grid spacing espaciado_vertical=Vertical grid spacing espaciales=Spatial functions espacio=Space\: espectrales=Spectral functions espere=Please wait esta_formato_desconocido=is in an unrecognized format estadisticas=Statistics estadisticas_calculadas=Calculated statistics. estado= este_por_debajo_de_=... is below este_por_encima_de=... is above estilos=Styles estimated_error=Estimated error etiquetas=Labels eval_expresion_will_be_carried_out_right_now_with_current_values_in_table=Expression will be evaluated for current values in table. eval_expression_will_be_carried_out_right_now_with_current_values_in_table=Expression will now be evaluated for current values in table. evaluate=Evaluate evaluate_expresion_with_errors=Evaluation of expressions finished with errors. evaluate_expression_with_errors=Evaluation of expressions finished with errors. event=Event events=Events exactSentence=Exact phrase examinar=Choose... exception_cloning_legend=Exception (fatal error) encountered while cloning legend. expandir=Expand explanation_sense_field=1-> As digitized
2->Inverse
3-> Both exploit=Exploit exploit_=EXPLOIT explorer=Explorer exponential=Exponential export=Export exportJOP2Title=Export to JOP2T... export_libreria=Export scheme export_to=Export to export_to_map_context=Export to Map Context... export_to_raster=Export to raster... exportando_features=Exporting features... exportar=Export... exportar_a= exportar_ascii= exportar_pdf=Portable Document Format (PDF)... exportar_ps=Postscript (PS)... exporting_=Exporting\: expresion=Expression expresion_error=Expression error expresions=Filtered expresions_from_file=Expressions from file expression=Expression expression_creator=Create filter expression expressions=Expressions expressions_from_file=Expressions from file extDerivedGeometries=Derivative Geometries Extension extProjectBackup=GVP Backup Extension extQuickInfo=Quick Info Extension extSelectionTools=Selection Tools Extension ext_rs_is_not_a_multiband_layer=This tool only works on multiband raster layers (e.g. RGB images).\nThe selected layer is not a multiband layer. ext_rs_multi_band_layers_required=Minimum required number of multiband layers\: ext_rs_no_multiband_layers=This tool only works on multiband raster layers (e.g. RGB images).\nThere are no multiband layers in the active view. ext_rs_not_enough_multiband_layers=This tool only works on multiband raster layers (e.g. RGB images).\nThere are not enough layers of this type in the active view. extend=Extend extend_=EXTEND extension=Extension extension_activada=Load extension on startup extension_capa=Get from layer\: extension_from=Extent extension_no_soportada=Selected format is not supported. extension_point_load_extension=Error loading point of extent\: extension_vista=Use extent of view extensiones=Extensions extents_no_coincidentes=Extent of selected image does not match that of the source image. exterior=Exterior extraer=Extract facilities=Facilities facilities_loaded_in=Facilities loaded in facility=Facility factor=Factor factor_zoom_incorrecto=Incorrect zoom factor. failed= failed_accessing_file=File access failed. failed_acessing_files= failed_applying_following_line_will_use_default_confg=Failed to apply follow-line labeling. Default mode will be used instead. failed_calculating_intervals=Failed to calculate intervals. failed_computing_intervals=Failed to compute intervals. failed_creating_object=Failed to create object. failed_creating_the_temporal_layer=Failed to create temporary layer. failed_installing_symbol_editor=Failed to install symbol editor. failed_reading_file= failed_restoring_online_resource_values= fallo_capas=Layer access error. The following layers will be deleted from the project fallo_crear_conexion= fallo_crear_pool= fallo_obtener_conexion_existente= fallo_obtener_tablas= fallo_realizar_consulta= fallo_registrar_conexion= false=False false_easting=False easting false_northing=False northing family=Family fathom=Fathoms fax=Fax feathering=Feathering feature=Layers feature_Selection_Info=Select a layer to load from WFS server. feature_to_load=Layer to load featureclass=Feature class features=Basic features_desea_continuar=features. Continue? features_of_destination_lyr=Second layer (B)\: features_of_first_layer=First layer (A)\: featureserver=Features service feet=Feet fichero=file fichero_creado_en=File written to fichero_creado_en_formato=File saved in format fichero_existe=File exists fichero_generado=File has been generated. fichero_incorrecto=Invalid file fichero_ya_existe_seguro_desea_guardarlo=The file already exists. Do you want to continue? fid1=FID 1 fid2=FID 2 field=Field field_added_successfully=Field successfully added. field_already_exists=Field exists already field_configuration=Segment data fields field_decimal_count=Decimal precision field_default_value=Default value\: field_for_link_not_found_in_table=Link field not found in target table. field_for_link_not_found_in_table_to_import=Link field not found in table to import. field_length=Length field_manager=Manage fields (schema) field_name=Field name\: field_name_conflict=Hint\: Field name conflict (duplicate fields?). field_number=Label no. field_size= field_to_be_labeled=Label field field_toolbar=Field calculator field_type=Type fields=Fields fields_Selection_Info=Select attribute table fields to load (not all WFS servers support this).\nThe geometry storage field must always be selected. fields_exp=Fields fields_of_the_selected_feature_explanation=Attribute fields of selected feature.\nEach field must be enclosed in quotation marks. fields_uppercase_first=Fields file=File file_corrupt=File corruption error file_doesn_exists= file_exists=File exists. Overwrite? file_generated= file_name=File file_not_found== file_not_found\= file_size_in_bytes=File size file_too_big=Input raster is too big to create a TIFF file (>4GB).\nIt will be saved as a compressed JPEG2000 file instead. file_version=File version fileexists=File exists. Process canceled. filenotfound=File not found filenotoverwrite=File was not overwritten. filenotsave=File was not saved. files=Files fill=Fill\: fill_color=Fill color fill_name=Provide name fill_opacity=Fill opacity\: fill_pattern=Fill pattern fill_properties=Fill properties filter=Filter filterOnALayer=Filter on a layer filterOnAWFSLayer=Filter on a WFS layer filterTooltip= filter_by_area= filter_by_sentence=Filter by phrase filter_contains= filter_contains_window_title= filter_different= filter_equals= filter_filter= filter_numeric_different= filter_numeric_equals= filter_numeric_greater= filter_numeric_less= filter_of_Table=Table filter filter_raster_again=Process raster again? filter_remove_filter= filter_with_an_incorrect_format=Filter has incorrect format. filter_write_string= filtered_features=Filtered features filtro=Filter filtro_de=Parameters for filtros=Filters final_point=Final point finalizar=Finish finded=found finish=Finish finishprocess=Process finished. first_derivative= first_transf=Go to first transformation fit_ArcIms_layer=ArcIMS layer settings fit_WCS_layer=WCS layer settings fit_WFS_layer=WFS layer settings fit_WMS_layer=WMS Layer settings fit_inside_polygon=Fit inside polygon fit_on_text_area=Fit into text area fixedScaleCheckBox= fixed_color=Fixed color fixed_height=Fixed height fixed_size= fixed_text_size=Fixed text size\: flag_amount=Number of stops\: flip=Inversion flip_all=Invert all flip_first=Invert first flip_lines_layer_message=Inverting order of line nodes... flip_lines_note=Flipping line folder_images=Symbol images directory follow= following_area=Follow area following_line=Follow line fondo=Background font=Font font_color=Font color\: fontcolor=Font color\: fontheight=Font height\: fontrotate=Font rotation\: fontstyle=Font style\: fonttext=Text\: fonttype=Font type\: foot=Feet forceCoincidencesConfigurationLabel= force_scale=Force scale\: foreground_alpha= format=Format formato=Format formato_de_numero_incorrecto=Incorrect number format. formato_del_campo_incorrecto=Incorrect field format. formato_incorrecto=Incorrect format. formato_no_numerico=Format must not be non-numeric. formatos=Format formatted=Formatted frame= frei_chen= freichen=Freichen from=From fuente=Format fuera_de_extent=Selected point is outside of image extent. fullExtent=Set to full extent of raster layer full_view=Zoom to full extent funciones_jtree=Functions function=Function fusion=Image fusion... fusion_atrous="A trous" fusion fusion_pc=Applying image fusion using principal components... fusion_wavelets=Applying image fusion using "a trous" wavelets... fusionando_imagen=Generating image. This may take a while. Please be patient... gauss=Gauss gaussian= gazetteer_connect=Find by gazetteer gazetteer_search=Find by gazetteer gcps_exist=GCPs exist gdbmsdbfdriver=Driver dbf generacion_overviews=Create overviews when loading a raster general=General general_info=Dataset information generalization_factor=Generalization factor\: generando_bloque=Creating block generando_histograma=Generating histogram. Please be patient... generando_pcs=Generating principal components image... generando_recorte=Clipping... generando_roi=Generating ROI... generando_scatterplot=Generating scatterplot... generar_fichero=Create file generar_overviews=Create overviews generate_mosaic=Generating image mosaic. This may take a while. Please be patient... generate_news_fields=Generating new fields generate_report=Show route information generating_intervals=Generating intervals... generating_pie_legend= geo_field=Geometry field\: geo_field_error=Error processing geometry fields. geo_field_not_available=Error while retrieving valid geometry fields. geo_raster=GeoRaster geodb_connections=Geodatabase connections geogcs=GEOGCS geoloc=Locate geolocation=Transformation... geometries=geometries geometry=Geometry geometry-info=Geometry details WKT geometry_without_internal_shape_at_row=Geometry with undefined shape type at row georaster=Georeferencing georef=Georeference georef_algorithm=Georeferencing algorithm georef_file=File to georeference georef_loading=Loading georeferencing tool... georef_type=Georeferencing type georeferenciado=Georeferenced georeferencing=Georeferencing georref=Georeferenced georreferenciacion=Georeferencing... georreferenciacion_process=Georeferencing tool georreferenciado=Georeferenced georreferenciar=Georeference image georreferencing_log_message=Georeferencing image. This may take a while. Please be patient... geounits=Map units\: gestion_encuadre=Zoom manager... gestor=ROI editor gestor_db=Geodatabase manager get_tool_focus=Get tool focus get_view=Current view getting_layer_shape_type=Retrieving layer shape type... getting_shape_type=Determining shape type... girar_elementos_a_medida_que_se_copian=Rotate elements by copied measure global=Global gml=Geography Markup Language (GML)... gml_files=Geography Markup Language (*.gml) gml_validate_with_schema= goFirstButtonTooltip= goLastButtonTooltip= goNextButtonTooltip= goPreviousButtonTooltip= gon=Centesimal degrees (grads/gon) goto=Go to location gpe_coordinates=Decimal symbol gpe_coordinatesSeparator=Coordinates separator gpe_create_default_schema=Create a default schema gpe_decimalDigits=Decimal number gpe_defaultBlancSpace=Blank space for label names gpe_exporting=Exporting layer... gpe_gvsig_dont_support_multilayer=Multilayers are not supported. All geometries have been merged into one layer. gpe_namespacePrefix=Namespace prefix gpe_namespaceURI=Namespace gpe_preferences_window=GML Persistence Engine gpe_preferences_window_coordinates=Coordinates gpe_preferences_window_other=Others gpe_preferences_window_xml=XML gpe_preferences_window_xmlschema=XML schema gpe_schemaName=Default namespace gpe_select_file=Select file gpe_select_format=Select format gpe_select_schema=Select schema gpe_select_version=Select version gpe_select_writer=Select writer gpe_select_writer_window=Export to file gpe_tuplesSeparator=Coordinate pairs separator gpe_xmlEncoding=XML encoding gpe_xmlVersion=XML version gps_control_panel=GPS control panel gps_not_ready=GPS device is not ready. Please try again. gps_settings=GPS settings grad=Centesimal degrees (grads/gon) gradient_color=Gradient color gradient_fill=Gradient fill gradient_fill_symbol=Gradient fill grado_polinomio=Polynomial degree grados=Degrees graduated_symbols=Graduated symbols grafico=Graphic gray=Gray grayconversionscale=Black-and-white conversion grayescaleconversion=Grayscale conversion grayscaleconversion=Grayscale green=Green greenwichLongitude=Meridian of longitude grid=Grid grids_en=Grids in grosor_linea=Line width\: group=Group group_graphic_line=Group border group_layers=Group layers group_layers_option=Layer grouping option grupo=Group guardado=Saved as guardando_capa=Saving layer... guardar=Save guardar_cambios=Save changes? guardar_clave= guardar_como=Save as... guardar_como_plantilla=Save as template... guardar_como_predeterminado=Set current color table as default for this layer? guardar_en_disco=Save in directory\: guardar_leyenda= guardar_predeterminado=Save as default guardar_proyecto=Save project guardar_tabla=Save table guardar_tooltip=Save changes to project guess_image_geometry= gvSIG= gvSIG_archivos=Project file management gvSIG_cant_save_changes_in_this_kind_of_format=Changes cannot be saved in this format. gvSIG_export=Layout export tools gvSIG_style_definition_file= gvSIG_symbol_definition_file=Symbol Definition File gvsig= halo=Halo has_bad_format=has bad format hasta=to hay_mas_de_una_geometria_seleccionada=Please select more than one geometry. headerTableAttribute= headerTableValue= header_Size=Header size height=Height help=Help hemisphere_degree=Sexagesimal degrees and hemisphere hemisphere_degree_minute=Sexagesimal (deg\:min) and hemisphere hemisphere_degree_minute_second=Sexagesimal (deg\:min\:sec) and hemisphere hiatogramMatchLog=Applying histogram matching to selected images. This may take a while. Please be patient...\n\nCurrent image\: hidePopupIfThereAreNoItemsConfigurationLabel=Hide pop-up if there are no items hide_grid= high=Height highpassfilter=High-pass filter histogram_error=Error calculating histogram. histogram_matching=Histogram matching histogram_type=Type histograma=Histogram histograms=Histograms histohramMatchProcess=Histogram matching... horizontal=Horizontal horizontal_space=Horizontal space host=Server URL or IP hostname= hours=Hours hsltorgb=HSL to RGB html_in_a_new_view=Creates a new view in the project. The new view will contain all the layers defined in the file. html_in_other_view=Select view\: html_in_the_current_view=Adds the layers defined in the file to the currently active view. html_recalibrate=

In some cases, the data obtained by the GPS device may be inaccurate because of projection errors.

