gvsig-vectorediting / org.gvsig.vectorediting / trunk / org.gvsig.vectorediting / org.gvsig.vectorediting.app / org.gvsig.vectorediting.app.mainplugin / src / main / resources-plugin / i18n / text_en.properties @ 2802
History | View | Annotate | Download (8.52 KB)
1 |
key_natural_cubic_splinesstart_editing = Start editing |
---|---|
2 |
end_editing = End editing |
3 |
insert_point = Insert point |
4 |
insert_multipoint = Insert MultiPoint |
5 |
insert_line = Insert line |
6 |
insert_arc = Insert arc |
7 |
insert_arc_by_center = Insert arc by center |
8 |
insert_arc_three_points = Insert arc by three points |
9 |
insert_circle_cr=Insert circle (center & radius) |
10 |
insert_circumference_cr=Insert circumference (center & radius) |
11 |
insert_circle_2p = Insert circle (two point)key_natural_cubic_splines |
12 |
insert_circle_3p = Insert circle (three point) |
13 |
insert_circle_tantanradius = Insert circle (tan, tan, radius) |
14 |
insert_circumference_2p = Insert circumference (two points) |
15 |
insert_circumference_3p = Insert circumference (three points) |
16 |
insert_circumference_tantanradius = Insert circumference (tan, tan, radius) |
17 |
insert_ellipse = Insert ellipse |
18 |
insert_filled_ellipse = Insert filled ellipse |
19 |
insert_ellipse_center_axes = Insert ellipse (center & axes) |
20 |
insert_filled_ellipse_center_axes = Insert filled ellipse (center & axes) |
21 |
insert_polyline = Insert polyline |
22 |
insert_polygon = Insert polygon |
23 |
insert_regular_polygon = Insert regular polygon |
24 |
insert_filled_regular_polygon = Insert filled regular polygon |
25 |
insert_rectangle = Insert rectangle |
26 |
insert_filled_rectangle = Insert filled rectangle |
27 |
insert_spline= Insert spline curve |
28 |
insert_filled_spline = Insert filled spline |
29 |
insert_rectangular_matrix = Rectangular matrix of geometries |
30 |
insert_polar_matrix = Polar matrix of geometries |
31 |
modify_internal_polygon = Internal polygon |
32 |
modify_explode_geometry = Explode geometry |
33 |
modify_move = Move geometry |
34 |
modify_rotate = Rotate geometry |
35 |
modify_duplicate = Duplicate geometry |
36 |
modify_divide = Divide |
37 |
modify_measure = Measure |
38 |
modify_split_line = Split line open by a point |
39 |
modify_split = Split geometry |
40 |
modify_scale = Scale geometry |
41 |
modify_simplify = Simplify geometry |
42 |
insert_autopolygon = Insert autopolygon |
43 |
modify_join = Join geometries |
44 |
modify_stretch = Stretch geometry |
45 |
modify_extend_line = Extend line to object |
46 |
modify_trim_lines_by_cutting_edges = Trim lines by cutting edges |
47 |
modify_trim_polygons = Trim polygons by object |
48 |
modify_edit_vertex = Edit vertex |
49 |
modify_convert_to_polyline= Convert to polyline |
50 |
modify_reverse_direction=Reverse direction |
51 |
modify_align_edges=Align edges |
52 |
uniqueselection = Select only one geometry |
53 |
selectvertex = Select a vertex |
54 |
new_position = New position |
55 |
new_position_or_z_value = New position or Z value |
56 |
insert_vertex = Insertr vertex |
57 |
remove_vertex = Remove vertex |
58 |
selection=Selection |
59 |
invalid_option=Invalid option |
60 |
center=Center |
61 |
radius=Radius |
62 |
save_changes_performed=Save changed performed |
63 |
discard= Discard |
64 |
discard_and_loose_changes= Discard changes and loose changes |
65 |
continue= Continue |
66 |
do_not_save_yet_stay_in_editing_mode= Don't save changes and continue editing |
67 |
indicate_new_point= Indicate new point |
68 |
arc_mode = Arc mode |
69 |
