Application: gvSIG desktop » gvSIG tools: Vector editing

key_natural_cubic_splinesstart_editing = Start editing

end_editing = End editing

insert_point = Insert point

insert_multipoint = Insert MultiPoint

insert_line = Insert line

insert_arc = Insert arc

insert_arc_by_center = Insert arc by center

insert_arc_three_points = Insert arc by three points

insert_circle_cr=Insert circle (center & radius)

insert_circumference_cr=Insert circumference (center & radius)

insert_circle_cd=Insert circle (center & diameter)

insert_circumference_cd=Insert circumference (center & diameter)

insert_circle_2p = Insert circle (two point)key_natural_cubic_splines

insert_circle_3p = Insert circle (three point)

insert_circle_tantanradius = Insert circle (tan, tan, radius)

insert_circumference_2p = Insert circumference (two points)

insert_circumference_3p = Insert circumference (three points)

insert_circumference_tantanradius = Insert circumference (tan, tan, radius)

insert_ellipse = Insert ellipse

insert_filled_ellipse = Insert filled ellipse

insert_ellipse_center_axes = Insert ellipse (center & axes)

insert_filled_ellipse_center_axes = Insert filled ellipse (center & axes)

insert_polyline = Insert polyline

insert_polygon = Insert polygon

insert_regular_polygon = Insert regular polygon

insert_filled_regular_polygon = Insert filled regular polygon

insert_rectangle = Insert rectangle

insert_filled_rectangle = Insert filled rectangle

insert_spline= Insert spline curve

insert_filled_spline = Insert filled spline

insert_rectangular_matrix = Rectangular matrix of geometries

insert_polar_matrix = Polar matrix of geometries

modify_internal_polygon = Internal polygon

modify_explode_geometry = Explode geometry

modify_move = Move geometry

modify_rotate = Rotate geometry

modify_duplicate = Duplicate geometry

modify_divide = Divide

modify_measure = Measure

modify_split_line = Split line open by a point

modify_split = Split geometry

modify_scale = Scale geometry

modify_simplify = Simplify geometry

insert_autopolygon = Insert autopolygon

modify_join = Join geometries

modify_stretch = Stretch geometry

modify_extend_line = Extend line to object

modify_trim_lines_by_cutting_edges = Trim lines by cutting edges

modify_trim_polygons = Trim polygons by object

modify_edit_vertex = Edit vertex

modify_convert_to_polyline= Convert to polyline

modify_reverse_direction=Reverse direction

modify_align_edges=Align edges

modify_chamfer=Chamfer

uniqueselection = Select only one geometry

selectvertex = Select a vertex

new_position = New position

new_position_or_z_value = New position or Z value

insert_vertex = Insertr vertex

remove_vertex = Remove vertex

selection=Selection

invalid_option=Invalid option

center=Center

radius=Radius

diameter=Diameter

save_changes_performed=Save changed performed

discard= Discard

discard_and_loose_changes= Discard changes and loose changes

continue= Continue

do_not_save_yet_stay_in_editing_mode= Don't save changes and continue editing

indicate_new_point= Indicate new point

arc_mode = Arc mode

line_mode = Line mode

select_new_tool= Select a new tool

draw_geometry_to_interal_polygon= Select tool to draw a internal polygon

draw_geometry_to_autopolygon = Select tool to draw an autopolygon

draw_geometry_to_split = Select tool to split selected geometries

draw_geometry_to_select_vertex = Select a polygonal tool to select vertex

save = Save

discard = Discard

continue = Continue

export = Export

ask_save_layer = Would you really like to save the layer

can_not_write_layer =  There are not writer for this layer format or you don't have write permissions.\nWhat do you want to do?

save_changes_performed = Save changed performed

discard_and_loose_changes = Discard and loose changes

export_to_another_format = Export to another format

do_not_save_yet_stay_in_editing_mode = Do not save changes and continue editing

first_point= First point

second_point= Second point

start_point= Start point

middle_point= Middle point

third_point= Third point

end_point= End point

first_point_A_axis = First point of A axis

second_point_A_axis = Second point of A axis

length_of_B_axis= Length of B axis

length_of_B_semiaxis= Length of B semiaxis

point_A_axis = Punto del eje A

inscribed = Inscribed

circumscribed = Circumscribed

sides_of_regular_polygon = Indicate sides of regular polygon

center_of_regular_polygon = Center of regular polygon

point_of_circle = Point of circle of  polygon

first_point_of_the_first_line = First point of the first line

second_point_of_the_first_line = Second point of the first line

first_point_of_the_second_line = First point of the second line

second_point_of_the_second_line = Second point of the second line

point_near_center = Point near center

point_near_tangent_in_first_geometry = Point near tangent in first geometry

point_near_tangent_in_second_geometry = Point near tangent in second geometry

radius = Radius

sides = Sides

key_arc_mode = A

key_line_mode = L

key_close = C

key_finish = F

key_inscribed = I

key_circumscribed = C

key_remove_last_point = R

remove_last_point = Remove last point

close_polyline = Close polyline

close_spline = Close spline curve

new_point = New point

new_value = New value

finished = finished

center_of_rotation=Center of rotation

angle_of_rotation=Angle of rotation (degree)