To re-calibrate, press the Calibrate button and click in the view to select the location of the device.

hue=Hue i_j_minutes_kilometers= i_j_secs_meters= id=ID id_error=ID error id_field=ID field\: id_not_available=ID not available for idioma=Language ignoreButton= ignore_raster_proj=Ignore raster's projection info and load ignore_zero_values= igual_todos_lados=Same distance from all edges\: ihs=IHS image=Image image_fusion=Fusing images... image_fusion_process=Image fusion tool image_master=Master image\: imagen=Image imagen_clasificar=Image to classify\: imagen_completa=Whole layer imagen_landsat=Landsat image imagen_no_accesible=Image access error. imagen_transformar=Image to transform\: imagenes=Images (*.bmp, *.png, *.jpg, *.jpeg) imageserver=Image (raster) service imagex=Image X imagey=Image Y import=Import import_fields=Import fields... import_from_ascii=Import table from a CSV text file import_layer= import_libreria=Import scheme import_map_context=Import from OGC Web Map Context document (*.cml) importar=Import importarRejilla=Import grid\: importar_extent=Import current view's extent impresora=Printer setup imprimir= in=in in_beyond=... in beyond in_layer=in layer in_proj4_projection=Invalid PROJ.4 setting\: in_the_middle=In the middle in_the_paper=Print layout in_the_world=Real world inches=Inches incompatible_types_of_link_fields=Hint\: Join fields have incompatible data types. incompatible_types_to_calculate_the_normalization= incorrect= incorrectNumberOfParametersWritten=Number of parameters written is incorrect. incorrectParameter=Invalid parameter. incorrect_annotation_format=Invalid annotation format. incorrect_color= incorrect_coordinate_format=Invalid coordinate format. incorrect_domain=Invalid domain. incorrect_expression=Invalid expression. incorrect_file=Invalid file. incorrect_format_on_date=Invalid data format. incorrect_option=Invalid option. incorrect_path=Invalid path. incorrect_point=Invalid point. incorrect_position= incorrect_size= incorrect_value=Invalid value. increase=Cursor zoom increase_statistics=Increase calculated statistics incremento_overview=Increase overviews generation incremento_recorte=Processing percentage indexar_campos=Index fields inf_der=Lower right info=Information infoCRS=Spatial reference system (SRS) info info_extrusion= info_format_not_supported= info_transformations=Transformation info infobreak= infocrs=Details infodef= informacion=Information informacion_adicional=Additional information informaci\u00f3n= information=Information infovalue= iniciando_proceso=Initializing tool... initial_canvas_warning=
Go to File->Preferences->3D and set Java/Swing compatibility to No.
initial_jcrs_warning=Warning\:
Using a testing version of the JCRS Extension. It may still have critical errors. initial_skin_warning=
Go to File->Preferences->General->Skin and select JdialogSkin or DockingSkin. initial_warning=Warning
This is a development version of gvSIG. It is likely to contain critical errors and even damage files during editing operations.

The latest stable version of gvSIG is recommended for daily work. initial_warning_3D=Warning
The 3D Extension will not work correctly with the current application configuration. To ensure reliable 3D performance, change the following settings\:
input_hist=Input input_output_error=Input/output error. insert=Insert insert_basis_point=Insert base point insert_central_point_or_3p=Insert central point or [3P] insert_central_point_polygon=Insert central point of the polygon insert_column= insert_destination_point=Insert destination point insert_distance_another_axis=Insert distance to other axis insert_factor=Insert scale factor insert_factor_or_reference=Insert scale factor |2| or Reference [R] insert_first_point=Insert first point insert_first_point_corner=Insert first corner point insert_first_point_or_distance=Insert first point or distance insert_first_point_scale=Insert origin of scale line insert_initial_point_axis=Insert initial point of ellipse axis insert_last_point=Insert last point insert_last_point_axis=Insert final point of ellipse axis insert_last_point_reference=Insert end of reference line insert_last_point_scale=Insert end of scale line insert_length_or_point=Insert length or point insert_more_points_or_finish=Insert additional points or finish insert_move_first_point=Insert first point to move insert_move_last_point=Insert second point to move insert_next_point=Insert next point insert_next_point_arc_or_close=Insert next point, Arc [A] or Close [C] insert_next_point_line_or_close=Insert next point, Line [N] or Close [C] insert_next_point_selection_or_end_polygon=Insert next point or End selection polygon [E] insert_number_sides=Insert number of sides insert_opposited_corner=Insert opposite corner insert_point=Insert point insert_point_corner=Insert point of opposite corner insert_point_corner_or_square=Insert point of opposite corner or square [C] insert_point_move=Insert point for move insert_point_or_end=Insert point or End geometry [E] insert_point_selection=Insert selection point insert_point_selection_or_types=Insert point or Circle [IC], Out rect.[OR], Polyg.[IP], Intern. pol.[CP], Out pol.[OP], Intern. circle [CC], Out circle [OC] insert_radius=Insert radius [R] insert_radius_or_second_point=Insert radius or second point insert_reference_point=Insert origin or Reference Line insert_reference_point_or_factor=Insert origin or Reference Line or Scale Factor [F] insert_rotation_angle=Insert rotation angle insert_row=Insert row insert_second_point=Insert second point insert_second_point_angle=Insert second point or angle insert_second_point_move=Insert second point for move insert_second_point_selection=Insert second point of selection rectangle insert_selection_last_point=Insert opposite corner of the selection rectangle insert_selection_point=Insert selection point insert_third_point=Insert third point insertar= insertar_cajetin=Insert grid insertar_capa=Insert layer insertar_circulo=Insert circle insertar_columna=Insert column insertar_en_la_vista_la_capa_creada=Add the new layer to the active view? insertar_escala=Insert scale insertar_fila=Insert row insertar_imagen=Insert image insertar_leyenda=Insert legend insertar_linea=Insert line insertar_localizador=Insert locator insertar_norte=Insert north arrow insertar_poligono=Insert polygon insertar_polilinea=Insert polyline insertar_punto=Insert point insertar_recta= insertar_rectangulo=Insert rectangle insertar_texto=Insert text insertar_vista=Insert view inside_circle=Inside circle inside_polygon=Inside polygon installer.ApplicationReadmeText= installer.Back= installer.Browse= installer.BuildFileText= installer.BuildUninstallText= installer.Cancel= installer.CleanupInstallText= installer.Close= installer.ConsolePause@Message= installer.ConsolePauseQuitText= installer.ConsolePauseText= installer.ConsoleSelectDestinationText= installer.CreateDesktopShortcutText= installer.CreateQuickLaunchShortcutText= installer.CustomInstallDescription= installer.DirectoryNameErrorText= installer.DirectoryPermissionText= installer.DisplayName= installer.DownloadingFilesText= installer.ErrorTitle= installer.ExitText= installer.ExitTitle= installer.FileBeingInstalledText= installer.FileBeingUninstalledText= installer.FileOverwriteText= installer.Finish= installer.GroupBeingInstalledText= installer.GroupBeingUninstalledText= installer.Help= installer.InsertDiscText= installer.InstallApplicationText= installer.InstallCompleteText= installer.InstallErrorText= installer.InstallPrepareText= installer.InstallStartupText= installer.InstallTitleText= installer.InstallationCompleteText= installer.InstallingApplicationText= installer.LaunchApplicationText= installer.LocateJavaRuntime@PromptMessage= installer.LocateJavaRuntime@StatusMessage= installer.Next= installer.No= installer.OK= installer.PasswordIncorrectText= installer.ProgramFilesDescription= installer.PromptForDirectoryMessage= installer.PromptForDirectoryNewFolderText= installer.PromptForDirectoryTitle= installer.PromptForRootText= installer.RequireAdministratorText= installer.RequireRootText= installer.SelectLanguageText= installer.SeparatorText= installer.String.database.entries= installer.String.directories= installer.String.environment.variables= installer.String.files= installer.String.package.entries= installer.String.registry.entries= installer.String.shortcuts= installer.TextWindow@Caption= installer.TextWindow@CloseButton= installer.TextWindow@Message= installer.TextWindow@Title= installer.TypicalInstallDescription= installer.UninstallApplicationText= installer.UninstallCompleteText= installer.UninstallLeftoverText= installer.UninstallPrepareText= installer.UninstallStartupText= installer.UninstallTitleText= installer.UninstallingApplicationText= installer.UnpackingFilesText= installer.UnzipFile@StatusText= installer.UpdateRegistryText= installer.VersionHelpText= installer.ViewReadmeText= installer.Yes= installer.installer.UpdateRegistryText= instead=Instead integer_value= inteligentSearch=Intelligent search inteligentSearchAscii=All word forms inter_arc=Internal arc inter_line=Internal line interleave=Interleave internal_polygon=Internal polygon internal_polygon_=Internal polygon interpolacion=Interpolation interpolado=Interpolated interpolando=Interpolating interpolar= intersection_point=Intersection point interval=Interval intervalo=Interval intervals=Intervals into_circle=Inscribed into_circle_or_circumscribed=Inscribed [I] or Circumscribed [C] in circle |C| intro_tablename=Provide a name for the table to create. Warning\: Any existing table of the same name will be overwritten. intro_tablename_blank=You must enter the name of the table to continue introduce_nombre=Rename to\: introduzca_el_nombre_de_la_nueva_capa_de_anotaciones=Insert a name for the new annotation layer introduzca_intervalo_deseado=Specify desired interval introduzca_nuevo_nombre_para_la_vista=Provide a new name for the view inutilizar= invFlattening=Inverse flattening inv_f=Inverse flattening invalid_coordinate=Invalid coordinate invalid_coordinates=Invalid coordinates. invalid_dimension_values=Invalid dimension values. invalid_filter_expression= invalid_folder_name= invalid_interval_count_value=Invalid number of intervals. invalid_layer=Invalid layer invalid_number=Invalid value. invalid_priority_value=Invalid priority value. invalid_url=Invalid format in WFS server URL. invalid_value_for=Invalid value for invalid_value_for_gap=Invalid value for interval. inversa=Inverse invert_selection=Invert selection invoke=Invoke io_exception= is_editable_TOOLTIP_HTML_explanation=Determines whether a layer is editable.