line_mode = Line mode |
70 |
select_new_tool= Select a new tool |
71 |
draw_geometry_to_interal_polygon= Select tool to draw a internal polygon |
72 |
draw_geometry_to_autopolygon = Select tool to draw an autopolygon |
73 |
draw_geometry_to_split = Select tool to split selected geometries |
74 |
draw_geometry_to_select_vertex = Select a polygonal tool to select vertex |
75 |
save = Save |
76 |
discard = Discard |
77 |
continue = Continue |
78 |
export = Export |
79 |
ask_save_layer = Would you really like to save the layer |
80 |
can_not_write_layer = There are not writer for this layer format or you don't have write permissions.\nWhat do you want to do? |
81 |
save_changes_performed = Save changed performed |
82 |
discard_and_loose_changes = Discard and loose changes |
83 |
export_to_another_format = Export to another format |
84 |
do_not_save_yet_stay_in_editing_mode = Do not save changes and continue editing |
85 |
first_point= First point |
86 |
second_point= Second point |
87 |
start_point= Start point |
88 |
middle_point= Middle point |
89 |
third_point= Third point |
90 |
end_point= End point |
91 |
first_point_A_axis = First point of A axis |
92 |
second_point_A_axis = Second point of A axis |
93 |
length_of_B_axis= Length of B axis |
94 |
length_of_B_semiaxis= Length of B semiaxis |
95 |
point_A_axis = Punto del eje A |
96 |
inscribed = Inscribed |
97 |
circumscribed = Circumscribed |
98 |
sides_of_regular_polygon = Indicate sides of regular polygon |
99 |
center_of_regular_polygon = Center of regular polygon |
100 |
point_of_circle = Point of circle of polygon |
101 |
first_point_of_the_first_line = First point of the first line |
102 |
second_point_of_the_first_line = Second point of the first line |
103 |
first_point_of_the_second_line = First point of the second line |
104 |
second_point_of_the_second_line = Second point of the second line |
105 |
point_near_center = Point near center |
106 |
point_near_tangent_in_first_geometry = Point near tangent in first geometry |
107 |
point_near_tangent_in_second_geometry = Point near tangent in second geometry |
108 |
radius = Radius |
109 |
sides = Sides |
110 |
key_arc_mode = A |
111 |
key_line_mode = L |
112 |
key_close = C |
113 |
key_finish = F |
114 |
key_inscribed = I |
115 |
key_circumscribed = C |
116 |
key_remove_last_point = R |
117 |
remove_last_point = Remove last point |
118 |
close_polyline = Close polyline |
119 |
close_spline = Close spline curve |
120 |
new_point = New point |
121 |
new_value = New value |
122 |
finished = finished |
123 |
center_of_rotation=Center of rotation |
124 |
angle_of_rotation=Angle of rotation (degree) |
125 |
origin_point = Origin |
126 |
scale_factor_or_reference_point = Scale factor or reference point |
127 |
second_scale_point = Second scale point |
128 |
tolerance = Tolerance |
129 |
line_to_extend = Select line to extend |
130 |
line_to_trim = Select line to trim |
131 |
modify_smooth_line = Smooth line |
132 |
intermediate_steps_1_9 = Intermediate steps [1,9] |
133 |
algorithm = algorithm |
134 |
natural_cubic_splines = Natural cubic splines |
135 |
bezier_curves = Bezier curves |
136 |
b_splines = B-splines |
137 |
key_natural_cubic_splines = NCS |
138 |
key_bezier_curves = BC |
139 |
key_b_splines = BS |
140 |
columns_number = Number of columns |
141 |
rows_number = Number of rows |
142 |
distance_between_columns = Distance between columns |
143 |
distance_between_rows = Distance between rows |
144 |
key_yes= Y |
145 |
key_no = N |
146 |
yes = Yes |
147 |
no = No |
148 |