origin_point = Origin

tolerance = Tolerance

line_to_extend = Select line to extend

line_to_trim = Select line to trim

modify_smooth_line = Smooth line

intermediate_steps_1_9 = Intermediate steps [1,9]

algorithm = algorithm

natural_cubic_splines = Natural cubic splines

bezier_curves = Bezier curves

b_splines = B-splines

key_natural_cubic_splines = NCS

key_bezier_curves = BC

key_b_splines = BS

columns_number = Number of columns

rows_number = Number of rows

distance_between_columns = Distance between columns

distance_between_rows = Distance between rows

key_yes= Y

key_no = N

yes = Yes

no = No

number_of_total_elements = Number of total elements

rotate_elements = Rotate elements?

angle_between_elements = Angle between elements

modify = modify

insert = insert

Modify = Modify

Insert = Insert

_The_layer_is_reproyected_on_the_fly_Not_all_editing_tools_work_properly_When_you_finish_editing_will_only_export_the_changes_to_another_layer=The layer is reproyected on the fly.\nNot all editing tools work properly.\nWhen you finish editing will only export the changes to another layer will be allowed.

_Do_you_want_to_finish_editing_If_not_exported_the_data_the_changes_will_be_lost=Do you want to finish editing?\nIf not exported the data and finish editing, the changes will be lost.

_Cant_finish_editing_See_the_error_log_for_more_information=Unable to finish editing.\nSee the error log for more information

_The_layer_can_not_be_written_When_you_finish_editing_will_only_export_the_changes_to_another_layer=The layer can not be written.\nWhen you finish editing will only export the changes to another layer will be allowed.

remove_selected_geometries=Remove selected geometries

_Use_a_point_previously_captured=Use a point previously captured.

_Enter_the_coordinates_manually=Enter the coordinates manually.

start_angle = Start angle

sweep_angle = Sweep angle

center_point = Center point

_graphic_distance = Graphic distance

geometry_to_extend_to=Geometry to extend to

geometry_to_trim_with=Geometry to trim with

shearing_point=Shearing point

_dismiss=Dismiss

_List_of_layers_to_finish_editing=List of layers to finish editing

_The_following_layers_dismiss_the_changes=The following layers dismiss the changes: \n

_Dismiss_information=Dismiss information

_finish_edition=Finish edition

_align_edges=Align edges

_geometry_base=Geometry base

_geometry_to_align=Geometry to align

_align_mode=Align mode

_up=Up

_down=Down

_left=Left

_right=Right

_horizontal_centering=Horizontal

_vertical_centering=Vertical

_both_centering=Both centers

_short_up=U

_short_down=D

_short_left=L

_short_right=R

_short_horizontal_centering=H

_short_vertical_centering=V

_short_both_centering=C

_do_copy_question=Do copy?

_delete_original_geometries=Delete original geometries

_do_copy=Do copy

_yes=Yes

_no=No

_short_yes=Y

_short_no=N

_Modify_paste_from_clipboard=Paste from clipboard

_Location=Location

_Clipboard=Clipboard

_Copy_alphanumeric_attributes=Copy alphanumeric attributes

copyAlphanumericAttributes=Copy alphanumeric attributes

_Dont_copy_alphanumeric_attributes=Don't copy alphanumeric attributes

_Editing_tool_options=Editing tool options

_Vector_editing_tool_options=Vector editing tool options

_Activate_an_editing_tool_to_see_your_options_here=Activate an editing tool to see your options here.

_Options=Options

_Apply=Apply

_Default_values=Default values

_Table=Table

_Tool=Tool

_insertion_point=Insertion point

_measure=measure

_align=align

_dont_align=don't align

_rotate_field=rotate field

segments_number=segments number

_point_options=Point options

_Direction=Direction

equidistant_copies=Equidistant copies

_save=Save

_export=Export

_Origin_point=Origin

_Key_origin_center=C

_Origin_center=Center

_Proportional_scale_question=Proportional scale?

_Proportional_scale=Proportional scale

_Scale_factor_or_reference_point = Scale factor or reference point

_Horizontal_scale_factor_or_reference_point=Horizontal scale factor or reference point

_Second_scale_point = Second scale point

_Vertical_scale_factor=Vertical scale factor

_Pivot_center=Center

_Key_pivot_center=C

_Rotate_mode=Mode

_Rotate_active_angle_mode=Angle

_Rotate_two_points_mode=Two points

_Rotate_three_points_mode=Three points

_Key_rotate_active_angle_mode=A

_Key_rotate_two_points_mode=2

_Key_rotate_three_points_mode=3

_Pivot_point=Pivot point

_Angle=Angle

_Start_of_rotation=Start of rotation

_End_of_rotation=End of rotation