If it is not, the respective part of the user interface will be disabled. is_required=is required isnt_a_field_of_layer=is not an attribute field of any layer. it_has_established_a_limit_of_rows_will_lose_the_possibility_to_undo_wants_to_continue=Setting a new limit for the number of records will erase the undo history for the current session. Do you want to continue? it_will_not_be_added=It will not be added itemsOrderConfigurationLabel=Ordering jComboBoxConfigurableLookUpByTheUser_frameTitle=Testing component 'JComboBoxConfigurableLookUp'. jComboBoxItemsSeekerConfigurableTestingByTheUser_frameTitle= jOPMessageFileDoesntExists=Source file does not exist jOPMessageFileWithoutReadPermissions=Cannot read source file\: Permission denied. jOPMessageIncorrectFile=The specified source is not a file. join=Join... join_=JOIN join_bevel=Bevel join join_miter=Miter join join_round=Rounded join join_style=Edges jp2=JPEG 2000 (*.jp2) jpg=JPEG (*.jpg, *.jpeg) justOneRecordMessage= justOneRecordTitle= keep_symbol_at_fixed_angle_to_page=Keep symbol at fixed angle to page keep_the_order_of_values=Keep order of values kernel_size= keyWords=Keywords keywords=Keywords kilometre=Kilometers kilometros=Kilometers known_values=Contents la_capa_no_tiene_red_asociada=Layer is not associated with the network label= label-point-priority-help=Priority\: 0=blocked, 1=highest, 3=lowest label_attributes_defined_in_table=Settings from attribute fields label_class_properties=Label class properties label_expression=Label expression label_expression_editor=Label expression editor label_expression_help= label_features_in_the_same_way=Label all features in the same way label_features_in_this_class=Label features in this class\: label_only_when_selected=Label selected features only label_priority=Labeling priority label_style_could_not_be_painted= label_styles=Label styles label_text_in_the_TOC=As displayed in TOC labeled_point= labeling=Labeling labeling_field=Select field labelling_field=Labeling field labelling_using_joined_field=Labeling using a field from join. The labeling will be lost. ladoVentana=Window side landsatETM=Landsat ETM+ landsatMS=Landsat MS landsatTM=Landsat TM language=Language languageRulesConfigurationLabel=Language rules last=Previous lastUpdateDate=Date of last update last_reading=Last reading lat_max=Maximum latitude lat_min=Minimum latitude lateral_buffer= latitud=Latitude latitude_of_center=Latitude of projection center latitude_of_origin=Latitude of origin latitude_of_standar_parallel=Latitude of standard parallel latitude_of_standard_parallel=Latitude of standard parallel layer=Layer\: layerName=Layer name layerType=Geometry type layer_Selector=Layer selector layer_abstract=Layer summary layer_geometry_and_legend_types_are_incompatible= layer_name=Layer name layer_native_projection= layer_not_loaded=No valid layer loaded. Please select a raster layer. layer_not_queriable=Layer cannot be queried. layer_not_queryable=does not accept this kind of query. layer_not_selected=No layer has been selected. layer_scale_status=Status of layer scale limits layer_title=Layer title layer_was_already_added=Layer has already been added. layer_without_georref=Layer is missing georeferencing information.\nWould you like to add it manually? layers=Layers layers_in_other_view=Use existing view layers_in_the_current_view=Layers in the current view layers_not_selected= lbl_SummarizeForm_descripcion1=Summarize table\: Creates a new table which contains a record for each unique value from the "group by" field, plus the selected statistics from the other fields. lbl_SummarizeForm_punto1=1. Choose the "group by" field\: lbl_SummarizeForm_punto2=2. Choose one or more statistics to be \n included in the result table\: lbl_SummarizeForm_punto3=3. Choose the target file\: left=left legend=Legend legend_exception=Legend exception (fatal error). legend_format_not_yet_supported= legend_type_not_yet_supported= legend_using_joined_field=Joined fields are part of symbology for this layer's features. \nWill switch back to basic symbology. length=Length length_field_text=FIeld with length of segment in meters. length_of_field=Length of field level_slice=Level slice levels=Levels leyenda=Legend leyenda_campo_unido=You are using a joined or linked field either in the legend or for the labeling. \nPlease adjust the legend/labeling before removing the join/link. leyendo_raster=Reading input raster data. This may take a while. Please be patient... liberando_recursos=Freeing resources libreria=Scheme like_JTextField=As 'JTextField' limit_rows_in_memory=Memory limites=Limits limits= limpiar=Clear line=Line lineProfile=Profile line lineSideLabel_TOOLTIP_HTML_explanation=Geometries of type "line" lineToPoints_note=Converting lines line_=LINE line_fill=Line fill line_fill_symbol=Line fill line_must_not_self_intersect=No self-intersections (lines) line_not_cross_rectangle= line_properties=Line properties line_settings=Line settings line_style=Line style line_symbols=Line symbols line_type=Line type linea=Line linea_grafica=Border... lineal=Linear lineal_directo=Direct linear lineas=Lines lines=Lines linf_der=Lower right link=Link linkColumn=Web page linkError=Error loading link linkLoad=Load a web resource link_field_of_table=Join field\: link_field_table_to_import=Join field\: ll=Lower left loadWMS=Load WMS data load_buffer_data=Loading data. This may take a while. Please be patient... load_events=Load events... load_from_ascii=Load from CSV file load_from_xml=Load from XML file (.rmf) load_generated_network= load_layer_nodes=New layer from network nodes load_norm_pattern=Load normalization pattern load_parameters=Load parameters load_stages=Load stops... load_text_file=Load text file load_velocities=Load... loading_facilities=Loading facilities loading_layers_please_wait=Loading layers. Please be patient... loadlayer_aplicar=On loading elevation data, apply loadstretch=Create intervals loadsuccess=Pattern loaded OK. loadtree=Load... localizador=Locator localize=Locate location=Location location_along_the_lines=Along lines locked_element=Element locked. \nYou may need to close some document and/or finish editing some layer. locked_element_it_cannot_be_deleted=Element locked. It cannot be deleted.\nYou may need to close some document and/or finish editing some layer. locked_element_it_cannot_be_renamed=Element locked. It cannot be renamed.\nYou may need to close some document and/or finish editing some layer. log=Log log_fusion1=Computing statistics for principal components. This may take a while. Please be patient... log_fusion2=Generating principal components. This may take a while. Please be patient... log_fusion3=Adjusting resolution of panchromatic image. This may take a while. Please be patient... logarithmical=Logarithmic logaritmic=Logarithmic login_exit=Exit login_invalid_user=Invalid user login_name=Name login_ok=Ok login_password=Password logo_URL=Logo URL long=Longitude\: long_max=Maximum longitude long_min=Minimum longitude longitud= longitude_of_center=Longitude of projection center looks_like_too_low_value_for_this_field_may_cause_system_to_run_slow=It seems that one of the values for the field is too low. This may cause the system to slow down and become unresponsive. low=Low lowerCoordinates=Lower lppp= lr=Lower right lsup_izq=Upper left luminosity=Luminosity lyr_selection_text=Layers to include in topology\: lyrs_must_disjoint=Not disjoint from B m/pixel=Meters per pixel magenta= maintain_order= maintain_position=Maintain position majority=Majority make_tfw=Create TFW file\: malformed_or_empty_expression=Invalid or empty expression. malla_activada=Activate grid manage_fields=Manage fields... mantainold=Remove search results mantener_intervalo=Keep interval width on resize manual= map_context_file_error=Web Map Context file error map_extent=Extent map_size_in_pixels=Map size in pixels map_units=Map units mapa=Map mapas=Maps marco=Frame marco_vista=Link to view frame\: margenes=Margins\: marker=Marker marker_fill=Marker fill marker_fill_symbol=Marker fill marker_line=Marker line marker_line_symbol=Marker line marker_style=Shape mas_de_100_simbolos=There are more than 100 unique values. Add all? mascaras=Regions mask=Masking matrix=Matrix matrix_=MATRIX matriz_polar=Polar matrix matriz_rectangular=Rectangular matrix maxFeatures_aviso=Retrieved maximum number of features. You can increase the \namount of features to retrieve by adjusting the "Max. features" \nsetting in the "WFS properties" dialog. max_cost_limit=Maximum cost\: max_facilities_number_higher_zero=Maximum number of facilities must be larger than zero. max_features=Max. features max_length_is=Maximum length is max_no_of_pixels=Maximum number of pixels max_number_of_errors=Maximum number of errors\: max_scale=Maximum scale max_stev_interval_multiplo=Maximum deviation\: maximo=Maximum maximoRGB=RGB maximum maximun_name_size=Maximum name length maxx=Max. X maxy=Max. Y mayor_de=... is above media=Mean media_phase=Media mag/phase median=Median mediana=Average mediante_el_separador=by separator medir_area=Measure area medir_distancias=Measure distances medium=Medium medium_point=Midpoint memoria_excedida=There is not enough memory (RAM) for this operation.\nYou can try to adjust the Java Virtual Machine's memory\noptions or generate a smaller image. memory_usage=Memory usage menor_de=... is below merge=Merge metadata=Metadata metadata_catalog=Geodata search\: Connection metadata_tree=Metadata tree metadatos=Metadata meters=Meters method=Method methods=Methods metodo=Method metodo_maxima_probabilidad=Maximum likelihood metodo_minima_diatancia=Minimum distance metodo_noSupervisado=Unsupervised metodo_paralelepipedos=Parallelepipedon metre=Meters metros=Meters microradian=Microradians mil_6400=Artillery mil miles=Miles miliSeconds=ms. millimeters=Millimeters min_scale=Minimum scale minimo=Minimum minimoRGB=RGB minimum minimum_angle_to_draw= minimum_size_of_line_incorrect=Invalid minimum line size. minority=Minority minutes=Minutes minx=Min. X miny=Min. Y missing_field_to_import=Hint\: Select at least one field to import. missing_fields_to_import_list= missing_table=Missing target table missing_table_field_for_link=Hint\: The join field is missing in the target table. missing_table_to_import=Hint\: Missing source table. missing_table_to_import_field_for_link=Hint\: The join field is missing in the source table. moda=Mode modefilter=Mode filter modificar=modify modification_date=Modification date modified_layer= modify=Modify modify_annotation=Modify annotation modify_filter_expression=Modify filter... monetary=Monetary more_info=More information on selected SRS more_points=The selected polynomial order transformation\nrequires additional control points.\nMinimum number of points\: mosaic=Mosaic... mosaic_process=Processing mosaic mosaico_tooltip=Combines several images into one mosaicos=Mosaic... mostrar_cuadricula=Show grid\: mostrar_descripcion= mostrar_escala_numerica=Show numeric scale mostrar_estadisticas=Show statistics mostrar_leyenda=Show legend\: mostrar_puntos=Show numbers mostrar_rejilla=Show grid mostrar_unidades=Show units move=Move move-point=Move point move_=MOVE move_down=Move down move_down_button_TOOLTIP_HTML_explanation=Move down move_elements=Move elements move_handlers=Move handlers move_image=Move image move_layer_down=Move down move_layer_up=Move up move_up=Move up move_up_button_TOOLTIP_HTML_explanation=Move up msg_cancel_incrementable=Cancel the computation? msg_save_raster=Cancel the operation? msg_set_velocities=Please specify speed for each type of segment (km/h). mts_pixel=Mts/pixel mtspixel=Meters/pixel muestra=Sample muestra_consola_tooltip= muestra_los_elementos_de_la_capa_usando_un_simbolo_por_cada_valor_unico=Create one symbology class for each unique value and assign individual styles muestra_oculta_la_toolbar= multiLayerSelection_checkbox_TOOLTIP_HTML_explanation=Select features from all layers multiLayer_selection=Multilayer selection multiPointSideLabel_TOOLTIP_HTML_explanation=Geometries of type "multipoint" multi_type=Multiple type multiple_atributes=Multiple attributes multiple_value=Multiple value multiples_intervalos=Multiple intervals multipoint=Multipoint multipoint_=MULTIPOINT multipoint_type=Multipoint type must_be_contained_by=Must be contained in one of B must_be_covered_by=Must be covered by one of B must_be_covered_by_all_lyr=Must be covered by one or more of B must_be_equals=Must match identical of B must_be_jts_valid=Must pass JTS validation must_be_larger_than_cluster_tolerance=Must be larger than cluster tolerance (default) must_contains=Must contain at least one of B must_covers=Must cover at least one of B must_cross=Must cross at least one of B must_not_have_dangles=No dangling nodes must_not_have_duplicates=No duplicate geometries must_not_have_gaps=No gaps must_not_have_pseudonodes=No pseudo nodes must_not_have_repeated_points=No duplicate coordinates must_not_overlap=No overlaps in same layer must_not_overlap_with=No overlaps with other layer must_specify_a_file=Please specify a target file. must_touch=Most touch at least one of B n_intervalos=Number of intervals\: nadfile_bad_format=Grid file format not recognized. nadfile_not_found=Grid file not found. nadgrids=NTv2 format grid file nadgrids_file=Grid file name=Name nameDatum=Datum name nameSelectedCrs=SRS name name_of_the_new_property_TOOLTIP_HTML_explanation=Enter the name of the column which will contain
the geometry attribute name_transformation=Transformation name names_and_types_count_are_disctint=Number of fields differs from number of field types natural_intervals=Natural intervals nautic_miles=Nautical miles nautical_mile=Nautical miles navegacion=Navigation navegacion_vista=View frame navigation_table= nbandas=Number of bands nearest_point=Nearest point nearest_point_for_point_layers=Nearest point in a layer necesita_un_tema_activo= necesita_un_tema_vectorial_activo= necesita_una_capa_activa=An active layer is required necesita_una_capa_vectorial_activa=An active vector layer is required net_analyst=Network analysis netpage0_htmltext1=This tool generates a network topology
for a vector line layer netpage0_htmltext2=.