number_of_total_elements = Number of total elements |
149 |
rotate_elements = Rotate elements? |
150 |
angle_between_elements = Angle between elements |
151 |
modify = modify |
152 |
insert = insert |
153 |
Modify = Modify |
154 |
Insert = Insert |
155 |
_The_layer_is_reproyected_on_the_fly_Not_all_editing_tools_work_properly_When_you_finish_editing_will_only_export_the_changes_to_another_layer=The layer is reproyected on the fly.\nNot all editing tools work properly.\nWhen you finish editing will only export the changes to another layer will be allowed. |
156 |
_Do_you_want_to_finish_editing_If_not_exported_the_data_the_changes_will_be_lost=Do you want to finish editing?\nIf not exported the data and finish editing, the changes will be lost. |
157 |
_Cant_finish_editing_See_the_error_log_for_more_information=Unable to finish editing.\nSee the error log for more information |
158 |
_The_layer_can_not_be_written_When_you_finish_editing_will_only_export_the_changes_to_another_layer=The layer can not be written.\nWhen you finish editing will only export the changes to another layer will be allowed. |
159 |
remove_selected_geometries=Remove selected geometries |
160 |
_Use_a_point_previously_captured=Use a point previously captured. |
161 |
_Enter_the_coordinates_manually=Enter the coordinates manually. |
162 |
start_angle = Start angle |
163 |
sweep_angle = Sweep angle |
164 |
center_point = Center point |
165 |
_graphic_distance = Graphic distance |
166 |
geometry_to_extend_to=Geometry to extend to |
167 |
geometry_to_trim_with=Geometry to trim with |
168 |
shearing_point=Shearing point |
169 |
_dismiss=Dismiss |
170 |
_List_of_layers_to_finish_editing=List of layers to finish editing |
171 |
_The_following_layers_dismiss_the_changes=The following layers dismiss the changes: \n |
172 |
_Dismiss_information=Dismiss information |
173 |
_finish_edition=Finish edition |
174 |
_align_edges=Align edges |
175 |
_geometry_base=Geometry base |
176 |
_geometry_to_align=Geometry to align |
177 |
_align_mode=Align mode |
178 |
_up=Up |
179 |
_down=Down |
180 |
_left=Left |
181 |
_right=Right |
182 |
_horizontal_centering=Horizontal |
183 |
_vertical_centering=Vertical |
184 |
_both_centering=Both centers |
185 |
_short_up=U |
186 |
_short_down=D |
187 |
_short_left=L |
188 |
_short_right=R |
189 |
_short_horizontal_centering=H |
190 |
_short_vertical_centering=V |
191 |
_short_both_centering=C |
192 |
_do_copy_question=Do copy? |
193 |
_delete_original_geometries=Delete original geometries |
194 |
_do_copy=Do copy |
195 |
_yes=Yes |
196 |
_no=No |
197 |
_short_yes=Y |
198 |
_short_no=N |
199 |
_Modify_paste_from_clipboard=Paste from clipboard |
200 |
_Location=Location |
201 |
_Clipboard=Clipboard |
202 |
_Copy_alphanumeric_attributes=Copy alphanumeric attributes |
203 |
copyAlphanumericAttributes=Copy alphanumeric attributes |
204 |
_Dont_copy_alphanumeric_attributes=Don't copy alphanumeric attributes |
205 |
_Editing_tool_options=Editing tool options |
206 |
_Vector_editing_tool_options=Vector editing tool options |
207 |
_Activate_an_editing_tool_to_see_your_options_here=Activate an editing tool to see your options here. |
208 |
_Options=Options |
209 |
_Apply=Apply |
210 |
_Default_values=Default values |
211 |
_Table=Table |
212 |
_Tool=Tool |
213 |
_insertion_point=Insertion point |
214 |
_measure=measure |
215 |
_align=align |
216 |
_dont_align=don't align |
217 |
_rotate_field=rotate field |
218 |
segments_number=segments number |
219 |
_point_options=Point options |
220 |
_Direction=Direction |