The presence of pseudo nodes can give
unintended results.\n
Select cleaning options\:

new=New... newCRS=User-defined new_class=New class new_dxf=AutoCAD DXF... new_field=Add... new_field_properties=Properties of new field new_file_properties=File location update new_filter_expression=New filter... new_flag=New stop new_folder= new_geoprocess= new_layer=New layer new_layer_name=Name of new layer new_name= new_oracle_spatial_table=Oracle Spatial table... new_osg= new_postgis=PostGIS spatial table... new_property_checkbox_TOOLTIP_HTML_explanation=Selects whether a new column should be created for the attribute,
or an existing one should be used new_register= new_shp=Shapefile... new_style=New style new_table=New table next=Next next_point=Next point next_point_or_end=Next point or end next_previous_add_del_cancel=Point, Next vertex [S], Previous [A], Add [I] or Remove [E] next_transf=Go to next transformation ninguna_capa_seleccionada=No layer selected ninguna_impresora_configurada=No printer set ninguno=None no=No noFilterTooltip= no_activos=Inactive no_acumulado=Not accumulated no_adjust_grid= no_available_destination_lyr=Target layer not available. no_bandas=No bands selected no_capas_cargadas=No layers loaded no_clases=Empty classification. \nPlease create some ROIs first. no_class_assigned=No class assigned no_components=No components selected no_conection_between_arcs= no_data_saved=No parameters to restore.\nSave a parameter set first. no_desc=No description no_driver_escritura=Cannot get driver for writing data. Raster has not been saved. no_es_posible_aplicar_leyenda_vacia=Legend is empty. It will not be applied. no_es_posible_editar_capa_reproyectada=A layer that has been reprojected on-the-fly cannot be edited. Please use the reprojection tool in the geoprocessing toolbox to permanently reproject this layer and make it editable. no_event_selected=No event selected. no_events_network=Network contains no events. no_existe_fichero=File does not exist no_existe_writer_para_este_formato_de_capa_o_no_tiene_permisos_de_escritura_los_datos_no_se_guardaran_desea_continuar=There is not write support for this layer's data format or you do not have write permissions for the output file. Continue? no_expression_defined=Expression not defined. no_facilities_layer_selected=No facilities layer selected. no_file= no_file2= no_filter_area_will_be_applied_in_the_load_of_the_layer=No area filter will be applied when loading the layer. no_filter_will_be_applied_in_the_load_of_the_layer=No filter will be applied when loading the layer. no_hay_campo_seleccionado=No classification field has been selected. no_hay_capas_suficientes_para_esta_regla=This rule requires more than one layer. no_hay_ninguna_capa_seleccionada=No layer has been selected. no_hay_ninguna_capa_seleccionado= no_image_available=Image not available. no_layers_found=No available layers found. no_mostrar_la_capa_cuando_la_escala_sea=Do not show this layer if the view scale ... no_name= no_network_layer=Network layer not found no_points_to_load=No georeferencing data found in this raster's\nmetadata file (RMF). no_puede_abrir_fichero=Cannot open file no_puede_continuar=Cannot continue. no_results=No results found. no_root= no_rows=There are no entries in the points table. no_rows_selected=There are no selected records in the points table. no_se_pegaran_las_tablas=No table has been pasted. no_se_pegaran_las_vistas_del_conflicto=The conflicting views will not be pasted. no_se_puede_borrar_una_capa_en_edicion=Layer cannot be deleted. It is currently in editing mode. no_se_puede_pasar_por_todas_las_paradas=No route through all stops! no_se_pueden_unir_las_geometrias_al_no_estar_en_la_misma_linea= no_selected_points=Cannot center view on point.\nNo point has been selected. no_style=No style no_symbol_especified=No symbol specified no_variables=Expression contains no variables. no_view_found=The selected view is not active.\nPlease select another view. no_visibles=Invisible nodata=No data nodata_modificado_continuar=Default "no data" value will be changed. Continue? node_count=Node count noenhanced= nofield=Select a table field noformatok=Pattern has invalid format nograyscale=Failed to add grayscale filter. noisefilter=Noise filter nolayersinview=No layer in view noload=Loading pattern canceled nombre=Name nombre_capa=Layer name nombre_capas=Layer names nombre_clase=Class name nombre_cobertura=Coverage name nombre_demasiado_largo=Name is too long. nombre_feature= nombre_no_valido=Invalid name. nombre_paleta=Save palette as... nombre_proyeccion=Projection name nombre_sesion=Name nomedian=Failed to add median filter. non_editable= none=none none2=None none_field=(Drop old fields) none_selected=None selected noposterization=Failed to add posterization filter. normal=Normal normalization=Normalize by normalize=Normalization normalizefile=Normalize text file normalizetable=Normalize table field normalizing=Normalizing... normaltertable=Alter table normcancel=Exit normcharacter=Character normcolon=Colon normconsole=Info console normdecimal=Decimal\: normdelimetersnext=Field delimiters normdontimport=Skip import normerrorloadingfile=Error loading file normerrorreadingfile=Error reading file normfielddate=Date normfielddecimal=Decimal normfieldinteger=Integer normfieldname=Field name normfields=New fields normfieldseparators=Separators normfieldsettings=Field settings normfieldstring=String normfieldtype=Field type normfirstnumberrows=rows normfirstrows=Skip first normfixedwidth=Fixed width\: norminfieldseparators=Formatting normjoin=Merge consecutive separators normjoinfield=Preserve\: normload=Load... normnewtable=Create new table normother=Other\: normoutputopt=Output options normrun=Run normsampleout=Sample output normsave=Save... normsemicolon=Semicolon normsource=Data source normspace=Space normtab=Tab normtest=Test run normtextdelimiter=Text\: normthousand=Thousand\: normtitle=Normalization of north=North nosave=Saving pattern canceled not_GVL_save_question=The selected output format is a non-proprietary format and can be used to exchange legends with other applications. \nThe recommended file format for import of legends is GVL. \nHowever, some of the original legend information and style settings may not be preserved. not_admit_azimut_close_to=cannot set azimuth close to not_admit_different_azimut_and_spin_axis=azimuth and angle from rectified to skew grid must be the same. not_admit_latitude_origin_close_to_the_poles=cannot set latitude of origin close to the poles. not_admit_parameter=invalid parameter not_admit_scale_factor_and_latitude_of_origin=cannot set scale factor unequal 1.0 and latitude of origin unequal 0.0. not_available=Not available not_equal_lat_1_and_lat_2=cannot set latitude 1 and 2 to the same value not_geographic_nor_projected=The reference system is neither geographic nor projected. not_in_parameter_list=is not in parameter list. not_in_proj4=is not in PROJ4 database. not_load=Do not load the layer not_possible_modify_this_symbol_correctly=Unable modify this symbol correctly not_save_empty_legend=Cannot save an empty legend. not_valid_token=Invalid token. not_values_90_or_minus_90_lat_2=Latitude 2 cannot be 90.0 or -90.0. not_visible=Invisible not_zero_lat_1=Latitude 1 cannot be 0 (zero). npixeles=Pixel count nueva_libreria=New scheme nueva_libreria_title=New library nuevo=New nuevo_crs=Spatial Reference System (SRS) nuevo_nombre_para_el_mapa=Provide a new name for the layer nuevo_proyecto=New project nuevo_tamano_fuente= nuevo_tooltip=Create a new project num=No num_bandas=Number of bands num_clases=Number of classes num_columnas=Number of columns\: num_elementos=Number of elements\: num_filas=Number of rows\: num_filas_columnas=Rows/columns\: num_lados_insuficiente=Insufficient number of sides. num_overviews=Number of overviews number_of_facilities_to_search=Number to search\: number_of_layers=Number of layers\: number_of_positions=Number of positions number_of_rules=Number of rules\: numclases=Number of classes\: numeric=Numeric numeric_format=This field accepts only numeric characters. numeric_or_boolean_value=Numeric or boolean value numeric_value=Numeric value numero_decimales_mostrar=Decimal places\: numero_incorrecto=Incorrect number. object=Object object_reference_enabled=Enable objects reference objectsCreation=Object creation obteniendo_imagen=Obtaining image... ocultar_estadisticas=Hide statistics ocultardetalles=Hide details odmatrix_control_panel=Origin-destination matrix of=of offline=Disconnected. offset=Offset offset_label=Offset label offset_labels_horizontally=Place labels by priority around points\: offset_labels_on_top_of_the_points=Simply place labels on top of points ogc_mapcontext_file=OGC Web Map Context (*.cml) ok=Ok onSharpening=Activate pansharpening on_the_line=On the line online=Online onlyOneColorOnTextConfigurationLabel=Use single text color only_points_in_file=File must contain only points. only_selection= only_use_the_selected_points=Selected points only opacidad=Opacity opciones=Options opciones_separacion=Spacing options open_file=Open file open_first_time=Show on opening view open_layers_as=View open_navigation_table= open_raw_file=Open RAW file opened_project=Project opened openning_project=Opening project operacion=Operation operacion_cancelada=Operation has been canceled. operadores_jtree=Operators operand=Operand operation=Operation operation_not_allowed_for_SingleLabelingStrategy=Operation not allowed in simple labeling mode. operator= operator_and_explanation=AND operator.\nCalculates set intersection;\nUsed as a logical operator, "A AND B " returns "true" \nif both "A" and "B" are true. operator_distinct_explanation=NOT EQUAL operator.\nFilters out those records for which the value \nin the field on the left-hand side is\nnot equal to the right-hand side value. operator_equal_explanation=EQUAL operator.\nFilters out those records for which the value \nin the field on the left-hand side is\nequal to the right-hand side value. operator_equal_greater_explanation=GREATER OR EQUAL operator.\nFilters out those records for which the value \nin the field on the left-hand side is\ngreater than or equal to the right-hand side value. operator_equal_smaller_explanation=SMALLER OR EQUAL operator.\nFilters out those records for which the value \nin the field on the left-hand side is\nsmaller than or equal to the right-hand side value. operator_greater_explanation=GREATER THAN operator.\nFilters out those records for which the value \nin the field on the left-hand side is\ngreater than the value on the right-hand side. operator_not_explanation=NOT operator.\nCalculates set complement;\nUsed as a logical operator, "NOT A " returns "true" \nif "A" is false and vice versa. operator_or_explanation=OR operator.\nCalculates set union;\nUsed as a logical operator, "A OR B " returns "true" \nif either "A" or "B" is true and returns "false" if both\nare false . operator_smaller_explanation=SMALLER THAN operator.\nFilters out those records for which the value \nin the field on the left-hand side is\nsmaller than the value on the right-hand side. operators=Operators optimization_tolerance=Optimization tolerance optinos.network.click_to_test_connection=Press "Check now" to test the connection. optional=Optional options=Options options.annotations= options.configuration.screen=Screen options.editing.default_axis_references_color=Reference axis color options.editing.default_handler_color=Selection handle color options.editing.default_rectangle_selection_color=Selection rectangle color options.editing.default_selection_color=Selection color options.firewall.http.enabled=Use HTTP proxy server options.firewall.http.host=HTTP proxy server options.firewall.http.incorrect_host=Invalid HTTP host options.firewall.http.nonProxy=Connect directly to options.firewall.http.password=Password options.firewall.http.port=HTTP proxy port options.firewall.http.user=User name options.firewall.socks.enabled=Use SOCKS proxy server options.firewall.socks.host=SOCKS proxy host options.firewall.socks.incorrect_host=Invalid SOCKS host options.firewall.socks.port=SOCKS proxy port options.foldering.data_folder=Spatial data options.foldering.projects_folder=Project files options.foldering.symbol_library_folder=Symbols options.foldering.template_folder=Templates options.foldering.title=Default directories options.general.backup_project_to_be_overwriten=Always create backup copy of project file options.general.browser.select_a_known_browser=Select a web browser\: options.general.browser.specify_a_command=Use a custom command\:
E.g.\: firefox %url
(where %url is the address of
the web page to open). options.general.remember_windows_pos=Remember window positions options.general.remember_windows_size=Remember window dimensions options.general.select_theme=User interface theme (restart to activate)\: options.layout.paper_properties.landscaped=Landscape options.layout.paper_properties.paper_direction=Paper orientation options.layout.paper_properties.portrait=Portrait options.layout.paper_properties.title=Properties and size of paper options.network.click_to_test_connection=Press button to test the connection options.network.status=Network status\: options.paper_properties.title= options.view.behavior.screen_refresh_rate.help=Explanation\: Increasing the screen refresh rate will improve user interface responsiveness, especially when zooming or panning. This option can also be interesting for data editing. Screen refreshing consumes CPU time. The higher the refresh rate, the more processing time is dedicated to updating the screen. options.view.behavior.screen_refreshrate=Screen refresh rate options.view.behavior.screen_refreshrate.full=(immediate redrawing) High options.view.behavior.screen_refreshrate.half=Medium options.view.behavior.screen_refreshrate.none=Low (delayed redrawing) options.view.default_map_overview_back_color=Default locator background color options.view.default_selection_color=Default selection color and opacity\: options.view.default_view_back_color=Default background color\: options.view.invisible_new_layers=Set newly added layers invisible options.view.keep_scale_on_resizing=Maintain scale when resizing oracle_spatial=Oracle Spatial... order_stops=Visit in listed order ordered= orientacion=In direction of\: orientation=Orientation orientation_system=Orientation\: origen=Origin origen_de_datos=Datasource origin=Origin origin_layer= others=Others otras_opciones=Options otro_simbolo=Other symbol otros=Others out_beyond=... out beyond out_circle=Outside of circle out_of_domain=Outside of domain. out_of_the_network=outside the network out_pixel_size=Output pixel size out_polygon=Outside of polygon out_rectangle=Outside of rectangle outline=Outline outline_color=Outline color outline_opacity=Outline opacity outline_width=Outline width outputType=Data type output_file=Output file output_file_too_big=Output file is too big. \nAdjust resolution and size settings. output_file_too_big_jpeg2000=Output file is too big for JPEG2000 format. \nAdjust resolution and size settings. output_header_format=Output header format output_hist=Output output_options=Output options output_quantization=Output quantization outputscale=Output scale\: over_write= overlap=Overlap overlay=Overlay image overviews=Overviews overviews_generating=Generating overview pyramids... overwrite_current_vector_error=Overwrite existing error vectors overwrite_selected_file_confirmation=Selected file exists. Overwrite it? owner=Owner page=Page pagina_atras= pagina_delante= paginas_grupo=Pages per group paint=Draw result panel_adding_exception=Error adding layer\: panel_base_exception=Error loading %(PANEL_LABEL)%(CAUSE_MESSAGE). panel_loading_exception=Error loading layer\: panel_preview_not_available=Preview not available for this panel. panel_without_preferred_size_defined_exception=Labeling panel %(PANEL_LABEL) without default dimensions. pansharp=Pansharpening parallel=Parallel parameter=Parameter parameters=Parameters parametros=Parameters parenthesis_explanation=Add parentheses to group operations. parse_expresion_error=Expression parser error. parsingpatternxml=Reading normalization pattern parte1=Part 1 parte2=Part 2 pasoalto=High-pass pasobajo=Low-pass password=Password paste=Paste paste_= paste_elements=Paste elements paste_feature_= paste_features= paste_selected_geometries_from_other_layer= path=Path path_not_valid=Path not valid pattern=Syntax pattern_norm_file=Normalization Pattern (*.xml) pausar=Pause pc=Principal components pdf=Portable Document Format (*.pdf) pdf_viewer= pedir_coordenadas_georreferenciacion=Ask for coordinates when a raster without georeferencing is loaded pegar=Paste pegar_mapas=Paste maps pegar_vistas=Paste views percentage=Percentage perfiles_imagen=Image profile period=Period permitir_extent_distintos=Allow different sizes perpedicular=Perpendicular perpendicular_point=Perpendicular point personalizado=Custom personalizar_margenes=Customized photometric=Color space picture_file=Picture file picture_fill=Picture fill picture_fill_symbol=Picture fill picture_line_symbol=Picture line picture_marker=Picture marker picture_marker_symbol=Picture marker pie_legend= pie_properties= piechart_3D= piechart_3D_legend_desc= pila_de_comandos=Command stack... piloto_de_redes=Network Pilot pinta_punts_capturats=Plot readings pixel_height=Pixel height pixel_point=Pixel point pixel_width=Pixel width pixeles=Pixels pixels=Pixels place_one_label_per_feature=Place one label per feature place_one_label_per_feature_part=Place one label per feature part placement=Placement placement_priorities_selector=Select placement priority placement_properties=Placement properties plantilla=Template (*.gvt) please_check_them_or_increase_tolerance= please_insert_new_field_name=Please provide new field name. please_introduce_some_costs=Please provide cost values for all stops. plegar_despl=Advanced pluginNotFound=There is no extension registered to handle this type of resource. pluginNotFoundTitle=Layer loading png=Portable Network Graphics (*.png) point=Point pointSideLabel_TOOLTIP_HTML_explanation=Geometries of type "point" point_=POINT point_not_on_the_network=Point is not on the network.\nPlace it closer to a node or line segment. point_settings=Point settings point_symbols=Marker symbols point_type=Point type points=Points points_must_not_overlap=Points must not coincide points_panel=Ground control points (GCP) policy=Policy poligono=Polygon poligonos=Polygons polilinea=polyline poly_order=Order polygon=Polygon polygonSideLabel_TOOLTIP_HTML_explanation=Geometries of type "polygon" polygon_=POLYGON polygon_must_be_closed=No open polygons polygon_must_not_self_intersect=No self-intersections (polygons) polygon_settings=Polygon settings polygon_symbols=Polygon symbols polygon_type=Polygon type polyline=Polyline polyline_=POLYLINE polynomial_algorithm=Polynomial transformation poner_capas_a=Set layer as poner_temas_a= por_area=By area por_codigo=By code por_debajo_de=below\: por_defecto=Use default por_encima_de=above\: por_nombre=By name porarea=Area\: porroi=Regions of interest (ROI)\: port=Port port_in_use=This port is already in use by another user or application.\nPlease close any programs that may be using it and retry. posicion_linea=Position position=Position position_out_of_valid_limits=Position outside of valid limits. position_precision=Locational precision postcode=Postcode posterization=Posterization postgis=PostGIS spatial table... postgisColumn=PostGIS postgisError=Database loading error. postgisLoad=Loading PostGIS potrace=Potrace(TM) bitmap tracing potracelines=Potrace parameters pow=Square precision=Precision\: predefinidas= pref.appearance=Appearance pref.general=General pref.network=Network pref.network.firewall=Firewall/proxy pref_change_folder=Browse... pref_dialog_forder=Select directory for storing patterns pref_normalization=Normalization pref_path_folder=Path\: pref_title_folder=Normalization patterns directory prefer_top_right_all_allowed=Preferably in the upper right corner, but all positions are allowed. preference_cache_warning=
Warning\: Only change settings below if you know what you are doing.
preference_edit=You can amend the list with new address elements preference_file=Address Elements preference_location=File location preferences= preferences.foldering.data_folder= preferences.foldering.template_folder= preferences.foldering.title= preferencias=Preferences... preparando_entrada=Preparing input data... preparar_pagina=Page setup... presentacion=Publication prev=Previous prev_zoom=Previous zoom preview=Preview preview_chart= preview_not_available=No preview. previous=Previous previous_area=Previous area previous_selection=Previous selection previsualizacion=Preview previsualizar_automaticamente_raster=Automatically preview changes of raster properties prewitt=Prewitt primeMeridian=Prime meridian primem=Primem primera_pagina= primero=First principal_component=Principal components principal_components=Principal components principal_components_calculus=Compute image prioridad=Priority problem_loading_fields_of_the_layer=Problem loading layer's attribute fields. problem_loading_layers=Problem loading layers. problem_with_the_new_calculated_area=Problem with the new calculated area. problem_with_wkt_try_manually=Problem parsing WKT projection string. Please set SRS manually. problems_encountered_while_importing=Problems encountered while importing procesando=Processing... procesar=Process proceso_georreferenciacion=Georeferencing tool process=Process process_raster=Processing tools process_tip=Processes the GCPs and assigns a temporal extent to the images profile=Image profile progressive=Progressive proj4Chain=PROJ4 string proj_options=Projection options projcs=PROJCS projected=Projected projection=Projection proofs=Samples properties=Properties propertiesNameWindow=Window properties property=Property propiedad=Property propiedades=Properties... propiedades_cajetin=Grid properties propiedades_capa=Layer properties propiedades_de_la_capa=Layer properties propiedades_del_tema= propiedades_grafico=Object properties propiedades_mapa=Map properties propiedades_marco_imagenes=Object properties propiedades_marco_leyenda=Legend frame properties propiedades_marco_localizador=Locator frame properties propiedades_marco_vista=View frame properties propiedades_raster=Raster properties... propiedades_sesion=Session propiedades_tabla=Table properties propiedades_tema= propiedades_vista=View properties proporcion_overviews=Ratio proportional_symbols=Proportional symbols props=Properties protocolsGroup=Protocols provider=Provider proyeccion_actual=Current projection\: prueba_conexion= ps=Postscript (*.ps) pseudo_standard_parallel_1=Pseudo standard parallel puerto=Port punto=Point punto_causante=Associated point puntos=Points purpose=Purpose put_a_layer_of_topology_in_edition_mode=Start editing a layer in a topology group first put_barrier=Place barrier put_flag_on_arc=Place stop on a segment put_flag_on_node=Place stop on a node put_turncost=Place turn cost pwd= px=Pixel ratio X py=Pixel ratio Y python=Python Script (*.py) quadrant_point=Quadrant point quantile_intervals=Quantile intervals quantities=Quantities quantity_by_category=Quantities by category queryIsNull=Query returned "Null" (no data). quick_information=Quick info quiere_continuar=Would you like to continue? quitar=Remove quitar_enlaces=Remove links quitar_uniones=Remove joins radian=Radians radio=Radio radiometricos=Radiometric enhancement rampa=Gradient random=Random range_wrong=Wrong value range.\n rango_de_escalas=Scale range rangox=X range\: rangoy=Y range\: raster=Raster raster_error_file_exists=File exists. Overwrite it? raster_export=Export image raster_layer=Raster layer raster_not_created=Resampled result raster has not yet been generated.\nApply the transformation first. rasterizando=Rasterizing... realce=Enhancement realces=Enhancements realizando_degradado=Computing gradient... realmente_desea_guardar=Would you like to save? realmente_desea_guardar_la_capa=Save edits for layer reanudar=Resume reason=Reason recalc_stats=Recalculate statistics recargar=Reload recents_transformation=Recent transformations recientes=Recent reconnection_error=Error while reconnecting. recorte=Clipping... recorte_colas=Tail trimming recorte_de_colas=Tail trimming (%) recorte_vista=Clip to view recovering_fields= recovering_recordset=Recovering recordset... recta= rectangle=Rectangle rectangle_=RECTANGLE rectangular=Rectangular rectangulo=Rectangle rectified_grid_angle=Angle from rectified to skew grid recuento=Recount red=Red redes=Networks redo=Redo redo_error=Error while accessing drivers to redo command. reference=Reference reference_system=Reference system referencing_vectorial_layers=Spatial adjustment of vector layers refrescar=Refresh refresh_capabilities=Refresh cache refresh_capabilities_tooltip=Activate this option to overwrite previous data regionalpha=Transparency regiones_interes=Regions of interest regiones_interes_chart=Regions of interest from chart registro=Register\: registros= registros_seleccionados_total=Total records selected rehacer=Redo rejected_facilities_out_of_network=Facilities rejected. They are outside the network. rejected_facility_out_of_network=Facility rejected. It is outside the network. rellenar_marco_vista=Fill view frame relleno=Fill\: reload_button_TOOLTIP_HTML_explanation=Reset this dialog remane_class=Rename class remote_sensing=Remote sensing remove=Remove remove_all=Remove all remove_all_button_TOOLTIP_HTML_explanation=Remove all remove_annotation_overlapping=Remove overlapping labels remove_column= remove_duplicate_labels=Remove duplicate labels remove_elements=Remove elements remove_event=Delete event remove_fields=Remove fields remove_folder= remove_geometry=Remove geometry remove_row=Remove row remove_rows=Remove rows remove_selected_button_TOOLTIP_HTML_explanation=Remove selected rename_field=Rename... renombrar=Rename... repeated_layer_was_not_added=Layer was not added more than once. repository=Repository reproject=Reproject raster into view's projection reprojecting=Reprojecting... reproyectar_aviso=The layer's projection is not the same as the view's projection.\nWarning\: This can produce inaccuracies with some transformations.\nPlease consult appropriate documentation. reproyectar_pregunta=Do you want to reproject? reset=Reset reset_transf=Reset transformation resolucion= resolucion_espacial=Resolution resolucion_resultado=Output resolution\: resolution=Screen density (DPI) resourceLinkColumn=Link resourceShowColumn=Show resourceTypeColumn=Type respuesta_error_servidor= restablecer=Restore resto_valores=Other values restore= restore_defaults=Restore option defaults restore_palette=Dock restrictArea=Restrict search area resultOf=Result of results=Results resutsByPage=Results per page retry=Retry return=Return return_to_origin=Return to first stop returns=Returns reverseDigitizedDirection="Inverse digitized direction"\: rgbtocmyk=RGB to CMYK rgbtohsl=RGB to HSL right=Right roberts=Roberts rois=ROIs rois_needed=Note\: This filter can only be applied to ROIs.
Please use the "Regions of interest" tool to define at least one. rootName=Root root_in= rotX=Rotation around X-axis rotY=Rotation around Y-axis rotate=Rotate rotate_=ROTATE rotate_symbol_to_follow_line_angle=Rotate to follow line slope rotation=Rotation rotation_field=Rotation field rotation_height=Rotation field rotation_manipulator= route_control_panel=Manage route route_from_the_event=

Find route from

the event

route_report_title= route_to_the_event=Find route to

the event rows=Rows\: rrd=Overviews (RRD) ruta=Path rutas=Paths rx=Rotate X ry=Rotate Y salida=Result salida_raster=Result raster salir=Exit salir_tooltip=Exit salvando= salvando_bloque=Saving block salvando_imagen=Saving image... salvando_raster=Save to raster salvar=Save... salvar_como=Save As salvar_raster=Save as georeferenced raster salvar_raster_geo=Grab from view... salvar_rois=Save ROIs to shapefile salvar_transf=Save transformation satellite_height=Satellite height saturation=Saturation save=Save... saveButtonTooltip= save_changes_TOOLTIP_HTML_explanation=Save changes save_color_interpretation= save_error=Error saving save_events=Save events... save_gcp_to_xml=Save to XML file (.rmf) save_layer_osg= save_net_file_in=Save to file\: save_norm_pattern=Save normalization pattern save_parameters=Save parameters save_resources=Save resources save_route=Save route... save_selected_resources_and_exit=Save selected resources and exit save_stages=Save stops... save_to_ascii=Save to CSV file save_to_xml=Save to XML file (*.grf) save_velocities=Save... saveas=Save as... savesuccess=Pattern saved OK. savetree=Save... saving_jp2= savingpat=Saving normalization pattern scale=Scale scaleAny=Any scaleI=> 1,000,000 scaleII=1,000,000 - 250,000 scaleIII=250,000 - 50,000 scaleIV=50,000 - 10,000 scaleV=10,000 - 5000 scaleVI=< 5,000 scale_=SCALE scale_factor=Scale factor scale_limits=Scale limits scale_limits_status=Scale limits status scale_panel=Scale scale_range_window_title=Scale range scaling=Scale schema=Schema script_sep= se_han_producido_los_siguientes_errores_durante_la_carga_de_las_capas=The following errors were encountered while loading layers. se_perdera_la_union= se_perdera_la_uni\u00c3\u00b3n= se_perdera_la_uni\u00f3n=Join will be dropped from attribute table. se_van_a_guardar_=Will save\: searchButton=Search searchConfigurationLabel= searchRadius=Search radius search_results=Search results seconds=Seconds selec= seleccion=Selection seleccion_alpha=Transparency setting seleccion_banda=Bands selection seleccion_bandas=Bands seleccion_campos= seleccion_color=Color selection seleccion_compleja=Complex selection seleccion_componente=Components selection seleccion_de_campos=Field selection seleccion_fuente=Font selection seleccion_imagenes=Layer selection seleccion_metodo=Selection method seleccion_nadgrids=Datum shift selecciona_sistema_de_referencia=Select reference system seleccionar=Select... seleccionarRejilla=Select grid seleccionar_CRS=Select SRS seleccionar_capas=Layer selection seleccionar_capas_raster=Select raster layers seleccionar_coberturas=Select coverages seleccionar_crs=Select SRS seleccionar_directorio=Choose... seleccionar_fichero=Select file seleccionar_formato=Select format seleccionar_parametros=Select parameters seleccionar_por_poligono=Select by polygon seleccionar_por_punto=Select by point seleccionar_por_rectangulo=Select by rectangle seleccionar_puntos= seleccionar_srs=Spatial reference system seleccionar_tiempo=Select time position seleccionar_todos=Select all seleccione_campo_enlace=Field to use for link\: seleccione_crs_capa=Select SRS for layer seleccione_crs_vista=Select SRS for view seleccione_el_campo_angulo_de_la_capa_de_anotaciones=Rotation field\: seleccione_el_campo_color_de_la_capa_de_anotaciones=Color field\: seleccione_el_campo_de_texto_que_desea_que_se_utilize_para_mostrar_la_nueva_capa=Field to use for labeling\: seleccione_el_campo_de_texto_que_desea_que_se_utilize_para_mostrar_la_nueva_capa_virtual=Choose the text field whose contents should be used for labeling in the new virtual layer. seleccione_el_campo_fuente_de_la_capa_de_anotaciones=Font field\: seleccione_el_campo_tamano_de_la_capa_de_anotaciones=Height field\: seleccione_fecha=Select date... seleccione_tabla=Select table seleccione_tabla_a_enlazar=Table to link from\:\: seleccione_tabla_origen=Table to link into\: seleccione_transformacion=Select transformation select=Select... selectAComponent=Select a component selectAMethod=Select an operation selectAnItemWhenLosesFocusConfigurationLabel= selectBandaRefinado=Panchromatic band selection selectCheckBox= selectROI=Edit regions of interest... select_Feature_Reference_System=Select reference system for layer select_a_color_scheme=Select a color scheme select_a_line_layer_in_toc=Please select a line vector layer first. select_a_tool=Select a tool select_a_topology_in_toc=Please select a topology from TOC first. select_all=Select all select_all_info=Select all select_all_resources=Select all resources select_area=Select area to search select_by_area=Filter by area select_by_buffer=Select by buffer zone select_by_buffer_info=Select those features from the view's
active vector layers that intersect
with a buffer zone created around previously selected features. select_by_circle=Select by circle select_by_circle_info=Select those features from the view's
active vector layers that intersect
with a user-defined circle. select_by_polyline=Select by polyline select_by_polyline_info=Select those features from the view's
active vector layers that intersect
with a user-defined polyline. select_by_vertexes_coordinates=Select by vertex coordinates select_charset_for_writing=Select character set for writing select_color=Select color select_coordinates_manually=Enter coordinates manually select_coordinates_using_view=Pick coordinates from view select_driver=Select driver select_duplicates= select_encoding=Select character encoding select_features=Layer selection select_fields=Select layer attribute fields select_formats=Format select_from_point=Select from point select_geom_field=Select geometry storage field select_geometric_info=Select geometry information select_geometric_properties_to_add_TOOLTIP_HTML_explanation=Select geometric properties to add select_geometry=Select a geometry select_geometry_to_extend=Select geometry to extend select_geometry_to_simplify=Select geometry to simplify first select_geometry_to_smooth=Select geometry to smooth first select_geometry_to_split=Select geometries to split select_geometry_type=Select geometry type select_handlers=Select handlers select_how_add_each_geometric_property_TOOLTIP_HTML_explanation=Choose how each geometric property will be added select_image_geometry=Raster geometry selection select_lateral= select_layer_and_fields=Select layer and fields select_layers=Layer selection select_length_field=Length (m) select_none=Remove all select_one_row=Please select a row with a filter expression first. select_other_geometry=Select another geometry select_other_geometry_or_end=Select another geometry or End[E] select_proj=Select projection select_resources_to_save_before_exit=The selected resources will be saved before exiting the application select_rgb=Pick RGB from view select_route_show_instructions=Please select a route to get directions for. select_route_to_draw=Please select a route to draw. select_route_to_zoom=Please select a route to zoom to. select_rows=Select rows select_sense_field=Direction select_street_route_field_name=Field for route labels (e.g. names of streets)\: select_tool=Select from view select_type_field=Type select_unique_field=Select unique field select_zoom_area=Zoom to select area selectarea=Selection selectedCheckBox= selected_dimensions=Selected dimensions selected_from_list=Selected from list selected_layer=Snap to layer selected_layers=Selected layers selected_parameters=Selected parameters selected_themes=Selected themes selectfromview=Select a point in view selection=Selection selectionButtonTooltip= selection_=SELECTION selection_color=Selection color selection_picture_file=For selected features selection_up=Move selection to top semMay=Semi-major axis semMen=Semi-minor axis semantic_expresion_error=Semantic error in expression. semiMajorAxis=Semi-major axis semi_major=Semi-major axis semi_minor=Semi-minor axis semicolon=Semicolon sense_field_text=Field with segment direction; provide the values \nthat represent travel in or against digitizing direction \nin the respective fields below separador= separation=Separation separator=Separator sepatator_info=User-defined separator character or string sepatator_info_coma=Separator character "," sepatator_info_other=Other character or string sepatator_info_semicolon=Separator character ";" server=Server serverReply=Server reply\: serverURL=Address of catalog server\: serverURLCat=Provide address of gazetteer server server_abstract=Server summary server_cant_render_layers=This server cannot render these layers simultaneously.\nTry issuing separate requests, one for each layer. server_doesnt_support_selected_image_format=Server does not support selected image format. server_has_no_services=Server provides no services. server_provides_no_srs__scale_data_may_be_wrong=Server provides no SRS. Scale information might be inaccurate. server_timeout=Server time-out. server_title=Server title server_type=Server type server_url=Server URL or IP server_version=Server version service=Service service_area_control_panel= service_does_not_exist=Service not available service_info=Service information service_name=Service name service_type=Service type service_type_not_supported=Service type not supported by client. servicename_selection_mode=Selection of name for service services= servidor= servidor_wcs_no_responde= set=Set setGeomInfo_=SET_GEOMETRIC_INFO set_Max_Number_Of_Features_Will_Be_Loaded=Set maximum number of features to load set_TimeOut_Explanation=Set server time-out threshold (in milliseconds) set_encoding_to_dbf=Assign encoding set_encoding_to_dbf_files=Assign DBF encoding... set_forbidden_precedence=Set to "blocked" set_high_precedence=Set to "high" priority set_low_precedence=Set to "low" priority set_normal_precedence=Set to "normal" priority set_source_flag=Set origin point set_velocities=Set speeds... setting_up_event_queue= settings=Settings settings_editor=Settings editor sexagesimal_DM=Sexagesimal deg.minfrac sexagesimal_DMS=Sexagesimal deg.min.secfrac sexagesimal_DMS.s=Sexagesimal deg.min.secfrac shape_seleccion= shape_type_error=Shape type error. shape_type_not_yet_supported=Shape type no yet supported. sharpen=Sharpen shortest_path_not_found=Could not determine shortest path. shortestpath=Shortest path show= showAllItemsInListBoxConfigurationLabel=Show all items show_3Dview=3D View show_grid= show_layer_ids=Show layer IDs show_layer_names=Show datasource names show_number=Plot control point number show_this_dialog_next_startup=Show this dialog on next startup shows_the_elements_of_the_layer_depending_on_the_value_of_a_filter_expression=Build symbology classes using filter expressions and assign individual styles to them shp=Shapefile... shp_files=Shapefiles (.shp) si=Yes sideLabel_TOOLTIP_HTML_explanation=Choose the mode for buffer zone selection depending on layer type sideLong=Window side siempre=Always signal_strength=Signal strength siguiente=Next simbolo=Symbol simple=Simple simple_fill=Simple fill simple_fill_symbol=Simple fill simple_labeling= simple_line=Simple line simple_marker=Simple marker simple_marker_symbol=Simple marker simple_text_symbol=Simple text symbol simplificar= simplificar_leyenda=Ungroup legend simplify=Simplify simplify_geometry=Simplify geometry sin_logo=No logo sin_realce=No enhancement sin_titulo=Untitled sin_transformacion=No transformation sincronizar_color_borde_relleno=Harmonize colors for stroke and fill\: single_labeling=Simple labeling single_labeling_setup=Simple labeling setup single_value=Single value sintaxis_error=Syntax error. Please revise expression. size=Size skin=Skin skin_label=Select a skin for the user interface's look and feel\: skin_message=The application must be restarted before changes will take effect. skipped_symbol_changed_for_layer=Symbology changes ignored for layer smooth_geometry=Smooth geometry sobel=Sobel sobre_la_barra=On the scale bar sobreescribir_datos_overview=Generating overviews may permanently change the
original dataset, depending on its format. Continue? sobreescribir_overviews=The image already has overviews.
Overwrite them? sobreescribir_puntos=This operation will update all control points\nin the raster's metadata file. Continue? solo_visualizacion=Show in current view solucion_no_valida=Invalid route. some_arguments_are_incorrect=Some options are incorrect sorter=Sorted source_crs=Source SRS source_too_big=Source layer is too big. Continue? spatial_adjust_warning=Spatial adjustment warning specifies_the_limit_rows_in_memory_when_the_program_eval_the_expresion=Specifies the limit for records to be kept in memory while evaluating expressions. Low values conserve memory but drastically reduce evaluation speed. specifies_the_limit_rows_in_memory_when_the_program_eval_the_expression=Specifies the limit for records to be kept in memory while evaluating expressions. Low values conserve memory but drastically reduce evaluation speed. specifies_the_minimum_size_of_the_lines_that_will_form_the_curves=Controls minimum length of line segments to be used when approximating curves. specify_table_settings=Layer settings specify_the_range_of_scales_at_which_labels_will_be_shown=Set the scale range within which labels will be drawn spheriod= spheriod= spheroid=Spheroid splain= spline= split_geometry=Split geometries split_geometry_shell=SPLIT_GEOMETRIES split_lines= sql_restriction=SQL restriction\: square=Square square_root=Square root src_proj=Source projection srs=SRS stage=Stop standard=Standard standard_parallel_1=Standard parallel 1 standard_parallel_2=Standard parallel 2 startConfigurationLabel= start_edition=Start editing start_save=Please select a rectangular area in the view. startprocess=Start normalization... state_or_province=State/province statistics=Statistics statistics_generation=Generating statistics... stats=Statistics status=Status stop_editing_close=Close the dialog, finish edition and lost changes. stop_editing_message=You are going to finish an edition of a layer that don't has writer. If you continue, you will lose the changes unless you export the layer to another format. What do you want to do? stop_edition=Stop editing stretch=Stretch stretch_=STRETCH string=String string_value=String value style=Style style_library=Style library style_selector=Style selection suavizado=Smooth subir=Up sum_field_values_size= suma=Sum sup_izq=Upper left suprimir_objetos_origen=Remove objects from source ([Y]es or [N]o)? symbol=Symbol... symbol_field=Symbol field symbol_levels=Symbol levels... symbol_library=Symbol library symbol_property_editor=Symbol properties editor symbol_selector=Symbol selection symbol_shapetype_mismatch= symbology=Symbology symmetry=Symmetry symmetry_=SYMMETRY syntax_error=Syntax error s\u00c3\u00admbolo= s\u00edmbolo=Symbol tabbox_manipulator= tabinterpolated_color=Color tabla=Table tabla_actual=Current table tabla_color=Color table tablas=Tables tablas_color=Color table table=Table table_already_exists_in_database=There's already a table with that name in the specified database table_events_column_description=Description table_fields=Fields table_not_create= table_not_initialize=Table not initialized table_solution_column_cost=Cost table_solution_column_description=Description table_solution_column_facilities_position=Facility location table_summarize=Summarize table table_to_import=Table to import\: tag=tag tail_trim= tamPixX=Horizontal pixel size (X) tamPixY=Vertical pixel size (Y) tamanio_celda=Cell size\: tamano=Size\: tamano_intervalo=Interval size tamano_metros=Size in meters tamano_pagina=Page size tamano_posicion=Size and position... tamanyo=Size tamanyo_borde=Border width\: tamanyo_celda=Cell size tamanyo_fuente=Font size\: tamanyo_pagina=Page size tangent_point=Tangent point tarea_en_progreso=Computation in progress... target_crs=Target SRS tasseled_cap=Tasseled cap tasseledcap=Tasseled cap teclas=Keys telephone=Telephone tema= template=Template\: temporales=Temporary files terminar=Finish terminar_edicion=Stop editing terminate=Finish test=Test testJComboBoxConfigurableLookUpErrorMessage=Execution error in component 'JComboBoxConfigurableLookUp'. testJComboBoxItemsSeekerErrorMessage= testJComboBoxItemsSeekerErrorTitle= test_TableFilterQueryJPanel_title=Test 'TableFilterQueryJPanel' test_georef=Apply test_measure=Sample measure test_now=Check now test_of_AreaMapControlPanel= text=Text text_color=Text and markings text_field=Text\: text_fields=Text fields text_height_field=Text height field text_preview_text=Preview text_string=Text\: text_symbol=Text symbol\: text_symbols=Text symbols texto=Text tfw=World file (TFW) tfw_load=Load georeferencing data from file tga=TGA files the\ size\ for\ the\ symbol\ is\ equal\ to\ NaN== the\ size\ for\ the\ symbol\ is\ equal\ to\ NaN\= the_field_name_is_required=Field name is required. the_file=The file the_legend_will_not_be_applied=The legend will not be applied the_length_of_the_line_above_is=The length of the line shown above is the_number_or_arguments_is_incorrect=Wrong number of arguments. the_panel=the panel the_parameter=The parameter the_projection=The projection the_result_is_not_a_boolean_value=Result is not a boolean (i.e. 'false/0' or 'true/1') value. the_scale=Scale the_token=Token the_user_cannot_edit_the_project_because_it_has_not_write_permissions=Project cannot be edited because you have no write permission for the project file. theme= there_are_points_outside_the_tolerance= there_is_no_layer_loaded_in_the_active_view=The active view has no layer loaded into it. these_records_are_out_from_network= this_layer_is_not_self_editable=Warning\: This is a read-only layer. Edited data must be exported to a new layer. It cannot be written back to the original layer! this_layer_was_already_added=This layer has already been added. this_project_is_a_previous_version=This project file was generated by an older version of gvSIG.\nThe next time it is saved by this version of gvSIG, it will irreversibly be updated to the new format.\nThis will most likely render it unreadable by older versions of gvSIG.\nTo avoid losing the original format, use "Save as..." to generate a new copy of this project file. this_table_is_not_self_editable=Table not editable (read-only). threshold=Threshold tiempo_transcurrido=Elapsed time tif=TIFF image files tile_tooltip= time=Time timeout=Time-out tipo=Type tipo_calculo= tipo_dato=Data type tipo_de_intervalo=Interval type\: tipo_de_leyenda=Legend type tipo_fichero_proyecto=GvSIG Project (*.gvp) tipo_leyenda= tipo_linea=Stroke\: tipo_relleno=Fill\: tipo_simbolo=Symbol type\: tipos_de_documentos=Document types title=Title\: title_cancel_incrementable=Confirmation title_summarize=Summarize table titulo=Project manager titulo_confirmar= titulo_consola=Information console titulo_fframetext=Title titulo_vista=View title tmp_nodes_will_be_deleted= to=To toForceSelectAnItemConfigurationLabel=Force item selection to_annotation=Export to annotation layer... to_palette=Undock to_previsualize=Preview to_validate_coodinates=Validate coordinates. toc_reproject=Reproject layer... toda_la_tabla= todas=All todos=All todos_los_valores= todos_soportados=All supported tolerance=Tolerance tolerancia_incorrecta=Incorrect tolerance. tolumsa=HSL balance too_large_border=Border too large. too_long_name=Name too long. tools=Tools tooltip_copiar_al_portapapeles=Copy to clipboard tooltip_cortar_al_portapapeles=Cut to clipboard tooltip_pegar_desde_el_portapapeles=Paste from clipboard tooltips_enabled=Tooltips enabled topological_edition=Move shared vertex topology_clean_of_thiessen_edges=Cleaning edges of Voronoi polygons... topology_files_path=Default path for topology files\: topology_name=Topology name\: topology_status=Topology status\: total=Total total_route_cost=Total route cost transf=Transformation... transformMSS_error=This transformation type requires four bands. transformTM_error=The ETM+ transformation requires six bands. transform_lyr=Transform layer transformacion=Transformation... transformacion_capa=Layer's transformation\: transformacion_compuesta=Compound transformation transformacion_epsg=EPSG transformation transformacion_manual=Manual transformation transformacion_title=Multispectral transformation transformacion_vista=View transformation transformaciones_geograficas=Geographic transformations transformation=Transformation transformation_code=Transformation code transformation_name=Transformation name transformation_not_possible=Cannot transform between the selected reference systems. transformation_type=Transformation type\: transformations=Transformations transp_by_pixel=Per-pixel transparency transp_selection=Selective transparency transparencia=Transparency transparencia_pixel=Per-pixel transparency transparency=Transparency transparente=Transparent tratar_nodata_transparente=Use "no data" value for transparency triangle=triangle trim= true=True trying_to_add_a_non_TypeSymbolEditor_panel=Attempting to add a panel that is not of type 'TypeSymbolEditor'. turn= turn_prohibited_minus_1= two_or_more_fields_with_the_same_name=Two or more fields with the same name. two_panels_with_the_same_name=Two panels with the same name. txt_file=Text (*.txt, *.csv) type=Type type_field_text=Text field type_of_interleaving=Type of interleaving type_transformation=Transformation type ul=Upper left ultima_pagina= ultimo=Last ultimos_crs_utilizados=Recently used SRS umbral_error=RMS warning threshold umbralizar= unable_to_findout_server_version=Unable to determine server version. unable_to_findout_service_type=Unable to determine service type. unable_to_load_legend_from_XMLEntity=Failed to load legend from persistent XML entity unassigned_geometry_at_row=Unassigned geometry at row undefined_coordinate=Undefined coordinate undefined_coordinates=Undefined coordinates undefined_for_StylePreviewer_use=Undefined for style preview. Please use undo=Undo undo_error= undoredo=Undo/Redo functions ungroup=Ungroup unidades=Units unidades_area=Area units unit_factor=Unit factor unite_separate= units=Units units_of_annotations=Annotation units\: units_p=Units p unknown=Unknown unknown_error=Unknown error unknown_longitude_units=Unknown longitude units unknown_message=Unknown message unknown_response_format=Unknown response format. unknown_time_units=Unknown time units unknown_units=Unkown units unrecognized_field_name=Unrecognized field name. unsavedDataMessage= unsavedDataTitle= unsupported_crs=Unsupported SRS. unsupported_format=Unsupported format unsupported_legend=Unsupported legend type. unsupported_legend_file_format= unsupported_legend_file_version= unsupported_map_context_version=Unsupported Web Map Context version. unsupported_set_of_settings=Unsupported settings. unsupported_symbol_type= unsupported_version=Unsupported version. untitled=Untitled update_catalog=Refresh list of services upperCoordinates=Upper ur=Upper right url=URL us_country=United States usar_georeferenciacion_de_la_imagen=Apply image's georeferencing usar_marco=Draw border usar_rango=Use a range usar_titulo=Use title useHighLightConfigurationLabel= use_custom_size=Custom size use_decorator=Use decoration use_default_symbol=Default symbol use_full_extent=Use full extent use_interpolation_method=Use interpolation method use_line_length=Use line length use_outline=Use outline use_symbol=Use symbol use_the_same_scale_range_as_the_feature_layer=Use the same scale range as the layer's features use_view_size=Size of view user=User user_defined_labels=Advanced settings username= usuario=User usupported_layer_type=Unsupported layer type utilizar_margenes_impresora=Use printer margins ux=Position X uy=Position Y v1x=V1 X v1y=V1 Y v2x=V2 X v2y=V2 Y vacia=Empty validate_expression=Validate expression validate_filter_expression_explanation=Choose whether to validate filter expression valor=Value valor_general="No data" value valor_incorrecto= valor_max=Max valor_medio=Mean valor_min=Min valor_pixel=Pixel value value=Value value_fields=Fields with values value_not_found=Value not found value_not_valid=Invalid field content. values= values_field=Value fields values_of_the_selected_field_explanation=Known values of the selected fields.\nString (i.e. text) values must be enclosed in single quotation marks (e.g. 'text'). variable=Variable variables_sin_asignar=Found variables without assigned band. Please revise list of variables. variance_statistics=Variance-covariance matrix varianza=Variance variation_by=Styles vecino_+_proximo=Nearest neighbor vecino_cercano=Nearest neighbor vectbbox=Select all inside bounding box vectinside=Set all values outside regions to "no data" vector_generation=Vector generation vector_layer=Vector layer vector_type=Vector type vectorial=Vectorial vectorization=Vectorization... ventana=Window ventana_proyecto=Project window ver_bandas=Show image bands ver_error_capa=Show errors ver_tabla_atributos=Show attribute table ver_tags=Show tags ver_tooltip=Show project window verdetalles=Show details verify=Verify version=Version version_conflict=Version conflict vertex=Vertex vertical=Vertical vertical_space=Vertical space vertices= view=View view_3D_properties= view_not_found=View not found view_panel=Georeferencing view view_projection= views_panel=View visible=Visible visibles=Visible vista=View vista_datasource=View's extent vista_previa=Preview vistas=Views visualizacion=Visualization visualizar_cuadricula=Show grid visualization=Visualization voronoi_diagram_layer_message=Computing Voronoi diagram... warning=Warning warning_message=Warning warning_no_preview=Warning\: This filter does not support previewing. warning_title=Warning warning_you_must_input_the_exact_name_this_difference_between_capital_letters_and_small_letters=Please use exact spelling. Capitalization matters. warnings=Warnings wavelets=Wavelets wavelets_atrous=A trous wavelets wcsColumn=Coverage wcsError=Error loading coverage wcsLoad=WCS loading wcs_cant_connect=Cannot connect to WCS provider. wcs_properties=WCS properties... wcs_server_error=WCS server error wcs_server_timeout=Server time-out web_map_context=Web Map Context... web_map_context_settings=Web Map Context properties wfs= wfsColumn=Feature wfsError=Error loading feature wfsLoad=WFS loading wfs_properties=WFS properties... wfs_server_error=WFS server error wfs_srs_unknown=The layer's SRS is not supported.\nLayer will be loaded without reprojection. wfst_expiry_time=Editing time-out wfst_layer_cant_be_locked=Cannot start a WFST session.\nThe layer may have been locked by another user. wfst_layer_cant_be_saved_message=Editing time-out reached. You may continue editing the layer\nand export it but changes can no longer be committed to the server. wfst_layer_cant_be_saved_window=Time-out wfst_minutes_to_expiry=Editing time-out in minutes wfst_srs_based_on_XML=SRS from XML file wfst_start_editing=Start WFST editing wfst_start_editing_warning=Sets the limit for the time available to edit this layer. If editing\nis not finished before exceeding the time limit, changes cannot \nbe commited to the server. wfst_support_lockfeature=The server supports feature locking. wfst_transaction_error=Transaction error. wfst_without_lock=No locking where= where_clause=SQL WHERE clause white=White white_Textbox=White textbox width=Width will_be_truncated=Will be truncated will_use_a_default_array_of_items=Will use an array of default items. will_use_a_default_model=Will use a default model. will_use_a_default_vector_of_items=Will use a vector of default items. with_map=With reference map\: without_limit=No limit without_map=Without reference map wkt=WKT wmsColumn=Map wmsError=WMS map loading error wms_cant_connect=Cannot connect to WMS provider wms_not_queryable=Server does not accept this type of query. wms_properties=WMS properties... wms_server_error=WMS server error wms_transparency=Apply transparency working_area=Working area\: worldx=World X worldy=World Y write_here_a_filter_expression=Enter an SQL WHERE style expression manually or use the buttons to compose one. write_to_file=Writing results to file. This may take a while. Please be patient... writing_project=Saving project file writinng_project= writinng_project= writtingdbf=Writing DBase file... wrong_characters=There are wrong characters in the text.\n It could be a problem. wrong_url=Invalid or unreachable URL wrote_project=Project file saved www.gvsig#Translations= www.gvsig\#Translations= wz_anterior=Previous wz_cancel=Cancel wz_fin=Finish wz_siguiente=Next wz_titulo=User-defined SRS x=X xOffset=X offset x_Rotation=Rotation around X-axis (deg) x_Translation=Translation along X-axis (m) x_coordinate_from_area_left_bottom_vertex=X-coordinate of area's bottom left corner. x_coordinate_from_area_right_up_vertex=X-coordinate of area's upper right corner. x_offset=X offset xmax=Maximum X xmin=Minimum X xrange=X-coordinate range y=Y yOffset=Y offset y_Rotation=Rotation around Y-axis (deg) y_Translation=Translation along Y-axis (m) y_coordinate_from_area_left_bottom_vertex=Y-coordinate of area's bottom left corner. y_coordinate_from_area_right_up_vertex=Y-coordinate of area's upper right corner. y_en=and in y_offset=Y offset yard=Yards yards=Yards yellow=Yellow yes=Yes ymax=Maximum Y ymin=Minimum Y yrange=Y-coordinate range zProfile=Spectral profile z_Rotation=Rotation around Z-axis (deg) z_Translation=Translation along Z-axis (m) zone=Zone zoom= zoomButtonTooltip= zoom_in_factor=Zoom-in factor zoom_mas=Increase zoom level zoom_mas_vista= zoom_menos=Decrease zoom level zoom_out_factor=Zoom-out factor zoom_route=Zoom to zooms= zooms_control=Zoomed view